Horizontal machining center

DMG NHX 5000

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) Hnjdpfx Aeyt Hwzjgcjk • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measuring system; Linear scale standard • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating time: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, number of slots in tool magazine: 180, Work piece up to 1530 x 1295 x 3500 Kg Tool size up to 650 mm length and 30 Kg Tool size up to 400 x 250 mm and 30 Kg Extende feed rate up to 15 kN-100% ED Coolant Filtration     BLUM Laser NT 3D Quick ser MPC protection 3D Measuring probe DXF Import   Tool package 180 Tool HSK-100A 2 x Cast iron angle plates 1500 mm   15000 Working hours 1e owner machine  Hodpjx Sqptjfx Agcsnk X - Travel: 1600mm Y - Travel: 1100mm Z - Travel: 1400mm B-Axis indexing: 360000° Table Length: 1250mm Table Width: 1000mm Table load: 3000 Number of pallets: 2 Feed rate X-Axis: 60000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: HSK-100ISO/Bt/Mk Power on spindle: 52kW Speeds / ranges: 12000Rpm ATC / revolver: 180 Number of controlled axis:4 Length: 9170mm Width: 6320mm Height: 3969mm Weight: 39500kg

Condition: excellent (used), Year of construction: 2017, operating hours: 6,473 h, functionality: fully functional, machine/vehicle number: 12780000173, DMG MORI NHX 5000 About the Machine: High-precision and reliable machine. Available immediately. Technical Data: - Control: Siemens 840D - Travel X-, Y-, Z-Axis: 730/730/880 mm - C-Axis Travel: 360° - Rotary Table Clamping Surface: 500x500 mm - Spindle Speed: 20-15,000 rpm - Tool Interface: SK40 - Tool Magazine with 60 positions - Pallet changer with 2 stations - Automation-ready Equipment: - Internal cooling, 70 bar with belt filter system - Work area rinsing - BLUM measuring probe Hnjdoyhwpwopfx Agcok - Rinse gun - Chip conveyor - Signal light - Handheld control device Inspection / test under power on site can be arranged by appointment. We are happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH specialize in: - Service - Maintenance - Overhauling - Automation for DMG machines and other renowned manufacturers. We accompany you—from the machine purchase, through transport and installation, all the way to commissioning and ongoing maintenance or repair work. You can rely on us.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,214 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller model: SINUMERIK 840 D sl/operate, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 730 mm Travel Z-axis: 880 mm Max. main spindle speed: 20,000 rpm Max. torque: 250/104 Nm Tool holder: HSK-A63 Distance spindle center to table: 80 - 810 mm Distance spindle nose to table center: 70 - 950 mm Number of pallets: 2 Pallet size: 500 mm x 500 mm Max. workpiece weight: 500 kg Pallet change time: 9.0 s Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm Number of tool stations: 40 Tool change time (tool to tool): 2.5 s Tool change time (chip to chip): 4.4 - 10.0 s Max. tool diameter: 70 mm Max. tool length: 550 mm Max. tool weight: 12 kg Rapid traverse speed: 60,000 mm/min MACHINE DETAILS Hjdpsyapvajfx Agcenk Control: SINUMERIK 840 D sl/operate High-pressure coolant: 70 bar Dimensions & Weight Floor space required: 6,000 mm x 4,000 mm x 2,700 mm Machine weight: 12.0 t Operating hours: 5,214 h EQUIPMENT Pallet changer Coolant tank Tool breakage monitoring

Condition: ready for operation (used), Year of construction: 2014, operating hours: 27,608 h, controller manufacturer: SIEMENS, This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 30-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine. Hsdex U D Hqjpfx Agcenk • Tools: 30 pcs • Incl tools shown on the pictures • Excl barfeeder

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min Hnodpfx Agjvu E R Socek total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Hnodpfx Agsharwvjcjk Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar Hnodpfsymcvmox Agcek • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2011, Travel X/Y/Z: 1000mm/500mm/635mm, tool holder: BT40, spindle speed: 10000rpm, tool positions: 40, control: Haas, spindle hours: approx. 4500h. 3-axis robot System 3R WorkPartner, year of manufacture: 2005, transfer weight: 80kg, stroke: 1500mm, pallet positions: 20. Including System 3R GPS 240 zero-point clamping system, tool measurement, tool breakage control, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible. Hedpfx Aexg Riaogcjnk

Condition: used, Year of construction: 2007, operating hours: 73,090 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Siemens, controller model: 840D powerline, table width: 380 mm, table length: 500 mm, overall weight: 6,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 24,649 h, number of slots in tool magazine: 30, input voltage: 400 V, number of axes: 5, Equipment: chip conveyor, For sale is a machining center from manufacturer Deckel Maho, model DMU 50, in well-maintained and technically flawless condition. The machine has been serviced regularly and is in excellent condition both visually and mechanically. It is fully operational, tested, and ready for immediate use. Additional equipment: - Paper band filter - Coolant system With our all-inclusive package, we personally handle the complete service for you upon request – from delivery to the commissioning of your new machine. This includes unloading, placement, and alignment of the machining center. Afterwards, our experienced service technicians carry out professional commissioning, perform all necessary function tests, and ensure your machine operates reliably and precisely. Furthermore, we offer tailored training sessions for your employees so that you can maximize the potential of your machine from day one. Even after installation, we remain at your service—be it for maintenance, technical questions, or future upgrades. With our all-inclusive package you have nothing to worry about – we ensure everything runs smoothly so you can focus entirely on your production. Optionally, you can also purchase extraction systems, attachments, and accessories from us – including high-quality Donaldson extraction units – to make your production even more efficient and clean. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians, specializing in Mazak machines as well as other brands. We place great value on personal support and continue to assist you even after the purchase. You are also welcome to inspect and test the machine under power at our facility at any time. We cordially invite you to visit us and see the condition and functionality of the machine for yourself. Hedpfx Ajxwtp Rogcsnk With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.