Gildemeister MSL 60/7 Linear, year 2011, with FMB Turbo 5-55 (Internal number 231180)

DMG MSL 60/7

Condition: good (used), Year of construction: 2014, Main spindle: Spindle speed: 5,000 rpm Spindle bore: 65 mm Nodpfx Aaeyt Dv Ieaecr Bar capacity: 60 mm Sub spindle: Spindle speed: 5,000 rpm Swing diameter: 42 mm Travel: Travel X1 / X2 / X3: 60 mm Travel X4: 130 mm Travel Z2: 80 mm Travel Z3: 80 mm Travel Z4: 340 mm Total weight: 3,500 kg Chip conveyor IEMCA bar feeder Radially driven tool holders Driven drilling and milling units 4-position basic tool holder, slide 3 Drilling and milling device Axially driven unit Control system: Fanuc i31

Condition: used, Year of construction: 2015, operating hours: 10,700 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, nominal power (apparent): 48 kVA, controller model: Heidenhain TNC 640, table width: 800 mm, table length: 650 mm, rotary table diameter: 650 mm, overall weight: 11,600 kg, spindle speed (max.): 20,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, We are offering this used DMG MORI DMU 75 monoBLOCK universal machining center, year of manufacture 2015. Machine type: DMU 75 monoBLOCK Serial number: 12430004943 Ncodpfxsy Dq Hpe Aaaor Year of manufacture: 2015 Maximum spindle speed: 20,000 rpm Weight: 11,600 kg Phases: L1, L2, L3, N, PE Connected load: 48 kVA Maximum operating current: 70 A Fuse protection: 80 A Short-circuit current: 0.80 kA Motor voltage: 440 ±10 V Mains voltage: 400 V Frequency: 50 Hz Auxiliary voltage AC: 230 V Auxiliary voltage DC: 24 V Internal coolant supply: 40 bar Tool holder: SK40 Operating hours: CNC on: 33,043 h Machine on: 30,184 h Program run: 13,471 h Operating time: 10,700 h If you have any questions or need further information, please do not hesitate to contact us. The machine is located in Osterode/Harz and can be inspected by appointment. This is a used machine and therefore sold with exclusion of any warranty.

Condition: excellent (used), Year of construction: 2014, DMG Mori MSL 60/7 CNC lathe Control: Fanuc 31i Year of manufacture: 2013 Main spindle: Spindle speed: 5,000 rpm Spindle bore: 65 mm Bar capacity: 60 mm Sub spindle: Spindle speed: 5,000 rpm Turning diameter: 42 mm Axis travels: X1 / X2 / X3 travel: 60 mm X4 travel: 130 mm Z2 travel: 80 mm Z3 travel: 80 mm Z4 travel: 340 mm Total weight: 3,500 kg Ncjdpfx Aaoxptyaoasr Chip conveyor IEMCA bar feeder Radially driven tooling Driven drilling and milling unit 4-position basic turret on slide 3 Drilling and milling unit Axially driven unit

Condition: excellent (used), Year of construction: 2015, Maximum turning diameter: approx. 380 mm Maximum swing over bed: approx. 675 mm Maximum turning length: approx. 500–540 mm Bar capacity (main spindle): approx. 76 mm (3″) MAIN SPINDLE Maximum spindle speed: 4,000 rpm Spindle motor power: 26 kW Spindle bore: approx. 77–88 mm Chuck: 8″ power chuck SUB SPINDLE Maximum spindle speed: 6,000 rpm Spindle motor power: approx. 11 kW Chuck: 6″ or 8″ power chuck Part transfer function AXES X-axis travel: approx. 230 mm Z-axis travel: approx. 575 mm C-axis on main spindle (full contouring and interpolation) TURRET / TOOLING Number of tool stations: 12 positions Live tooling capability (drilling and milling) Tool measurement system (Tool Eye) CNC control: Mazatrol Matrix Nexus EIA/ISO programming Conversational Mazatrol programming 19″ color LCD screen (touch screen) COOLING & CHIP HANDLING High pressure coolant through spindle: 15 bar External flood coolant via spindle nozzles Hinged belt chip conveyor with side discharge Complete coolant system with pumps and filters AUTOMATION Automatic bar feeder included Automatic chuck open/close Chuck status feedback via sensors Automatic part transfer between spindles OTHER FEATURES Nedpfx Aajyg It Deascr Pitch error compensation (X, Z) 3D tool compensation Helical interpolation Polar coordinate programming Thread cutting (G33) Workpiece coordinate rotation User macro functions Tool breakage detection MACHINE DIMENSIONS & WEIGHT (approx.) Machine weight: 5,000 – 5,500 kg Machine footprint: approx. 2,600 × 2,000 × 1,900 mm

Condition: used, Year of construction: 2003, turning diameter 190 mm turning length 620 mm control Fanuc Series 18i-TB Ncjdpfxexiy Aus Aaaor total power requirement 15 kW weight of the machine ca. 13,5 t dimensions of the machine ca. 5350X3350x2395 m

Condition: excellent (used), Year of construction: 2001, x-travel 185 mm z-travel 360 mm b-travel 460 mm control Mazatrol 640 T Maximum swing diameter 550 mm Ncjdpsyukf Sofx Aaasr Maximum turning diameter 280 mm workpiece weight max. 200 kg bar capacity 51 mm main spindle speed 35-6000 U/min milling head speed 25-4500 U/min rapid power traverse in X-and Z direction 30/33 m/min Rapid traverse B axis 30 m/min tool turret 12 Plätze weight of the machine ca. 4100 kg Capacity: Chuck size: 6 inches Max. swing diameter: 550 mm Standard turning diameter: 221 mm Max. turning diameter: 280 mm Max. bar capacity: 51 mm Distance between spindle nose and turret edge: 80–535 mm Main spindle: Speed: 35–6000 rpm Spindle bore: 61 mm Counter spindle: Speed: 35–6000 rpm Spindle bore: 52 mm Turret: Number of tools: 12 pieces Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling drill: 16 mm Milling tap: M12 End mills: 16 mm Milling spindle speed: 25–4,500 rpm Equipment/Accessories: Tool holders Tools Powered tools Turning tool holders Coolant system Chip conveyor Documentation

Condition: used, Year of construction: 2003, turning diameter max. 420 mm turning length 1090 mm Ncedpfx Ajucgyloaasr control FANUC Serie 18i-TB turning spindle Durchlass 108 mm 250 / 315 turning speed range 0-3750 U/min Feed speed 18/24 m/min. workpiece 12 quill stroke 100 mm diameter of quill 110 mm taper MK 4 number of driven tools 12 mm turning speeds 3000 U/min 22 nm coolant tank 140 l total power requirement 22/18,5 kW weight of the machine ca. 6500 KG

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 195125, turning diameter: 545 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, overall weight: 5,040 kg, The MAZAK Integrex 100-IV is a compact and highly precise CNC turning and milling center, designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling capabilities, along with integrated B and Y axes, this machine is especially suited for demanding precision parts in medical technology, mechanical engineering, and fine mechanics. Built in 2007, the machine is equipped with the powerful MAZATROL Matrix control. This controller supports both conversational and ISO programming, offering modern features for efficient and productive manufacturing. Technical data at a glance: The travel distances are 410 mm on the X-axis, 140 mm on the Y-axis (±70 mm), and 570 mm on the Z-axis. The B axis features a swivel range of 225°, enabling complex 5-sided machining. The C axis of the main spindle operates with high positioning accuracy of 0.001°. Ncodjyir I Repfx Aaaor The maximum turning and swing diameter is 545 mm each. The main spindle achieves speeds up to 6,000 rpm with an output of approx. 11 kW, enabling dynamic and precise turning operations. The integrated milling spindle works at speeds up to 12,000 rpm with an output of approx. 5.5 kW and is ideal for milling, drilling, and threading tasks. The machine features a tool changer (included) with a maximum tool length of 210 mm, as well as a Capto C6 tool holder, ensuring high rigidity and fast tool changes. Equipment: The package includes: • Chip conveyor • “Tool Eye” tool measurement system With a machine weight of approx. 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility – ideal for cost-effective complete machining in modern production environments. With us, you are in the best hands – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information subject to change.

Condition: used, Year of construction: 2008, x-travel 410 mm Nedpfxjyt R Ido Aaascr y-travel 570 mm z-travel 140 mm control Mazatrol Matrix Maximum working diameter 545 mm Maximum working length 519 mm main spindle speed 35 - 6000 U/min tool taper Capto C6 rapid traverse y/x/z axis 30/26/33 m/min Performance/capacity: Max. swivel range: 545 mm Max. machining diameter: 545 mm Max. outside diameter for bar work: 51 mm Max. machining length: 519 mm Max. workpiece weight: -Chuck work: 150 kg -Bar work: 200 kg Main spindle: Spindle speed: 35-6000 rpm Spindle bore diameter: 61 mm Max. torque: 161 Nm Tailstock: Rapid traverse: 8 m/min Travel range (advance/return): 434/281 mm Milling head: Milling head type: Single spindle with ATC Tool shank type: Capto C6 Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mm Milling spindle speed: 15-12000 rpm Equipment/accessories: -Chip conveyor -Mist extraction -Tools -Documentation

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Chip conveyor High-pressure pump Parts catcher Bar feeder interface Njdpfsyf Dtqox Aaajcr Tooling