CNC Turning- and Milling Center

DMG MORI NLX 2500 SY / 700

Condition: used, Year of construction: 2014, turning diameter max. 366 mm turning length 705 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A-8 spindle bearing diameter 140 mm spindle bore 91 mm max. usable bar diameter 80 mm chucking diameter 250 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm max. usable bar diameter ( - ) mm chucking diameter 170 mm x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. tool taper BMT 60 Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Kdodpfsu Hq Rlox An Ujl Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive

Condition: like new (used), Year of construction: 2022, CMZ TA 20 YS-640: YEAR: 2022 CNC: Fanuc 32i FEATURES: Swing over bed: 760 mm Swing over carriage: 600 mm Maximum turning diameter: 460 mm Maximum turning length: 640 mm Distance between chuck faces: 649 mm X-axis travel: 310 mm Z-axis travel: 640 mm Y-axis travel: +70 / –50 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min MAIN SPINDLE: SMW 210 mm chuck Bar capacity: 66 mm Spindle speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Spindle nose: ASA 6 A2 Spindle bore: 73 mm TURRET: 12-station turret, all positions live tooling Max. live tool speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm SUBSPINDLE (Servo): SMW 175 mm chuck Chuck bar capacity: 56 mm Max. usable bar: 52 mm Spindle speed: 4,500 rpm Power: 14 / 18 kW Ksdeyzfbvopfx An Usdl Spindle nose: ASA 6 A2 Machine dimensions: 2,542 x 1,760 x 2,120 mm Weight: 7,500 kg EQUIPMENT: SMW Autoblok BBD 250 chuck SMW Autoblok BBD 175 chuck Tool presetter Servomotor for sub-chuck Set of tool holders including 2 live tool holders Chip conveyor Cycle end lamp High-pressure pump Manual/automatic parts catcher arm (80 x 220 mm – 8 kg) Parts ejector for sub-spindle Interface for bar feeder and mist extractor Set of fixed and live tool holders Set of 3 jaws for each chuck TOP AUTOMAZIONI X-files S-364 SX bar feeder, 3,200 mm/diameter 64 mm MACHINE CONDITION: Machine in excellent, as-new condition! Can be seen in operation.

Condition: used, Year of construction: 2018, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter Kdedpfsvy Ig Hsx An Uol DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - C, Y-Axis

Condition: used, Year of construction: 2017, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 Kdodpoxzk Ifjfx An Ujl power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 4,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - C, Y-Axis - only 1.237h Spindle hours

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 12 [mm] - Max. machining length : 135 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 12 [mm] - Z stroke : 120 [mm] - Spindle speeds : 7000 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 5 END ATTACHMENT - Number of positions : 3 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] Kjdpfeuhaw Isx An Ujdl WEIGHT & DIMENSIONS - Machine floor space : 1500 X 770 [mm] - Machine weight : 1400 [kg] EQUIPMENT - CNC : Fanuc - 3 colors status lamp - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Electric transformer

Condition: excellent (used), Year of construction: 2012, operating hours: 10,168 h, functionality: fully functional, machine/vehicle number: NL254120635, CNC turning machine Kedpfxey Szwhs An Uodl Manufacturer: DMG MORI Type: NLX 2500 SY 700 with WH10 automation Year of manufacture: 2012 Turning diameter: 460 mm Turning length: 795 mm Control system: MORI SEIKI M730 BM Diameter over cross slide: 590/360 mm Spindle bore: 80 mm Travel distances X/Z: 260/795 mm Total power consumption: 40 kVA Machine weight: approx. 6.4 t Space requirement: approx. 3.994 x 3.056 x 2.187 m

Condition: excellent (used), Year of construction: 2015, operating hours: 6,147 h, functionality: fully functional, machine/vehicle number: 7023000088B, Machine type: CNC turning and milling center Manufacturer: DMG MORI Type: NLX2500SY/700 Year of manufacture: 2015 Control system: M730 UM Mapps CELOS Country of origin: Japan Delivery time: upon agreement Incoterms: EXW Additional information: CNC turning and milling center DMG MORI NLX2500SY/700 Maximum turning diameter: 356 mm Turning length: 705 mm Control system: M730 UM Mapps CELOS Swinging diameter over bed: 920 mm Swinging diameter over cross slide: 742 mm Spindle speed range - main spindle: 4,000 min/-1 Drive power - main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm Kdjdsy Sxukspfx An Ujl C-axis: 0.001° Spindle speed range - counter spindle: 6,000 min/-1 Drive power - counter spindle: 11 / 7.5 kW Spindle bore: 43 mm C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool positions: 12 Shank height for square tools: 25 mm Shank diameter of drills: 50 mm Turret indexing time: 0.27 sec. Spindle speed range - driven tools max.: 10,000 min -1 Drive power - driven tools: 5.5 / 4.2 kW Total power consumption: 41 kVA Machine weight: approx. 6.4 t Space requirement: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI - NLX 2500 SY / 700 - Counter spindle - Driven tool - C, Y-axis

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. The machine is still in production. Viewing possible by arrangement. Kdsdpfjqhkuksx An Uol

Condition: good (used), Year of construction: 2017, operating hours: 8,800 h, functionality: fully functional, machine/vehicle number: NL2561708843, number of spindles: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities: Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length max. (mm): 705 Turning diameter max. (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Bar working capacity (mm): 80 Tool Magazine: Tool stations: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5 / 4.9 / 4.2 (3 min / 5 min / continuous) Rapid traverse (m/min): 30 Main Spindle: Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5 / 18.5 / 15 (25% duty cycle / 50% duty cycle / continuous) Max. torque (Nm): 49 Sub-Spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11 / 7.5 (25% duty cycle / continuous) Max. torque (Nm): 22 Sub-spindle travel (mm): 734 Cooling System: Tank capacity (liters): 366 Equipment: Chip conveyor Signal tower Machine operating hours: Power on hours: 19,393 Cutting time: 8,800 Kdedpfx Anjyzxcgs Uol Rated power requirement (kVA): 48 Basic machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 The depicted tools, driven tools, and both chucks are not included in the scope of delivery.

Condition: like new (used), Year of construction: 2018, operating hours: 23,501 h, functionality: fully functional, turning length: 705 mm, turning diameter: 366 mm, spindle motor power: 18 W, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, rotational speed (max.): 10,000 rpm, total height: 2,395 mm, total length: 5,330 mm, total width: 4,100 mm, overall weight: 8,360 kg, CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Kjdpfx Asywtwwjn Uodl Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Measuring probe Paper band filter Working time hours Under power: 23.501 Cutting Time: 7.494 Potencial nominal kVA: 48 Basic machine dimensions / weight Length mm: 5.330 Width mm: 4.100 Height mm: 2.395 Weight kg: 8.360

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, Measuring Range X – axis 1200 mm Y – axis 2000 mm Z – axis 1000 mm Accuracy acc. ISO 10360 E = [2,6 + 4L/1000]µm DCC controller Renishaw UCC S5 JS box Renishaw MCU-5 (wireless on demand) Temperature sensor Renishaw Probe system Renishaw REVO 5-axis scanning probe Kdodpodv I Absfx An Uel Probe changer Renishaw (price REVO system new appx. € 80.000,--) Application software Inspect3D Inca V6 avzula version built 2014, retrofit 2017 with Revo

Condition: like new (used), Year of construction: 2018, operating hours: 23,501 h, functionality: fully functional, turning diameter over cross slide: 740 mm, turning diameter: 920 mm, spindle motor power: 18 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, milling spindle length: 91 mm, rotational speed (max.): 10,000 rpm, total height: 2,395 mm, total length: 5,330 mm, total width: 4,100 mm, swing diameter over cross slide: 740 mm, spindle nose: JIS A2-8, overall weight: 8,360 kg, CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Y-axis travel mm: 100 Rapid Feed Rate: 30 Kdedpswkf H Djfx An Usl Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Mist collector Workarea light Chuck foot switch (double) for main and counter spindle Coolant gun Measuring probe Paper band filter Preparación para trabajar con robot Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220mm x Hight 20mm Max. Weight by robot piece: 5,6kg Working time hours Under power: 23.501 Potencial nominal kVA: 48 Cutting Time: 7.494 Basic machine dimensions / weight Length mm: 5.330 Width mm: 4.100 Height mm: 2.395 Weight kg: 8.360

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 90 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - C axis indexing precision : 0.001 [°] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/-50 [mm] - Tool type : BMT - Live tools speed : 10000 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 41 [kW] MACHINE HOURS - Number of hours under power : 21392.8 [h] - Number of working hours : 13797 [h] EQUIPMENT - CNC : CELOS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : MAPPS V - 3 colors status lamp - Coolant tank : KNOLL * with high-pressure pump : 70 [bars] * with paper filtering unit - Tailstock option with counterspindle - Chips conveyor - Tool probe - Parts catcher Kdjdjx H Atyopfx An Uol - Parts conveying strip - Bar loader : LNS QUICKLOAD - Electric transformer - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Collet chuck

Condition: like new (used), Year of construction: 2023, operating hours: 2,763 h, functionality: fully functional, machine/vehicle number: 346574, turning length: 500 mm, turning diameter: 276 mm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, bar diameter (max.): 80 mm, Equipment: rotational speed infinitely variable, The machine was commissioned in February 2024 and has 1,778 automatic hours. It has only been used for machining plastics and brass. The subspindle is equipped with a two-jaw chuck for holding workpieces for milling contours. The machine can be inspected under production conditions at any time. It is in like-new condition. Total investment including accessories: €241,000. Equipped with a 12-station turret, all driven. Sale EXW 91413 Neustadt, Germany. Kodpfxoynnhwj An Usdl