DMG DECKEL MAHO 1035V

DMG DECKEL MAHO 1035V

Condition: excellent (used), Year of construction: 2011, Heidenhain TNC 620 control system Travel X/Y/Z: 1035/560/510 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Through-spindle cooling: 12 bar Njdj Admbqopfx Akiolh Chip conveyor

Condition: used, Technical details: turning diameter over bed: 1200 mm turning diameter over support: 800 mm turning length: 3200 mm length of gap: 600 mm center height measured in bed: 600 mm turning dia. in gap: 600 mm spindle turning speed - continuous: 4,6-545 / 22 steps U/min spindle passage: 90 mm feed: 1,4-510 m/min taper: MK6 total power requirement: 15 kW Nljdszuyfaopfx Akish weight of the machine ca.: 10,0 t dimensions L x W x H: 6,20x2,00x1,80 m dimensions electric cabinet LxWxH: 0,55x0,33x1,0 m equipped with: face chuck diameter 1000m (4 jaw chuck) fourfold chisel taper steady rest closed, inside diameter 250mm revolving tail center conical turning device *

Condition: used, Year of construction: 2006, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 15425021604, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,700 mm, total length: 2,800 mm, total width: 2,800 mm, table length: 1,200 mm, rotational speed (min.): 12,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 16,075 h, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: DC, Equipment: documentation/manual, Vertical machining center DMG Deckel Maho DMC 1035 V, year of manufacture 2006. Machine has only processed plastics – in good condition! Year of manufacture: 2006 Machine number: 15425021604 Condition: Good Delivery terms: Free on board (FOB) Location: 97944 Boxberg, Germany Payment terms: Prepayment – by bank transfer Internal No.: 180-1 Can be inspected while powered on: Yes Nodpsz I Dl Isfx Akiolh Technical data: - Operating hours (machine running): approx. 39,447 h (will increase slightly) - Spindle hours: 16,075 h (will increase slightly) - Tool holder: SK40 - Max. spindle speed: 12,000 rpm - Tool magazine: 30 positions - Table dimensions: 1200 x 560 mm - Control system: Heidenhain iTNC 530 - Travels X / Y / Z: 1035 / 560 / 510 mm - 400 V / 50 Hz / 35 kVA Scope of delivery: - Manuals and documentation - Wireless measuring probe Heidenhain TS640 - Handwheel - Programmable 4th axis Lehmann - Clamping angle - Manual dividing head - Swiveling vice Note: The vices on the machine table and the tool holders in the magazine are not included in the scope of delivery! Dimensions & weights: - Installation dimensions L x W x H approx.: 2800 x 2800 x 2700 mm - Weight approx.: 5000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ► On request, we can offer transport to the desired location. ► The quoted price is net, plus VAT. ► The goods are sold with the exclusion of any warranty. ► Technical data subject to change without notice. ► Subject to prior sale. ❗The sale of the goods is exclusively to business customers!❗

Condition: used, Year of construction: 2007, x-travel 1350 mm y-travel 560 mm z-travel 510 mm Control Heidenhain iTNC 530 total power requirement 13 kW weight of the machine ca. 5 t Nlodpfx Aszlb Dfokijh

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Height: 3409mm Weight: 34000kg Nljdpfxjztctqo Akieh Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Nedpfez An S Rsx Akiolh Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Condition: used, Year of construction: 2015, x-travel 1140 mm y-travel 710 mm z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 8.000 U/min feed stepless max. 10.000 mm/min rapid traverse 24/24/24 m/min tool change unit 30 Pos. coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW voltage 400 V total power requirement 25 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m Nljdpfx Asxx A Ewskijh band filter unit 2,00 x 1,00 x 1,30 m coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis!

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 950 mm, controller manufacturer: HEIDENHAIN, controller model: TNC640, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 95 Monoblock was manufactured in 2016. It features a tool capacity of 60 tools and is equipped with a Heidenhain TNC640 control unit. The machine includes an internal coolant supply of 40 bar and a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 95 Monoblock vertical machining centre we have for sale. Contact us for further details. - Internal Coolant Supply (IKZ): 40 bar- Tool Measurement: Blum laser tool measurement- Optional Equipment: FCS clamping system (optionally included / available for additional purchase)- Operational Status: Fully functional, currently still in full operation- Machine Condition: Good; air/sight glass on the front is defective; runs very smoothly and with high accuracyThe displayed image of the machine is AI generated. Technical Specification Taper Size HSK 63 Nlsdpfx Akez S E Eljish

Condition: good (used), Year of construction: 2023, functionality: fully functional, DMG Mori M2 Pro, Year of manufacture 2023 / Commissioned in 2024, Siemens Sinumerik ONE control system, Travel range X/Y/Z 1100/550/510 mm, Table size 1400 x 600 mm, 24-position tool changer, Linear axis speeds X/Y/Z 24 m/min, Tool holder SK 40, Spindle speed up to 12,000 rpm, Chip conveyor, Renishaw probing system kit, Coolant spray gun, Enclosure roof, Internal high-pressure cooling 20 bar, Bed flushing via M-function, Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator Ø 150 mm, 4th axis package, LEHMANN rotary table EA-520.L, with automatic spindle clamping, Center height: 180 mm, Compact and stable tailstock with large roller bearing, Prepared for automatic clamping, Permissible hydraulic pressure max. 220 bar, Nledpfxjza Apaj Akieh Steel clamping bridge L/W 600/270 mm, Base plate steel, Tropical package, Active cooling unit for control cabinet, Blow-off air externally and internally (through spindle center) can be activated via M-function, External electronic handwheel, Software option - DXF import, Machine with 2100 spindle hours.

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Nlsdpfxeu Iddns Akijh Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *