Free bundle transport

Diverse

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Gkodpfx Ajztpxmeg Tea

Condition: used, Year of construction: 2020, The sausage production line consisting of two modern machines, VEMAG HP20E and VEMAG FSL210, is an efficient solution for meat processing plants looking for reliable equipment to automate the sausage filling and forming process. Both machines, manufactured by the renowned VEMAG Maschinenbau GmbH, guarantee high quality, durability, and precision. VEMAG HP20E vacuum filler The VEMAG HP20E vacuum filler ensures even portioning of stuffing with different consistencies. With 23 kW of power and an efficient vacuum system, the machine works reliably even during intensive production. VEMAG HP20E specifications: Year: 2015 Power: 23 kW Power supply: 3x400V, 50/60 Hz Capacity: up to 6,300 kg/h Portion weight: 1-99,000 g Air consumption: 40 l/min Air pressure: 5-6 bar Construction: stainless steel VEMAG FSL210 – sausage line with grinding head The VEMAG FSL210 is an automatic sausage production system that enables precise filling, portioning, and linking of casings. The device guarantees high performance and consistent quality of finished products, while remaining easy to operate and quick to clean. VEMAG FSL210 specifications: Year of manufacture: 2015 Power: 7 kW Portioning capacity: 800 portions/min, depending on the casing, caliber, and weight Portion length: From 55 mm – no restrictions, single cut / From 40 mm – no restrictions, for 2 or more sausages Power supply: 3x400V, 50/60 Hz Weight: 548 kg Capacity: up to several thousand pieces/hour Construction: stainless steel Advantages of the VEMAG HP20E + FSL210 line: High production capacity for both fresh and cooked sausages Precise portioning and linking of casings Easy operation and simple maintenance Robust and hygienic stainless steel construction Gjdpfx Agexpgtgs Tska Ideal solution for medium and large meat processing plants This line allows for the automation of the sausage production process, minimizing raw material losses and guaranteeing consistent product quality.

Condition: used, lot (ca. 25 Stück) verschiedener cutters und Fräskombinationen vorwiegend für MEC Vorschub oder ohne Markierung. Technical data: Gedpfx Ajzryn Aeg Tska - Markierung: Ohne oder MEC - Bore: 40 mm - Weight: ~100 kg

Condition: used, Lot of 10 Used Industrial Pumps – Various Brands & Sizes We offer a complete lot of 10 used industrial centrifugal pumps, available from our warehouse in Rotterdam, The Netherlands. The lot consists of various pump configurations and sizes, including several pumps with stainless steel pump housings, large flange connections, and heavy-duty electric motors. The pumps come from an industrial environment and are offered as one complete lot. Lot details: Quantity: 10 pumps Condition: Used Various sizes and capacities Various electric motor sizes Several stainless steel pump housings Flanged inlet/outlet connections Complete pump/motor assemblies mounted on base frames Suitable for industrial applications The pumps have not been individually tested by us and are therefore offered in their current condition. Location: Rotterdam, The Netherlands Gksdpfx Ajztraasg Toa Delivery: Ex Works Rotterdam, loaded onto buyer’s truck Payment: 100% payment in advance Terms of sale: The complete lot is sold “as is, where is”, without warranty or guarantee. No claims or returns will be accepted. Additional photographs and individual pump/nameplate information can be provided upon request. Preferably sold as one complete lot.

Condition: good (used), Parts shown by hand not come. VEMAG HP30E,2011. Gkodpozn U Nyjfx Ag Tea MULTIVAC R535, 2009.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Complete container system consisting of 24 units (20ft), manufactured in 2023 and in very good, well-maintained condition. The system was purchased in 2023 and is ideally suited for construction sites, accommodation, office, or social spaces. Composition of the 24 containers: • 1 × sanitary container • 1 × utility container with 2 showers and 2 partitions • 7 × living double containers (total of 14 units) each with its own wet room • 10 × office containers, most recently used as an open-plan office Gksdpfx Ajza Ahvjg Tea Dimensions per container: 6,063 × 2,450 mm, interior height 2,500 mm. Location: Bad Dietzenbach. Collection or transport from the location. We will gladly provide you with further photos and detailed information – a sale in smaller quantities is also possible upon request. Technical data: Number of containers: 24 units (20ft) Sanitary container: 1 unit Utility container: 1 unit (2 showers, 2 partitions) Living containers: 7 double containers (14 units) with wet room Office containers: 10 units (most recently used as an open-plan office) External dimensions (per container): 6,063 × 2,450 mm Interior height: 2,500 mm Year of manufacture: 2023 Condition: very well maintained Location: Bad Dietzenbach

Condition: good (used), Various suction manifolds, suction distributors Godpfx Aetp Hpbeg Tska Only suction bell C is currently available; details can be found in the photos. Suction bell C: 140 euros The parts can be viewed on-site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse; see "other offers from this seller."

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R14101358 (Roboter) / E14130752 (Steuerschrank), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, Reach: 2,655 mm, Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Control cabinet: FANUC R-30iB. Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Gsdstk N E Topfx Ag Tjka Packaging and loading included.

Condition: used, Containers (stackable containers) – steel sheet Assortment of storage containers – stock containers – metal storage boxes – transparent storage boxes, Schäfer boxes, used. Various designs (painted, galvanized, closed, perforated, with handle recess) and various sizes / stackable. Dimensions: 30 x 50 x 20 cm + 37 x 37 x 11 cm Total number of pieces: 56 The stackable boxes are available for €180.00 net ex works, plus packaging costs. Ideal for transport and storage. All technical specifications are subject to typographical errors and errors. We only sell to countries within the European Union. Gkjdpfx Asg U Am Tog Tsa

Condition: good (used), Our Services: Gkjdpfxs Swr Eo Ag Tea - Repair factory for transformers to 63 MVA / 110 kV - New transformers Oil / cast resin - Newly reconditioned warehouse transformers / - Rental of transformers and stations - 24 h emergency service - Recycling / Disposal of Transformers - Accessories for transformers - Training / Expertise - Conversion of Oeltrafos on environmentally compatible Esterfilled - Certification: ISO 9001, OHSAS

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Fully automatic high-performance die cutter Renz Kugler 341-2R for calendars and ring binders 3 tools Conveniently operated by a single person, Kugler punching machines are suitable for use in even the tightest spaces. Equipped with a non-stop feeder and gentle top-fed material intake. Capable of trouble-free processing of mixed materials (e.g., cardboard and plastic). Precise alignment before the punching process ensures maximum accuracy. Ideal for perforating ring binder inserts, cardboard and plastic calendar/index sheets, paper for wire-bound products, and much more. Tool changes only require a few simple steps. After punching, a turning wheel maintains the correct sequence for printed and numbered products, transporting them to the delivery station. Precise and simple register adjustment. Performance features - Minimal maintenance required - Highly efficient - User-friendly operation - Fastest changeover between formats Technical data - Working width: 500 mm - Maximum punched page format: 500 mm - Maximum unpunched page format: 500 mm - Maximum punching thickness: 3 mm per layer - Punching speed: 110 cycles/min - Paper feeding: automatic, non-stop paternoster feeder - Paper delivery: automatic, box delivery with jogger - Paper grammage: min. 60 g/m², max. 2 mm (subject to gram/quality restrictions) - Register punching: yes (not included) - Interchangeable tooling - Tool changes require only a few manual operations - Quick format change, manual setting wheels - Adjustable edge distance - Punching unit can be selectively deactivated Godpfx Ajxduclsg Toka - Space required: 3.30 x 1.50 m - Net weight: 1,580 kg

Condition: used, Reusable bottle line for filling beverages into 0.5 l and 0.33 l glass bottles. The filling line comprises the following components: - Uncorker (Rink, 1995) with 2 uncorking heads - Unpacker (Albert Frey) with 2 unpacking heads - Crate washer (Göbel, 1971) for cleaning using spray nozzles - Bottle washing machine (GM Gera, 2007), single-end machine - Empty bottle inspector (Krones, 2016) for checking the base, side walls, neck and residual liquid - Glass bottle filler and capper (Krones), short-tube counter-pressure filler with 40 filling valves and capper for crown caps - Labelling machine (Krones, 1995) for wet glue labelling - Date coding (Domino, approx. 2010 – 2017), inkjet printer - Fill level, label and cap inspector (Syscona, 1997 – 2008) - Packer (Albert Frey, 2002) with two packing heads - Palletising system (ABB, 2014) with articulated arm robot - Conveyor belt systems for bottles and crates Additional title: Reusable bottles; manufactured between approx. 1971 and 2016 Nominal capacity appr.: 12000 Fl/h Gkedszhl Hpopfx Ag Tja Formats: 0.5 l Euro and NRW, 0.33 l Giesinger; crown caps Features: Uncorker; Unpacker; Crate washer; Bottle washing machine; Empty bottle inspector; Filler and capper; Labelling machine; Date coding; Fill level/label/cap inspector; Packer; Palletising system

Condition: used, Bolts, hex bolts, flange nuts, hex nuts, collar nuts, washers, washers Gkodeirnwxepfx Ag Tja -Washers: Washers, various sizes 276 kg -Sizes/number: Ø10.5 to Ø31.5 mm see photo parts list -Price: complete -Total weight: 276 kg

Year of construction: 2016, condition: excellent (used), Polish machine built to a high standard, full touchscreen controls. 4 lane linear pot filling and sealing line. Has been filling foil pots of pate. Perfect for pate, animal foods, meat paste etc. In nearly new condition. Gksdpsht Hllefx Ag Tsa

Condition: good (used), Edge banding, edge trimming. Veneer roll -Edge tape: edge banding approx. 62 rolls Gksdpfewk D Rbex Ag Tea -Type: various designs, see photos -Price/Sale: complete -Dimensions: 1120/630/H900 mm -Weight: 277 kg