Cup grinding machine

Delta LF-350

Condition: used, Cup Surface Grinding Machine / Cylinder Head Grinding Machine Max. grinding area approx. 550 x 250 mm Electromagnetic clamping plate 500 x 200 mm Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Duodowlbz Topfx Afnon Machine weight: 1000 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Cup wheel - diameter: 175 mm Spindle projection: 180 mm Djdpfec Skfbsx Afnjun Operating voltage: 400 V Machine weight approx.: 300 kg Space requirement approx.: 0.90 x 0.60 x 1,80 m

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Dujdpfx Afow I A Uxjnsn Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Dodpfx Afouqackoneun

Condition: excellent (used), IMM 72780 Double-sided polishing machine Mint condition, the machine has hardly been used. TECHNICAL DATA Polishing wheel: 100 - 500 mm shafts: 35 mm Dodpfxeu Hanyo Afnoun Spindle speed: 1500 rpm Voltage: 400 V, 50 Hz Weight of basic machine: Approx. 400 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Stehle S820 (automatic straight knife grinder). Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification: • Maximum tool width 330 mm • Tool diameter planer heads (min-max knife heads) 120 - 230 mm • Grinding wheel speed 2850 / 5750 rpm • Possible to grind from 2 to 12 knives per head with index plate • Index plates included for 4,6,8,10 and 12 knife grinding. • Grinding wheel drive 1,3 kW • Clearance angle 10 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Dodpsq Dzkuefx Afnsun

Condition: excellent (used), Year of construction: 1986, Engine lathe, manufacturer VDF HEIDENREICH & HARBECK, type 540 Hamburg, year 1986. In very good original condition, equipped with a 3-axis digital readout Heidenhain POSITIP 880. Feed and rapid traverse on all 3 axes, including the top slide. Comes with coolant system, rear chip guard, and machine documentation. Chuck: 315 mm Forkardt Turning diameter: 540 mm Turning length: 1500 mm Spindle bore: 103 mm Spindle speeds: 9–1800 rpm Tool holder: Multifix C Chip protection cover For further details, see technical data sheet. Space requirement: length 3.8 m, width 2 m (with rear wall), height 2 m (with rear wall), weight approx. 3500 kg. Djdpfx Asx Hr Duefnjun

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Dusdefifa Aspfx Afnjn Freight costs on request

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need. Dsdpfxet Hwupj Afnsun

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3806, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 250 mm, grinding spindle speed: 3,000 rpm, power: 3.5 kW (4.76 HP), Equipment: rotational speed infinitely variable, JUNG JF520 - workshop overhauled Mechanically and electrically inspected and function tested by our JUNG specialists Wear parts replaced Geometry overhauled according to the JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor feed - 3-axis HEIDENHAIN digital readout - Dressing compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck - Used paper band filter Duedpfowz Hf Nex Afnen 6 weeks parts warranty Delivery time: short notice We are happy to accept your used JUNG grinding machine in part exchange.