Tool milling machine

DECKEL FP1

Condition: used, Year of construction: 1985, machine/vehicle number: 294, x-travel:400 mm y-travel:190 mm z-travel:310 mm table clamping surface:280 x 750 mm Reach of the vertical spindle:115-575 mm Gjdpfxsvcf Hpo Ahvjbw feed steps:16 feed range:11,2-355 mm/min tool taper:SK 40 speed steps :16 speeds::56-1800 min-1 total power requirement:2,2 kW dimensions of the machine ca.:1550 x 1250 x 2000 mm weight of the machine ca.:1200 kg

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Gbsdpfjucphxex Ahvsw Year of construction unknown

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm table load max. 200 kg tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min Gbodpfx Ahjxl Tcgjvew spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a research centre. Equipment: 3-axis active digital readout made by Heidenhain TNC 113 Fixed angle table Coolant equipment Kelch mounting block Machine vise Counterholding device for the horizontal spindle

Condition: good (used), Internal item no.: 25029 Universal milling machine Deckel FP1 3-axis active digital readout (Heidenhain TNC113) Year of manufacture: 1987 Spindle taper: SK40 (S20x2) Travel: X 300 / Y 160 / Z 340 mm Speed: 40 - 2000 rpm (2 gearbox ranges) Infinitely variable feed. The machine is in a well-maintained condition and can be inspected under power on site. Including extensive accessories: - Operating manual / Electrical diagram / Spare parts list - Deckel drawer cabinet Gsdpowvgcdefx Ahvebw - SK40 tool holders (S20x2) - Counter-support - Coolant pump

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, USED Taiwan Takisawa model EX-108 high performance 2-Axis CNC lathe. Serial Number CA11E80453 Year 2000. NOTE THIS IS A 2 AXIS MODEL EX108 NOT A 3 AXIS EX308. • Heavy Cast Iron Slant Bed Construction Gjdpfxst E Hvge Ahvebw • Fanuc 21iT CNC Control • 4-Track Heavy Duty Linear Guideways • High Speed Servo Turret • Tool Setting Device • 8” 3-Jaw Hollow Spindle Hydraulic Chuck • Parts Counter • Toolholders included Max. Swing Over Bed - 400 MM Max. Swing Over Cross Slide - 320 MM Distance Between Centres - 645 MM Standard Turning Diameter - 216 MM Max. Turning Diameter - 320 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X-Axis Stroke - 180 MM Z-Axis Stroke - 530 MM Spindle Speeds - 60 – 4000 RPM Spindle Nose - A2 – 6 Spindle Bore - 63 MM Turret Type - 12 Station Tailstock Stroke - 435 MM Tailstock Quill Stroke - 100 MM Tailstock Quill Taper - 5 MT Rapid Traverse (X & Z) - 20 & 24 M/Min Jog Feed Rate (X & Z) - 0 – 1260 MM/Min Spindle Motor - 7.5 / 11 KW Electrics - 415V,3PH,50HZ Floor Space - 2240 MM X 1645MM Machine Weight - 4300 KGS

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Gbedpfjw Agxrjx Ahvjw Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed very good CONDITION Technical data: >> Year of construction 1990 Machine no. 2102-5046 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 Gbjdpfx Aeu Um Erjhvjw >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan Gojs3G About the machine : Universal milling machine Deckel FP1 built in 1990 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 2003, Available directly from the tool shop Vertical machining center Gbedot I Di Ajpfx Ahvsw Make: DMG Model. DMC 104 V Linear Year of manufacture 2003 CNC Siemens 810 D Powerline Spindle hours 18,200 (July 2024) Table area 1,250 x 600 mm X-axis travel 1,000 mm Y-axis travel 600 mm Z-axis travel 500 mm Tool holder SK 40 Spindle speeds 1 - 12,000 rpm Drive 13/19 kW at 100/40% duty cycle 30-station tool changer Equipment: Linear drive on the X-axis Bed flushing system Spiral chip conveyor Direct position measuring system Drill breakage detection via laser Temperature compensation of the Z-axis via temperature sensor including active cooling unit Internal coolant supply through the spindle External air blown through 2 Pipes 700-liter coolant system, paper belt filter system with 40 bar high-pressure system Visiport viewing window on the operator door Additional machine door on the left side Bader cooling unit on the control cabinet Prepared for connecting a 4th axis with a Siemens 1FT 6064.1AF71-4AG1 drive motor and an indirect measuring system with 0.5 bar sealing air

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 Gsdpfstwlwzex Ahvebw >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3 - axis digital readout Heidenhain original condition !!! Technical data: >> Machine no. 56560/08 Year of construction approx. 1975 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1,5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 Gedpfx Aheu Nvxmevobw >> S20x2 tightening system >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant device About the machine : We offer a universal milling machine Deckel FP1 in very good original condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out the lids on site under power.

Condition: used, Year of construction: 2007, number of spindle speeds 6.000 U/min tool taper BT50 numbers of positions in the tool changer 121 control FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: Godpfx Ahet I Ec Djvsbw + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display K&C infinitely variable feed in light gray Super condition Technical data: >> Year of construction 1978 Machine no. 2101-0465 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed stepless 2 axes Godst Aav Ijpfx Ahvjbw >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital indicator K&C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The machine has very little crank play and all spindles can be moved easily. The bellows are all new. On this newer FP1 model, the feed is infinitely variable in two axes and the machine also has a rapid traverse. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2867 >> Turn-tilt-swivel table (newly planed) >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Gbjdpfet Aarpsx Ahvow Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1985 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, table length: 1,800 mm, table width: 2,000 mm, feed length W-axis: 700 mm, workpiece weight (max.): 12,000 kg, milling spindle length: 700 mm, FPT CASTEL RED HEIDENHEIN TNC 430. Built in 2007. X=3100mm Y=2000mm Z=1000mm Table 2000 x 1800 mm, 12 Ton Cooling through spindle. X Column travel 3,100 mm Y Headstock vertical travel 2,000 mm Z spindle stroke 700 mm W Column in spindle direction 1,000 mm Spindle diameter 130 mm Spindle diameter ISO 50 Spindle speed 3000 rpm Spindle motor 37 kW Gbedpfowdiu Esx Ahvjw Rotary table size 1,800 x 2,000 mm Table load 12 tons C-axes 360,000°

Condition: like new (used), Year of construction: 2011, functionality: fully functional, Universal Milling Machine Deckel FP1 repowered by FPS in year of manufacture 2010 with 3-axis digital display Heidenhain ND 780. Like new!! Technical Data: >> Machine no. 2101-51084 Year of manufacture 2011 >> Fixed angle table >> Speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 KW >> Travel range X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic vise >> Collets >> Tool holders >> Milling cutters Godpfx Ajwpi Dqshvobw >> Operating manual >> Coolant device About the machine: A universal milling machine Deckel FP1 repowered by FPS is being offered in like-new condition. The accessories include a hydraulic vise with rotary table, collet tool holder, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to inspect and try out the Deckel on-site under power. The machine is immediately available.