Tool room milling machine

DECKEL FP 1

Condition: good (used), functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Gedpfoztynfjx Ahmsbr Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm Gsdpfxotzf N Ro Ahmjbr -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min Gbsdpfxjzr Hrzj Ahmor feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Deckel FP1 milling machine with Heidenhain digital control in very good condition. Technical specifications: * Speed: 40 - 2000 rpm * Feed rate, continuously variable in 3 axes * Rapid traverse in 3 axes * Spindle brake * Table travel X/Y/Z: 300/160/340 mm * Vertical quill * Clamping system SK40/M16 * Weight approx. 800 kg Accessories and equipment: Gbedpfx Aozr Hdwjhmsr 3-axis Heidenhain digital read-out Coolant system Operating manual, spare parts list

Condition: new, Technical specifications: Drilling capacity in steel: 40 mm Tapping capacity: M 20 Spindle: MT 3 Thrust: 260 mm Speeds: (12) 55 - 2520 rpm Quill stroke: 130 mm Table size: 585 x 190 mm X travel: 380 mm Y travel: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Weight, approx.: 300 kg Gbedpfxswhd Afj Ahmor Equipment: - Cross table - Thread tightening spindle - Thread cutting device - Rotatable table - Height-adjustable protective cover - Spindle guard with limit switch

Condition: good (used), Deckel FP1 milling machine, made in Germany by Friedrich Deckel AG, Munich. The machine is operational and in working condition. For more information, please contact us. Gbjdsw Amaijpfx Ahmor

Condition: good (used), Year of construction: 1989, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine comes from a training center. Equipment: 3-axis active digital readout made by Heidenhain Gbjdpfx Ahezrt Rkemsr Fixed angle table Coolant equipment

Condition: good (used), Qty 2 Linx Ink Jet Coders Models 7900 & 7300 In good working condition Gbedskyumkspfx Ahmer Fully serviced In working condition

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display, Heidenhain active control, and continuously variable feed. Technical data: >> Year of manufacture: 1982, Machine no. 2101-1995 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Continuously variable feed in 2 axes >> Rapid traverse in 2 axes Gedpfszrn Tyox Ahmsbr >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head, adjustable by 100mm on the spindle head >> Vertical quill and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Operating manual, parts list About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs smoothly. The FP1 was in a training workshop at a university and was used very little. This newer FP1 model has continuously variable feed in two axes, and the machine also has rapid traverse in these axes. A major advantage is the active 2-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically approach. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2102-2821, Offer 26207 Technical data: - Machine originates from the Weser Ems vocational training center and underwent a complete overhaul at - FPS Werkzeugmaschinen GmbH in Warngau in 2015-2016. - Table size 600 x 220 mm Gedpfxozrfifo Ahmjbr - Working range of the axes: - X (longitudinal) 300 mm - Y (transverse) 340 mm - Z (vertical) 150 mm - Distance between table axis and stand 655 mm - Tool holder ISA 40 - 16 working spindle speeds 40 - 2000 rpm - Feed rates X - Y - Z axes 10 - 500 mm/min - Rapid traverse 1200 mm/min - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 650 x H 1600 x D 1000 mm - Weight approx. 600 kg - Including: - Positioning control with Active digital display - Adjustable vertical milling head with drilling spindle - Central lubrication system - Fixed angular table - Collet set, various holders + milling cutters - Rotary table - Drawer cabinet with drawers on roller bearings

Condition: excellent (used), Year of construction: 2008, MESPACK type H-180-FE powdered sugar bagging machine Year 2008 Filling in 2 stages 1 filler fills half, 2 filler fills other half Capacity: 50 bags per minute. Cartoning machine OTOR SYSTEMS type FCR 214 Capacity: 5 cartons of 10 bags per minute Year 2011 Gbjdpotn Rarsfx Ahmor

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Gbedpfxor U St Uj Ahmjr Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: used, Univ. universal tool milling machine DECKEL, type FP 1 Machine no. 52185, year of manufacture 1968 Travel distances: X: 300 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 250 mm Spindle mount: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-shifting Power connection: 380 volts, 50 Hz - Feed in the X and Z axes - Two motor speeds and 8 gear stages - Quill travel on the vertical milling head: 60 mm - Fixed tilting table - Coolant system in the machine base - Adjacent control cabinet - Counter holder with counter bearing for horizontal milling, SK 40 Space requirement L x W x H: 1200 x 1100 x 1600 mm Gbodjdzqb Sspfx Ahmor Weight: approx. 1000 kg Very good condition

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Gsdjh Akm Tepfx Ahmsbr

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 28317, Year of manufacture approx. 1960 Travel distances: X: 245 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 210 mm Spindle mount, horizontal: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 0.8 and 1.1 kW, pole-changing Power connection: 380 Volt, 50 Hz Gsdpfeiy Ekvjx Ahmsbr - Spindle speed controlled via 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant system with mechanical pump in the machine base - Quill travel on the vertical milling head: 60 mm - Vertical milling head swivels +/- 90° - Metal substructure made of angle iron with machine feet Space requirement L x W x H: 1100 x 900 x 1650 mm Weight: 650 kg Good condition