Liquid separator filter dryer

Danfoss DX 033

Condition: excellent (used), Year of construction: 2024, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 2MAM022829, cooling capacity: 1,000 kW (1,359.62 HP), Cooling Capacity: 959 kW Type of Input Current: 3 Phase / 50 Hz / 400 V Type of Cooling: Air-cooled Overall Weight: 7,973 kg (Operating) / 7,597 kg (Rigging) Bjdpfx Asimz Uasbbsdk Ambient Temperature (max.): 35°C Ambient Temperature (min.): 12.8°C (based on part load performance) Compressor Type: Screw, semi-hermetic, VSD controlled Total Power Consumption: 309.9 kW Noise Level: 74 dB(A) 10 m Refrigerant Type: R134a, total charge: 242 kg Water Flow Rate: 146.7 m³/h (40.76 L/s) Pressure Drop (Evaporator): 52.2 – 64.1 kPa COP (Full Load): 3.09 IPLV (Part Load): 5.12 Number of Fans: 14 units (7+7), with low sound kit Nameplate Available: Year of Manufacture: 2018

Condition: like new (used), Year of construction: 2015, operating hours: 13,000 h, machine/vehicle number: EWADC22C-XS003, cooling capacity: 2,000 kW (2,719.24 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 46 °C, ambient temperature (min.): 35 °C, TECHNICAL SPECIFICATIONS Brand: DAIKIN Model: EWADC22C-XS003 Cooling Performance Cooling Capacity: 1933 kW Cooling Capacity (Kcal/h): 1,720,000 Kcal/h Energy Efficiency Ratio (EER): 2.63 Seasonal Energy Efficiency Ratio (ESEER): 4.02 IPLV (Integrated Part Load Value): 4.47 Evaporator Type: Shell & Tube (Direct expansion) Max. Water Side Operating Pressure: 10 bar Water Volume: 850 liters Nominal Water Flow: 92.2 l/s Water Inlet/Outlet Temperature: 12.0°C / 7.0°C Connection Diameter: 273 mm Insulation Material: Closed cell Condenser Type: Aluminum finned, internally grooved copper tubes Fan Type: Propeller type, glass fiber reinforced resin Fan Diameter: 800 mm Number of Fans: 30 Fan Motor Power: 52.5 kW Fan Speed: 900 rpm Nominal Air Flow: 160,327 l/s Compressor Type: Asymmetric single screw, semi-hermetic Model: 3 x HSA2690524 Quantity: 3 Oil Charge: 75 liters Control Mode: Stepless modulation (25% – 100%) Start Method: Star-Delta (Y-Δ) Refrigerant Bdedpeuma Thsfx Abbek Type: R-134a Charge Amount: 360 kg Number of Circuits: 3 Dimensions and Weight Width: 2,285 mm Length: 14,785 mm Height: 2,540 mm Unit Weight: 12,600 kg Operating Weight: 13,470 kg Electrical Specifications Voltage: 400V / 3 Phase / 50 Hz Voltage Tolerance: 10% Nominal Running Current: 1100 A Max Starting Current: 1486 A Max Current for Wire Sizing: 1608 A Control and Automation Control Panel: MicroTech III Remote Monitoring: Modbus RTU, BACnet/IP, LonWorks, TCP/IP Temperature Regulation Accuracy: 0.1 °C Advanced Protection: High/low pressure, oil pressure, motor temperature, freeze protection, phase monitoring Sound Level Sound Power: 104 dB(A) Sound Pressure: 81 dB(A) 1 meter distance

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale Bdsdpfx Abetltl Hebjk This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Model: TRUMATIC 500R Type: CNC Punching Machine Control: Bosch CC220 Punching force (ton)22 Capable of taking multi tool Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1999

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Bjdpem Ncayjfx Abbsdk Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: type plate available, Two professionally disassembled compressors from the manufacturer GEA Bock. Technical data sheet available, see images. Bdsdpewuvqusfx Abbok

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, operating hours: 76,500 h, machine/vehicle number: 080430, laser power: 3,200 W, punching force: 22 t, punching diameter: 64 mm, type of input current: three-phase, working range: 1,250 mm, Equipment: cooling unit, documentation/manual, safety light barrier, machine in very good condition, fully functional and reliable. currently dismantled and prepared for immediate removal. I can provide videos of operation. help with assembly. Bodpfx Abswwumyebedk

Condition: new, sheet width 1290 mm plate thickness 5 mm pre-bending ja roll diameter 120 mm roll speed 1 - 6 m/min total power requirement 1,1 kW weight of the machine ca. 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. Bedsvzhgpspfx Abbsdk We are distributor only for Germany. Machine dealer with own stock of 1600 m².

Year of construction: 2008, condition: used, York Screw compressor with flanged motor Cooling agent: R134A could be used for R717 Amonia Bsdpfx Abjcrqmrebedk motor data: 165KW/225HP at 3000rpm Y400V/50hz

Condition: used, Type: C280-35L Pressure: 280 T Bedpfx Ae Du Txjbbodk Working length: 5.300 mm Technical characteristics: HYDRAULIC New hydraulic and electric systems

Condition: good (used), Year of construction: 1999, sheet width 2040 mm plate thickness 3 mm daylight upper clamping 350 mm bending angle max. 0-135 ° Bdjdpjvgnm Hsfx Abbok adjustment of lower and bend clamping 80 mm control Fastimatic M200 power requirement 2,2/1,5 kW weight of the machine ca. 2460 kg dimensions of the machine ca. 3,2 x 2,8 x 2,1 m Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Inox less due to its greater strength. Little used machine, very good condition - original colour! Please notice that the price of a new CNC-machine in this dimension with back gauge is about 65000,--. Machine dealer with own stock of 1600 m².