Chiller

DAIKIN Air Cooled Chiller

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Prodperzq Arefx Akijc Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Year of construction: 2022, condition: as good as new (ex-display), Air handling unit with EC technology for hall climate control or heating, cooling capacity in conjunction with a chiller system of 150 kW at 7/12°C, heating capacity 300 kW, air flow rate 20,000 m³/h, 4 x 500 mm air outlets, compact design. Prodpfsfzrgyex Akioc

Condition: good (used), Item: D-1746-APV-Baker-N35-15m3 Exchanger APV BAKER PLATE EXCHANGER Stainless Steel Exchanger Pasteur with 2 section, Prodpfx Akeimmb Seisc Capacity 2 x 15 m3, working press 6 Bar, 47,9 m2, temperature 120 C,

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Pedpoy Iplfsfx Akijrc Very little use Ex Pharma Facility

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Predpoxlngajfx Akisc Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: like new (used), Year of construction: 2015, operating hours: 12,500 h, machine/vehicle number: EWADC22C-XS003, cooling capacity: 2,000 kW (2,719.24 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 46 °C, ambient temperature (min.): 35 °C, TECHNICAL SPECIFICATIONS Brand: DAIKIN Model: EWADC22C-XS003 Cooling Performance Cooling Capacity: 1933 kW Cooling Capacity (Kcal/h): 1,720,000 Kcal/h Energy Efficiency Ratio (EER): 2.63 Seasonal Energy Efficiency Ratio (ESEER): 4.02 IPLV (Integrated Part Load Value): 4.47 Evaporator Type: Shell & Tube (Direct expansion) Max. Water Side Operating Pressure: 10 bar Water Volume: 850 liters Nominal Water Flow: 92.2 l/s Water Inlet/Outlet Temperature: 12.0°C / 7.0°C Connection Diameter: 273 mm Insulation Material: Closed cell Condenser Type: Aluminum finned, internally grooved copper tubes Fan Type: Propeller type, glass fiber reinforced resin Fan Diameter: 800 mm Number of Fans: 30 Fan Motor Power: 52.5 kW Fan Speed: 900 rpm Nominal Air Flow: 160,327 l/s Compressor Type: Asymmetric single screw, semi-hermetic Model: 3 x HSA2690524 Quantity: 3 Oil Charge: 75 liters Control Mode: Stepless modulation (25% – 100%) Start Method: Star-Delta (Y-Δ) Refrigerant Type: R-134a Charge Amount: 360 kg Number of Circuits: 3 Dimensions and Weight Width: 2,285 mm Length: 14,785 mm Height: 2,540 mm Unit Weight: 12,600 kg Operating Weight: 13,470 kg Electrical Specifications Voltage: 400V / 3 Phase / 50 Hz Voltage Tolerance: 10% Nominal Running Current: 1100 A Max Starting Current: 1486 A Max Current for Wire Sizing: 1608 A Control and Automation Control Panel: MicroTech III Psdpfx Aouma Thskijrc Remote Monitoring: Modbus RTU, BACnet/IP, LonWorks, TCP/IP Temperature Regulation Accuracy: 0.1 °C Advanced Protection: High/low pressure, oil pressure, motor temperature, freeze protection, phase monitoring Sound Level Sound Power: 104 dB(A) Sound Pressure: 81 dB(A) 1 meter distance

Condition: as good as new (ex-display), Exterior dimensions: Dia Ø 3600 mm Total H 11000 mm. Pedpfeicgn Tjx Akijrc Cylinder height: 10.200 mm. Vertical stainless steel tanks - 2 pcs. Conical bottom with 4" outlet. Conical top with ventilation. Manhule at front of bottom. AISI 304. Can be delivered with 1-2 sidemounted agitators. Can be delivered with new isolation completed with optional plates.

Year of construction: 2021, condition: new, Aluminum inclined belt conveyor including subframe inclined section starting at 50mm (adjustable) discharge area 1500mm (adjustable) belt width 500mm (adjustable) We supply our belt conveyors in PVC, PU or rubber. PVC belt including cleats and wave edge Drive: 0.25kW motor (adjustable), speed 0.3m/sec Connection 220/240V, 50Hz, protection class IP54 Drive, etc., ready for connection, motor control optional 6 adjustable machine feet for alignment Wave edge: 40x35mm (adjustable) Pjdpshh Dbaefx Akierc T-20 cleats - 400mm pitch (adjustable) 2-ply, particularly resistant to transverse forces Our core competence lies in providing customers with exactly what they need. We work together with our customers to develop customized, individual solutions and supply corresponding equipment from our own production. Contact us by phone to find a suitable solution for your application. Belt conveyor, conveyor system, discharge conveyors, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal detection (metal-free), neodymium, overband magnet, magnetic belt separator.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6 Prjdpfx Akoud H Dmoijc  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW Psdpjinur Asfx Akierc