Automatic bar lathe

Citizen Cincom R04 VI

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N Ledpfeyffgrex An Usab • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Laodpfx Ajwm Rqaon Uob Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Lasdpoh Rdwxjfx An Ujb Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 Lasdpfjyyybhox An Uob 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 END ATTACHMENT - Number of positions : 7 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 7 [kW] Laodpfx Anexlum Ts Ueb WEIGHT & DIMENSIONS - Machine floor space : 2200 x 1200 [mm] - Machine height : 1700 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 34143 [h] - Number of working hours : 26657 [h] - Number of spindle hours : 15552 [h] EQUIPMENT - CNC : Fanuc 30i-model A - HFT (High Frequency Turning) - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Bar loader : FMB turbo 3-26 / 3200 A

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, empty load weight: 2,450 kg, Charmilles Robofil 240 Year of manufacture 2001 Travel distances (X / Y / Z): 350 x 220 x 220 mm Travel distances (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed of 300 mm²/min Best surface: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete system: 2020 x 2050 x 2000 mm Total weight of the system: 2450 kg Lajdpfjwqdrrsx An Uob The machine is cleaned, overhauled, and tested by us before delivery. We are happy to offer you the commissioning of the machine.

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Lasdpfx Anjrpn Dvo Uob Technical details shown on picture.

Condition: used, Year of construction: 1994, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm Laodpfxel Su Rxo An Ueb control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 11 - Number of motorized positions : 5 - Live tools speed : 5.000 [rpm] - Live tools power : 1,2 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 6,2 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.711 x 1.275 [mm] - Machine height : 1.705 [mm] MACHINE HOURS - Number of working hours : 18436 [h] - Number of spindle hours : 14949 [h] EQUIPMENT - CNC : Fanuc 32i-B - 3 colors status lamp - Rotating guide bush - Coolant tank Laodpfx Aoyxr Uqjn Ueb - Bar loader : FMB TURBO 3- 36 - Ejection of workpiece - Parts catcher - Parts conveying strip - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: good (used), Year of construction: 1998, operating hours: 28,500 h, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 5,000 rpm, VMC 300 Siemens 810D control SK40 12 tool positions Lajdpfxswlpb Us An Ujb In good condition Fully functional