CNC automatic lathe

citizen CINCOM L-20 VIII

Condition: excellent (used), Year of construction: 2008, operating hours: 9,000 h, functionality: fully functional, TECHNICAL DETAILS Control: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub-Spindle Fodpoxf Hqqsfx Afnspc Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools at Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tool System Turning tools (12x12x130): 5 Tool holder/parting-off blade (16x12x130): 1 Drilling tools (front): min. 3 Drilling tools (rear): 5 Tool holders, quills (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Collet main/sub-spindle: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specification Required space (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Power supply: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section), - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub-spindle - Main spindle with C-axis - Sub-spindle with C-axis - 3x powered tool rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 bar feeder - Option for long parts - Spindle flushing (Scherzinger pump)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 1,540 mm, turning diameter: 660 mm, Swing over crosslide: 660 mm Turning length: 1540 mm Spindle bore: 91 mm Spindle speed main/sub: 4000/5000 rpm Tool magazine: 76 positions Taper in milling spindle: Capto C6 Milling spindle speed: 12000 rpm Spindle motors: 26/22 kW Max power supply: 200V/255A Year of manufacture: 2013/9 Length: 5825 mm Width: 2850 mm Height: 2750 mm Weight: 15860 kg Fedpfx Aex A E U Njfnspc Full B-axis Coolant through milling spindle: 70 Bar Knoll 110/700 Part picker & outfeed belt Automatic presetter for lower turret & milling spindle Robot interface (no robot), automatic door & prepared for barfeeder Spindle 2 tailstock function Renishaw OMP60 probe MAPPS-IV CNC 5-axis simultaneous control 5 extra M-codes

Condition: excellent (used), Year of construction: 2010, 7 axes Control FANUC 18i-TB Max. bar diameter 16 mm (main spindle) Fjdpfx Aewnd Dpjfnepc Max. bar diameter 16 mm (sub spindle) Max. spindle stock travel 205 mm Max. spindle speed 10,000 rpm Tools 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear) 3 driven tools for cross machining on linear slide 4 tools incl. drill holders for rear machining

Condition: good (used), Year of construction: 2010, HURCO CNC Machining Center VMX 30 U with WinMax control Travel distances in mm: X-axis 1060 Y-axis 610 Z-axis 520 Integrated rotary and swivel axis: Coolant system Rinsing system to support chip removal Chip splash-guard enclosure Coolant spray gun Signal light for machine operating status Work area machine lamp Set of leveling pads Machine manual on CD includes: WinMax control 2 color screens (text + graphics) 2 software modules (1 x conversational programming at the machine + 1 x for ISO code programming via external programming device or CAD/CAM system through RS-232 C or V 24 interface) Fpedpexvtf Asfx Afnsc

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Fodowf Sfvspfx Afnepc Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. Fodoh U A I Ropfx Afnjpc -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors.

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm Fpodpfeww Nazox Afnsc no. of tools in turret 1 12 BMT 65 driven stations 12 BMT 65 speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Fpodpfewkd Efex Afnec Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Y-Axis: 1300 mm Additional equipment: various tools Recently installed new parts: Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Condition: used, Year of construction: 2019, Suitable for the additive manufacturing of high-precision 3D components using the SLM powder bed process. Materials: Tool steel, stainless steel, cobalt-chromium alloys, titanium, aluminum, precious metal alloys, and Inconel. Accessories: Total enclosure, rePLUG "Standard" powder unit for powder storage and powder feed, extraction of metal powders from the process chamber, and automatic sieving. CELOS for LASERTEC SLM Fire extinguishing system al-deco-STD - Extinguishing unit: 5-liter argon cylinder CELOS App II OPTOMET (Basic) software package for automatic prediction and optimization of process parameters for selected materials: Fpodpfx Afewhiycenec Max. travel X-axis: 325 mm Max. travel Y-axis: 325 mm Max. travel Z-axis: 400 mm Installation space size: 300 x 300 x 300 mm³ Layer thickness: 20 - 100 µm laser type: Ytterbium laser Laser power: max.: 400 W Focus diameter min: 35 µm tank volume: 50 dm³ Connected load approx.: 400 V / 50 Hz Weight approx: 1200 kg colour: Light grey, dark grey, red

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, A used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500, is for sale. Technical specifications: Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Fjdev Epigepfx Afnspc Extensive equipment as in the photos: 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x steady rest + various adapters