Sheet shears Cidan MS-R 20/4.0 2009

Cidan MS-R 20/4.0

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg Cpsdpfog Ip Efox Afnju dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Year of construction: 2012, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 4064 mm Y-AXIS TRAVEL: 2032 mm Z-AXIS TRAVEL: 70 mm WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1270 Kg SOURCE: FIBER 4000 ; 4000 W CONTROL UNIT: ByVISION WEIGHT: 15000 Kg OVERALL DIMENSIONS: 12900 x 6750 x 2500 mm ACCESSORIES: FUME EXHAUSTER Csdpfx Afevghbqsnopu NOTE: AUTOMATIC NOZZLE CHANGE

Year of construction: 2024, condition: new, Make: DURMA Type: MS 2504 year of manufacture: 2022 cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Jvcmke Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Cpsdpfx Afsd R Er Denju Ball screw Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Lower knife with 4 cutting edges CE marking Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our facility in Staufenberg. We will be happy to provide you with further information on request.

Condition: good (used), functionality: fully functional, working width: 3,100 mm, distance between stands: 2,550 mm, back gauge: 1,500 mm, pressing force: 110 t, Bending capacity: 110 Ton Bending length: 3.100 mm Distance between columns: 2.550 mm Back gauge: 1.500 mm Stroke length: 150 mm Throat: 250 mm Rapid approach speed: 100 mm/sec. Bending speed: 8 mm/sec. Return speed: 65 mm/sec. Controller: ESA Kvara S630 Touch Featured with: - Foot pedal - Various tool sets - Light screen security Merlino - Controls renewed in 2018 Cpsdpewi N T Ejfx Afnou Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 320 x 160 x 244 cm Machine weight: 8.700 kg

Condition: excellent (used), Year of construction: 2017, Cell with TIG-OTC-NH52-NEFC welding robotCountry of origin of the cell: Italy Year of manufacture: 2017 Country of origin of the robot: Japan Cpjdpfx Afsm Uyhhenou Brand: OTC NH5 Year of manufacture: 2016 Number of axes: 6 Reach: 866 mm Load capacity: 5 kg Control: OTC FD 11 Source: OTC DA 300-P Cell dimensions: Length 3500 mm 1900 width mm Height 2400 mm

Condition: used, Year of construction: 1991, sheet width 2050 mm plate thickness 3.5 mm Cpjdpow U U Uksfx Afnsu distance between columns 2100 mm stroke of upper beam 250 mm adjustment UW 80.0 mm work height max. 920 mm total power requirement 6.0 kW weight 2910 kg range L-W-H 3185 x 875 x 1450 mm Features: - Robust electric-driven folding machine - With dynamic, powerful drive motors - Manual/automatic operation selectable - Control panel, right front - Bending angle preselection via electric potentiometer - Manual lower beam adjustment - 1x used upper tool rail - 2x used lower tool rails - 1x freely movable double foot switch - Original operating instructions

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 285 h, load capacity: 3,500 kg, lifting height: 4,680 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,180 mm, fork length: 1,200 mm, empty load weight: 5,860 kg, total length: 2,530 mm, drive type: Elektro, construction width: 1,310 mm, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: As good as new Technical condition: Very good Front tires Type: Non Marking Front tires Size: 315/45-12 Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Size: 180/70-8 Rear tires Condition: 80 - 100% Codpfev I Hi Nox Afnspu Battery Volt: 80V Battery Ah: 775Ah Battery year of construction: 2023 Battery condition: 80 - 100% Sideshift, 3rd valve, 4th valve, Rear working lights, Front working lights, Heating, Full cab, Full free lift, Non-creeping tires,

Condition: new, sheet width 1290 mm plate thickness 5 mm pre-bending ja roll diameter 120 mm roll speed 1 - 6 m/min total power requirement 1,1 kW weight of the machine ca. 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: Csdpfxsvzhgpo Afnepu working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Capacity 2000 x 4 Cpedpfxouml R Eo Afnou Overall dimensions 3000 x 2000 Rear sheet support

Condition: used, functionality: fully functional, Year of construction: 2003, FLEXIbend RAS 73.30 - General technical data in mm: Bending length: 3200 mm Maximum sheet thickness (400 N/mm²): 3.0 mm Maximum upper beam stroke: 300 mm Backgauge system (U gauge): 10-1550 mm Optional extension: (-3050) Machine dimensions (largest possible option): 4360 x 5220 mm Basic machine weight: 4400 kg - Machine-specific data: Motorized operation; 400V, 50/60 Hz, 3-phase Year of manufacture: 2003 Condition: Refurbished – very good used condition Complete tool set, with specific max. sheet thickness 2-person operation from the front Second foot switch for operation from the rear (incl. light barrier for working from behind) Cpjdpfsx Hx Slex Afneu 15" CNC color graphic touchscreen control panel Touch&More CNC rear gauge and support system (10-1550) Backgauge system (standard): 10-1550 mm - Sample images -