Caterpillar 336 Sorting Bucket

Caterpillar 336 Sorting Bucket

Condition: new, Bunker conveyor suitable for the feeding of presses, shredding, etc.. Delivery throughout Europe possible. Iodjdxwlqopfx Aa Estr Technical data: POS. 1 feed hopper POS. Task 2, vol. 1, 5kW, conveyor width: 1100 mm, axis dimensions: 3500 mm POS. Platform 3, volume 1, 1kW, conveyor width: 1100 mm, axle size: 4700 mm Standard discharge height: 2800 mm (greater than possible with distance feet as shown on the illustration) Ordering goods Further information and data upon request

Condition: new, Year of construction: 2025, machine/vehicle number: 180965471, Additional options and accessories Notes Mobile impact crusher on crawler track The K1 impact crusher with tracked undercarriage, the new addition to the product range with impact mill with a capacity of 250 t/h . Can be equipped with closed circuit re-screening to perfectly calibrate the final product. It is appreciated for the excellent quality of the crushed product and also gives its best in terms of operating economy. Production capacity: approx. 250 TO/H Proportional distributor with \"Load Sensing \" for optimization of the system and reduction of fuel consumption by approx. 30%. gap hydraulically adjustable even during the crushing operation fast blocking system with wedges and folding cylinders dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from start of operation of the plant Technical data: Itodpfx Ashd Naioa Esr Impact crusher type M x 700 mm Crushing gap from 30 (20) to 100 mm (gap adjustment to 20mm only possible with 3rd grinding track) Feed hopper 4 m³ - 1800 x 3700 mm Grizzly feeder 900 x 3400 mm Main conveyor belt 800 x 9600 mm 4 cylinder diesel engine with constant speed 82 HP/60 KW , exhaust gas stage V Control panel chain drive 400 x 2900 mm Weight: kg Transport length 12560 mm Transport width:2550 mm Transport height 3200 mm More information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: new, Year of construction: 2025, machine/vehicle number: 988906827, fully mobile concrete fuel station Frumecar Fastmix * THE STRESSED GAS STATION * - Year of construction: New - 2-4 chambers with 7-14 m³ capacity - capacity: 14-25 m³-h depending on mixer size - mixer size: 0,5 m³ - 0,75 m³ -1,0 m³ - Concrete software from Siemens with self-service terminal and new barcode method and EC card terminal - concrete discharge conveyor 9m length - Cement silo 32 to. incl. cement screw conveyor - installation, commissioning and training incl. Itsdpfx Aajhd I Sms Eor - 2 years warranty - Highest quality plant on the market. All components produced in produced. Electric motors and gearboxes from Siemens installed. Other plant components from the market leader VAM. Input errors and mistakes in this offer are expressly reserved. Only the specific agreements in the order confirmation or in the purchase contract are decisive. more construction machines and mixing plants on our website Further information Purpose: construction, Usable material: concrete, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: used, Year of construction: 2023, operating hours: 248 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tyres (front): 600/70 R30, Tyres (rear): 710/70 R42, Operating hours: 248, First registration: 17.12.2024 _____ Standard equipment/technical data ENGINE Max. power 180/245 kW/HP (ISO 14396) Max. torque 1100 Nm Maximum power with power boost 194/265 kW/HP Max. torque with power boost 1178 Nm 6-cylinder, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V Emission standard (DOC+SC+SCR) without EGR, Stage V Electronic engine management with Vistronic fan control Engine speed memory Powercore engine air filter with pre-cleaner EasyCare cooling package Additional fuel pre-filter with water separator 500-litre fuel tank Itsdpovv Dp Nefx Aa Eer

Condition: new, functionality: fully functional, power: 367.75 kW (500.00 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 4,250 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, 🇬🇧Iveco T-Way 500 Equipment CIFA RY 1300 ADVANCE concrete mixer • Anti-wear protection for 25x8 mm propellers • Two manholes • Rolling rollers diam. 250 mm with balance support • Central reduction gear • Water tank, capacity 1200 | + 80 litre oil tank • W a t e r • Quick water connection on both sides • Concrete consistency detection pressure gauge • Double electro-hydraulic controls (one push-button panel in the truck cabin and one rear, removable, with 3 m of cable) • Two additional chute sections, with fixing supports on the subframe • Four-start, edged propellers at the unloading point • Wear-resistant plates on the loading hopper and unloading chute • Unit completely sandblasted and protected with anti-rust primer • Water pump and chute lifting cylinder, hydraulically operated by the distributor • Heat exchanger • Approved folding rear underrun protection bar • Emergency Start/Stop buttons for the vehicle engine Optional Isdpfsv Apf Nex Aa Estr • No. 2 additional chute sections > EKOS CAP - POSSIBILITY OF CUSTOM FINANCING OR LEASING ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS 0 DOWN PAYMENT TEL. -0823 1686306 -335 6713062 -377 7064530 OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 SATURDAY 08:30/14:00 WE OFFER A WIDE CHOICE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA sway S-WAY -5500-V8-650-580-730-s500-S 500-S500Stralis-MAN-NISSAN v8-Intarder- 770s-limited edition-660 S semi-trailer-refrigerated semi-trailer - Lamberet-schmitz ISUZU-FIXED BODY-CRANE-TIPPING-TARPAD-BOX-TAIL LOADER-COLD BOX-INSULATED WITH FRIDGE - VAN

Condition: used, mileage: 247,575 km, power: 77 kW (104.69 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 2,248 kg, maximum load weight: 551 kg, overall weight: 2,799 kg, next inspection (TÜV): 01/2025, fuel: diesel, CO₂ emissions: 172 g/km, fuel consumption (urban): 7.3 l/100km, fuel consumption (extra-urban): 6.1 l/100km, fuel consumption (combined): 6.5 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 5,120 mm, Year of construction: 2016, construction height: 1,980 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, trailer coupling, AdBlue system malfunction. The Ford Transit Custom 290 2.0 TDCi is a reliable used car, ideal for business people. It was first registered in November 2016 and has a mileage of 247,575 km. With a powerful 2.0-liter diesel engine and an output of 77 kW (105 hp), it offers efficient performance and meets the Euro 5 emissions standard. The vehicle is equipped with a manual transmission and has an average consumption of 6.5 l/100 km. The panel van model is characterized by practical equipment features, including air conditioning, cruise control, trailer hitch (AHK) and workshop fittings. Driver and passenger airbags as well as modern assistance systems such as the hill start assist ensure safety. Additional features such as an on-board computer, parking pilot system front and rear, and adjustable steering column increase driving comfort. The rear wing doors with a 180 degree opening angle and a sliding door allow for flexible loading options. The vehicle is in good condition, but the AdBlue system has a fault. The loading volume is optimized by a high partition. Other highlights include the medium-high roof variant, tinted glazing and an extensive interior filter. The dimensions are 5,120 mm in length, 2,032 mm in width and 1,982 mm in height. With a green environmental sticker, the Transit can be used in many environmental zones. Special equipment: Iodpfstyz D Nox Aa Estr Airbag on passenger side, vehicle without vinyl floor covering in the loading/passenger compartment, rear wing doors with glazing (opening angle 180 degrees), tailgate without glazing, high loading compartment partition behind driver and passenger, with window and through-loading option below, parking pilot system front and rear, visibility package 1 Other equipment: Airbag on driver side, traction control (ASR), basic, indicator light integrated in exterior mirror, on-board computer, electric brake force distribution (EBD), driver assistance system: hill start assist, interior filter: pollen filter, body/structure: high-space box, body variant: medium-high roof, steering column (steering wheel) adjustable in height/length, truck registration, engine 2.0 liter - 77 kW TDCi KAT, radio preparation, 4 speakers, wheelbase 2933 mm, spare wheel in driving tires, low emissions according to Euro 6 emission standard, headlights H4, sliding door in the loading/passenger compartment on the right, mud flaps at the front and rear, side protection strips, bumpers partially painted, tinted glazing, paneling in the loading/FG compartment: half-high, lashing rails on the side of the loading compartment Equipment was determined using a VIN query, errors can occur here for technical reasons COC is available Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Year of construction: 2015, condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. Isdpfsu R Rtbox Aa Eotr The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Year of construction: 2023, operating hours: 95 h, functionality: fully functional, total width: 2,950 mm, total length: 6,200 mm, total height: 4,530 mm, overall weight: 6,200 kg, belt width: 1,500 mm, fuel: electricity, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, transport height: 2,350 mm, transport length: 6,030 mm, transport width: 2,250 mm, Equipment: documentation/manual, Westeria mobile air separator type AirLift move for the separation of heavy and light materials. Typical applications in the recycling / waste management industry, for example for separating film from compost (fine or coarse grain) and mixed construction waste. Throughput capacity between 100-150 m³/h depending on material properties Working width: 1500 Color: RAL 3020 C3M RAL 7040 Including Itodpfxjvrcigo Aa Eer - DiscSpreader for optimum material distribution in the separator process - Pipe for blowing the lightweight material into on-site containers

Condition: used, Year of construction: 2022, operating hours: 550 h, Lightly used and well-maintained Komatsu PC 20 R-5 mini excavator Technical data: * Operating weight incl. attachments approx. 2,000 kg * Komatsu 3D67E-2A engine with 11.8 kW * Overall length: 3,845 mm * Overall height: 2,370 mm * Overall width (minimum): 1,280 mm (990 mm) * Track width: 230 mm * Tail swing radius: 1,120 mm * Track length: 1,570 mm * Max. digging reach: 4,100 mm * Max. digging depth: 2,370 mm * Minimum swing radius: 1,515 mm Equipment included: * 2 travel speeds with auto shift-down * Servo control * Long dipper arm * 2-way auxiliary hydraulics to the boom (switchable for hammer operation) * Protective cover on the boom lift cylinder * Work light on the boom * Dozer blade * Travel alarm (acoustic) * Tool kit * CE conformity * Cab with heater Isdpfx Aajrwvvyo Eetr * 1x standard hydraulic circuit (with pedal) * Suspension driver's seat with fixed 2-point safety belt * Rubber tracks * Mechanical quick coupler LEHNHOFF MS01 + load hook Other: * Attachments are NOT included - sale on request

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 92 880 13, opening: approx. 1.030 x 720 mm rotor-Ø x –width: 1.000 x 1.000 mm weight: approx. 13 t. Itodjlhrufopfx Aa Esr