XPF 62 INERTYS press - 62 HL

BUCHER

Condition: used, Year of construction: 2021, operating hours: 2,774 h, mileage: 13,117 km, overall weight: 4,800 kg, fuel type: electric, operation weight: 4,800 kg, maximum load weight: 1 kg, empty load weight: 3,100 kg, tire size: 215/75 R16, total length: 5,280 mm, tire condition: 85 %, front tire size: 215/75 R16 | 85%, rear tire size: 215/75 R16 | 85%, maximum speed: 50 km/h, Tires (front): 215/75 R16, Tires (rear): 215/75 R16, Operating hours: 2774, Battery: Li-ion 63 kWh, Width: 1300, First registered: November 2, 2021, Charger: Integrated 22 kW, self-propelled_____Basic equipment of the fully electric CityCat V20e: Cab: Comfortable, suspended, soundproofed aluminum cab. Windshield made of heat-insulating, curved, low-reflection safety glass. Two sliding windows in each door. Multi-stage heater fan, sun visors, windshield wiper with washer. Individually adjustable, suspended driver's seat with headrest and 3-point safety belt. Angle- and height-adjustable steering column. Chassis: Two-part ladder frame chassis with "C" profile construction. Independent wheel suspension via shock absorbers and coil springs on the front axle and leaf spring suspension with shock absorbers on the rear axle. Axles and steering: Electrically driven front axle with self-locking differential (Torsen differential). Articulated steering with load-sensing steering hydraulics. Working hydraulics: Electrically driven hydraulic unit with low-noise gear pumps for steering, auxiliary functions, and front and side brush drive. Brakes: Hydraulic servo dual-circuit braking system with disc brakes on the front and rear axles. Parking brake (spring-loaded brake) acting on the front axle. Drive system: Working speed 0-15 km/h Travel speed 0-50 km/h* Gradeability up to 30% Electric drive output 88 kW Electric fan 8.5 kW Electro-hydraulic unit 12 kW HV battery: Battery type Li-ion Battery capacity 63 kWh Nominal voltage 335 volts Operating time up to 10 hours Charging system: Integrated charger 22 kW Type 2 charging plug Charging time 2 to 3 hours Steering: Hydrostatic articulated steering (right-hand drive), with load-sensing control Hydraulics: Hydraulic unit with low-noise gear pumps for fan, steering, auxiliary functions, and front and side brush drive On-board voltage: 12 V electrics, 95 Ah battery Hydraulic servo dual-circuit braking system with disc brakes on the front axle and disc brakes on the rear axle, spring-loaded brake (parking brake) and handbrake valve acting on the front axle. Tires: 4 wheels with 215/75 R16C M+S. Dimensions: Length 4200 mm Width 1300 mm Height 1999 mm Wheelbase 1900 mm Track width 1090 mm Sweeping width 2100 mm Sweeping width with 3rd brush 2700 mm Special equipment: - Lithium-Ion NMC battery, 63kWh, 335V - RAL 9016 white - Suction hose, 4m long (incl. suction pipe), diameter 120mm, with Storz couplings, with hydraulic closing flap - Third front disc brush - Brush diameter. 800mm, with front arm, swivels left and right with hydraulic tilt adjustment - Hydraulic tilt adjustment of both side brushes - Side adjustment of both side brushes, stepless hydraulic adjustment of both brushes individually - Easy clean quick cleaning system for cleaning the KGB side walls, recuperation and leaf grille - Hydraulic side brush pressure regulation of both side brushes with side brush individual lifting, combined - Radio DAB+ with CD MP3, Bluetooth, microphone - Heated exterior mirrors - Broom sp Kdsdpeiwwghjfx Ag Ueg

Year of construction: 2024, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Capacity: 3000 kg/h. Kodpeq Nl Aqefx Ag Usdg The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. -The juice yield of apples using our belt press 3000 is ~75 %. -There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. -The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. -The belt press 3000 includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. -Pneumatic lifting of the security cover of the press ensures easier access when cleaning. -After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. -Belt tension is adjustable. -Machine is made entirely of stainless steel and has adjustable feet for more convenient use. -Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Condition: used, Year of construction: 2016, operating hours: 3,597 h, mileage: 66,228 km, fuel type: diesel, Operating hours: 3597, First registration: 23.06.2016, self-propelled _____ Standard basic equipment: Fan unit - fan drive hydraulically operated via a gearbox-independent PTO located on the chassis (semi-hydrostatic drive) – Hydraulic fan drive – Hydraulic oil tank 50 l – Engine compartment finished with sound-absorbing material – Fan exhaust guided upward through the front superstructure of the hopper – Hydraulic pump, single for sweepings hopper – Sweepings hopper (with tailgate and sieve) and water tank made of 1.4003 stainless steel – Engine compartment paneling, standard steel – Gross hopper volume 6.5 m³ – Hopper floor made of alloyed stainless steel, 1.4301 – Hopper tipping angle approx. 55 degrees – Dirt chute made of stainless steel, 1.4003 – Inspection hatches right and left – Dirty water drain 4", A-coupling – Air guide sieve, manually foldable – 2 amber rotating beacons at rear of hopper – Pneumatically actuated air shut-off valve on suction hose – Multi-stage safety support, pneumatically operated – Marker lights at rear of hopper, side marker lights – Integrated water tank – Provision for rear suction hose boom or roof-mounted – Side marker lights. Sweeping intake – Intake, wear-resistant coated – Coarse pickup by tilting the suction nozzle – Suction hose diameter 250 mm – Disc brush, pushed – Disc brushes, hydraulically driven, steel – Disc brushes, steel, diameter 500 mm, pulled – Infinitely variable speed regulation for disc brushes – Two robust swiveling trailing wheels – Automatic raising of sweeping units when reversing – Working lights for sweeping assembly. Kdjdpfx Agefy Am Us Uog Roller brush – Roller brush mounting, pulled – Brush length 1,300 mm, brush diameter 406 mm with synthetic bristles (chassis-dependent) – Hydraulically driven roller brush – Throw limit skirt for roller brush assembly. Water system – Water tank capacity approx. 1,554 l – Water tank made of 1.4003 stainless steel, coated – Water level indicator in cab – Water filling device, Storz C (2"), right – Manual water filling device, right and left – Water pump, hydraulically driven – Automatic water stop when lifting the sweeping units – Spray water connection, 3/4", rear right – Water blow-out system – Electric water valves in the cab – Dual nozzle bar, low pressure front. Instrument cluster and control panel – Bucher instrument cluster, incl. 7" color display – Ergonomic control unit mounted on driver’s door, equipped with main functions – Display includes the following features: water level indicator, operating hours, and rear axle load – Warning and indicator lights for rear axle load – Control and regulation unit for adjusting brush pressure (brush relief), stepless speed regulation of disc brushes – Electric valves for water system, operated from the cab – Operation of debris hopper functions via cable remote control from cab, also operable from outside – Operation of air guide sieve, controlled at rear right of vehicle – Overload indicator for rear axle load, warning light in display (option).

Condition: used, Year of construction: 2014, operating hours: 4,031 h, mileage: 68,000 km, power: 175 kW (237.93 HP), overall weight: 15,000 kg, operation weight: 15,000 kg, maximum load weight: 15 kg, maximum speed: 90 km/h, Operating hours: 4,031, First registration: 29.08.2014_____ Mounted on Atego 1324 4x chassis #WDB9752622L829876Body number: 204654Engine no.: SH32040618U2265113Dual sweeping machine Mercedes-Benz with Bucher Johnston superstructure. Gross volume 6.5 cubic meters.Twin-sided dirt collectionEquipment:- Special paint LA1 2603 deep orange- Water recycling- High-pressure washing system- Manual suction hose- Brush inclination adjustment from cabin- Manual water valves in the cab,Storage location: 54595 Prüm Kdjdpfju Ay T Isx Ag Ueg

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF450HD special waste baler is the ideal baler for compacting difficult materials such as PET bottles, food cans and metal containers, big bags, plastic canisters and plastic packaging, but also scrap tyres and car bumpers can be reduced to a minimum of volume with the baler. The special baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Loading aperture: 1200 W x 680 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Extra-long dual cylinders for even and early compaction of the material User-friendly lever control Bale kicker for easy eject the bales Extra retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting PET bottles Food cans and sheet metal containers Canisters and plastic containers / packaging Scrap tyres and car bumpers Big bags Cardboard and plastic film / foils Other difficult valuable materials Optional extras Kodjvug Dyjpfx Ag Ujdg Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls / bale wire Motor 11 kW 32 Amp Demo-Video shows BTS-MF550HD Special Waste Baler. Can Baler, Can Waste Baler, PET Baler, PET Compactor, Tyre Baler, Tire Baler, Scrap Tyre Baler, Scrap Tire Baler, Tyre Compactor, Tire Compactor, Can Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: used, Year of construction: 2018, operating hours: 5,544 h, mileage: 89,600 km, power: 55 kW (74.78 HP), Operating hours: 5,544, First registration: 23.02.2018_____Carrier vehicle: DB Atego 1324 #WDB96752620163901 Equipment: - Color: white - Rubber-lined and wear-resistant suction shaft - Pneumatic shaker screens, air-operated cleaning system - Rear impact plate - Stainless steel chain curtain - Multifunction module for tailgate closure - High performance suction wheel and bearings for standard Maxigap or Varigap suction nozzles - Contact pressure control for gutter brush Powasave - Gutter brush, 710 mm diameter (only V651 and V801) - One-piece sweeping roller - Autoloc - Locking for sweeping units - Rotatilt gutter brush tilt adjustment right - Variabrush positioning system for gutter brushes - Additional spray bar in front of sweeping roller - Powascrub pressure regulation for center brush/sweeping roller - Infinitely variable sweeping roller speed adjustment - Powaboom - Hand suction hose mounted above, 200mm, hydraulically height-adjustable - Double hand suction hose storage system - Supawash 3 - High-pressure washing system with spray bar - Side high-pressure nozzle for side brush (in combination with Supawash 3) right - Reversing camera for integrated monitor + 2 additional cameras - Rear position lights - 2 additional LED work lights at rear - 2 side LED work lights - 2 yellow flashing LED beacons at rear - Control console holder for central and door control panel - Type A hydrant coupling, 2.1 inch - High-pressure washing system with high-pressure lance and spray bar for roller brush and suction mouth - Water drain screens mounted on rear door Special equipment: - Side underride protection left side - Relocated battery box - TÜV approval - Chassis programming - Tachograph inspection and sealing Location: Thamm u. Schuler-Klä Ksdpfou Ay Tzjx Ag Uodg

Condition: used, Year of construction: 2024, operating hours: 1,004 h, power: 118 kW (160.44 HP), color: orange, Operating hours: 1004, First registration: 18.06.2024 Basic equipment: Steering: Hydrostatic four-wheel steering with hydraulic power assistance Axles: Rear axle as a driven steering axle with differential; Front axle as a non-driven axle with coil springs and shock absorbers Hydraulics: The latest electronic control concept enables consumption- and noise-optimized control of the diesel engine for a hydrostatic drive across the entire speed range without power loss. Diesel consumption and emissions are significantly reduced thanks to the electronic control system and the Euro 6d diesel engine. Valuable resources and the entire vehicle system are preserved. Comparative tests have shown diesel savings of 30% and a noise reduction of 20% during relocation operations. These positive effects also translate into lower operating costs. Brakes: Hydraulic dual-circuit braking system with hydraulic power assistance. Disc brakes front and rear. Hydraulic spring-loaded parking brake on the rear axle. Four brake calipers at the front and two at the rear. Cabin: Comfortable, sound-insulated cab, suspended on hydraulic mounts. Windscreen of heat-insulated, curved, low-reflection safety glass. Two sliding windows in every door. Multi-stage heater fan. Sun visor. Windshield wiper with washer. Air-suspended driver’s seat and spring-suspended passenger seat, both individually adjustable. Steering column adjustable in angle and height. Clearly laid out and ergonomically arranged control and monitoring instruments with a 7'' color display. Visual and audible warning system for temperature and fluid level monitoring. Visual diagnostic system with intuitive design. Sweeping debris intake: Suction intake principle, with trailing, stainless-steel suction mouth in front of axle; together with side brooms, laterally hydraulically adjustable up to 400 mm. Continuously variable high-performance suction fan. Debris container: Hydraulically tiltable and closable container with a volume of 5.6 m³. Tipping height 930 mm. High-tip height 1550 mm. Dump width 1700 mm. Dump angle 51°. Water system: Water tank approx. 880 liters. One water pump for nozzles. Brooms: Two sweeping brooms left and right, Ø 900 mm, speed continuously adjustable from 0-150 rpm, collision protection. Three front brooms for sweeping width up to max. 3768 mm and for sweeping corners and ramps, usable on left, right and second level. Kodpfx Aow Hlvkeg Uedg Special equipment: - RAL 2011 orange - Hydraulic suction pipe flap for closing the feed pipe - Leaf grid lifting device for raising and lowering the leaf grid in the debris container via hydraulic hand pump - Easyclean quick cleaning system for cleaning the container side walls, fan, recuperation, and leaf grid - 1 wild weed broom incl. special separating apron / 2x without broom bristles supplied loose - 3rd front broom in reinforced version (SL only) Front broom in reinforced design (standard bristles), with linear adjustment, tilt adjustment in both directions, downforce regulation, greater reach, larger sweeping area - Leaf suction hose mounted on the side – length 3.5 m, Ø 160 mm; can be mounted on both sides - Fully integrated, CFC-free air conditioning system

Condition: like new (used), Eillert C25 H Potato rumbler Stainless, 25Kg capacity, suitable for potatoes, carrots and other root veg, 3Ph Kdjdpfehpqyksx Ag Usg

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, drive motor, drive motor, gear pump, gear pump -Manufacturer: Bucher, hydraulic pump gear pump -Type: AP200/11.5 S 259 -Flange/shaft: see photo, square 8 x 17 mm -Number: 2x pumps available -Price: per piece Kdsdpfx Aovwkh Ujg Usg -Dimensions: 98/84/H100 mm -Weight: 2.3 kg/piece

Year of construction: 1994, condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bucher, hydraulic unit from press brake HACO type PPES 30135 -Hydraulic pump: type QT43-020R -Engine: EMI 14.9 kW / 1460 rpm Kedpfjrc Ilkex Ag Uedg -Individual components: see photos -Dimensions: 970/420/H370 mm -Weight: 185 kg

Condition: used, Used syrup room with pasteurizer Alfa Laval This second hand Syrup Room is a complete processing section designed for the preparation of concentrated base syrups and finished syrups for beverage production. Engineered for integration upstream of a premix and an isobaric filler, it supports efficient industrial packaging workflows in a used bottling line. It is ideal for beverage production environments that require reliable sugar dissolving, thermal treatment, and hygienic storage prior to mixing, carbonation, and filling. The system covers the full syrup preparation sequence: simple syrup creation from treated water and sugar, finished syrup blending with concentrates, acids, colors, and flavors, and hygienic storage in stainless steel tanks. A dedicated pasteurizer helps ensure product stability, while mixers and pumps support consistent, repeatable processing. This Syrup Room is well suited for soft drink formulations such as cola, tonic, and other flavored carbonated beverages, and it integrates seamlessly with premix units that add CO2 just before the filling machine. The plant layout and component selection make it a practical solution for upgrading or expanding a used bottling line in the beverage production sector. Technical Specifications & Performance Data Sugar dissolver: AICMA Pasteurizer: Alfa Laval Kdedpfexywg Sex Ag Uog Storage tanks (finished/simple syrup): 4 x 4,000 L Cavalzani Storage tanks (finished/simple syrup): 3 x 2,000 L Bertuzzi Mixers and pumps: Included for circulation, transfer, and blending Process materials: Treated water, sugar/sweeteners, fruit concentrates, flavors, additives Construction: Stainless steel AISI 304/316 process equipment Cleaning: CIP-ready design for sanitary cleaning in place Advanced Automation & Control Systems The Syrup Room features a centralized control panel with analog/digital selectors for process management, enabling operators to supervise dissolving, thermal treatment, storage, and transfer operations. Dosing can be achieved using precision pumping and flow control to maintain recipe accuracy. Hygienic design, sanitary valves, and instrument connections support repeatability and quality. The configuration is suitable for integration with plant-level automation and recipe control, with clear operator interfaces that simplify changeovers and routine adjustments while supporting safe and reliable operation. Production Line Integration Capabilities This processing plant is designed to feed finished syrup to a premix unit, where it is blended with treated water and CO2 immediately before the isobaric filler. It can be integrated inline with existing beverage production and industrial packaging equipment and is compatible with used bottling line layouts handling both PET and glass bottling downstream. Recipe-based operation supports multi-flavor portfolios, and transfer connections allow straightforward tie-in to upstream water treatment and downstream premix and filling systems.

Condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor, gear pump, gear pump -Manufacturer: Bucher, hydraulic pump gear pump -Type: AP200/6.5 S-259 -Dimensions: 100/80/H80 mm -Weight: 1.9 kg Kjdpfx Agjgn Hyme Uodg

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, drive motor, drive motor, gear pump, gear pump -Manufacturer: Bucher, hydraulic pump gear pump -Type: AP200/8.5 S 259 -Flange/shaft: see photo, square 8 x 17 mm -Number: 8x pumps available -Price: per piece -Dimensions: 84/82/H100 mm -Weight: 2.0 kg Kdodpfxevwka Dj Ag Ueg

Condition: good (used), functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, MECOF CS 50 CNC Universal Milling SELCA S3045L, Built 1997, Two axis Head C-Axes 360° x A-Axes 3° Bed 13,300 x 1,090 mm. X, Column travel 12,000 mm Ksdpfxjwdm U Nj Ag Usdg Y, Headstock vertical travel 1,800 mm Z, Frame 390 x 390 mm, stroke 1,000 mm Bed 13,300 x 1,090 mm Two axis Head C-Axes 360° x A-Axes 3° Spindle taper ISO 50 Spindle speed 10 - 4,500 rpm Spindle motor 20 kW Automatic tool changer 41 Tools

Condition: used, Year of construction: 2023, operating hours: 736 h, mileage: 10,000 km, Operating hours: 736, First registration: 27.09.2023 Engine: PX-76 inline-six diesel engine, 6.7 liters. Output: 194 kW (264 hp) at 2300 rpm. Max. torque 1000 Nm at 1000–1700 rpm. Model: LF 260 FA 4x2 truck, 16t D0555471. Driven rear axle with mechanical differential lock. Brake system: Exhaust brake integrated into the Electronic Braking System (EBS). When activated via the steering wheel switch, the exhaust brake engages upon releasing the accelerator. Emission class: Euro 6. Kdjdpjx S Tp Ajfx Ag Ujg Transmission: 6-speed manual transmission (6S1000 OD, ratio 6.75–0.78). Wheelbase: 3250 mm. Chassis weight: Technically permissible chassis weight 16,000 kg. Cabin: Day cab with steel bumper, tinted windows, and electric windows. Electrically heated main mirrors and wide-angle mirrors. Cabin width: 2130 mm. Tinted sun visor above windshield (green). Daytime running lights, bumper-mounted lighting units with combined fog light and cornering function. Electrically adjustable main mirrors. Central locking system with exterior light check, includes 2 remote controls and 2 transmitter keys. Air-suspended luxury driver’s seat with adjustable damping and pneumatic lumbar support. Seat cushion heating, integrated headrest, 3-point seat belt, velour seat cover. Driver’s seat armrest. Manually controlled air conditioning with recirculation function. Communication & Fleet Management: Radio/USB player. Speaker system with 2 speakers. Truck phone. Hands-free kit with SIM card slot (for 2G or 3G network) and Bluetooth antenna. Multipoint pairing allows simultaneous operation of two mobile phones via steering wheel. Paintwork: Cabin color RAL 2011. Standard equipment: Hydrostatic transmission HGB2, max. 1400 Nm and approx. 340 hp. Built-in mechanical transfer transmission with integrated hydrostat for stepless speed control during sweeping operation. Transport speed 0–85 km/h via standard transmission (cruise control optional). This power take-off enables stepless sweeping speed adjustment forwards (1–40 km/h) and reverse (1–10 km/h) via electronic accelerator pedal (Easy Drive). Suction power can be regulated independently of speed between ECO and Max. Sweeper unit fuel tank approx. 190 l. Hydraulic fan drive. Hydraulic oil tank 50 l. Engine compartment soundproofed, fan exhaust upwards via container front, stepless electronic turbine adjustment, single hydraulic pump. Debris container: Debris container (with tailgate and sieve) and water tank made from 1.4003 stainless steel. Gross debris hopper volume 6.5 m³, hopper floor made of alloyed stainless steel 1.4301. Hopper tilt angle approx. 55 degrees, dirt chute made from 1.4003 stainless steel, inspection flap left and right. Dirty water drain via clamp hose and 2" drain valve. Air duct sieve manually foldable. 2 orange LED beacons at rear of debris hopper. External hydraulically operated suction pipe flap. 4-stage…