Powder coating

Braun Himmel HA 5-2-9/500

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, Glass tempering furnace EFCO, 1500x3000 Redoxguqnopfx Acvor 1500 x 3000 mm, Right – Left Year: 1997. 415 V, 50 Hz, 3 Ph. In good technical condition. Disassembled and ready for loading.

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Rsdpfxswf Dpgo Acvsr Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: used, functionality: fully functional, Precise Defect Identification The Optyx sorting platforms are characterized by exceptional color, shape, size and texture recognition. High resolution Vis/IR, Tri-chromatic, or UV cameras ensure even the subtlest defects are identified and targeted for removal increasing quality. Precise Removal of Defects and Foreign Material The intelligent ejection system features precision pneumatic-based valves with exceptional response time for pinpoint accuracy. Unparalleled yield improvement can be achieved with the optional three-way sorting. Intelligent Sorting Advanced object-based image processing allows FMAlert™ to track foreign material providing you with a digital record. Custom algorithms determine shape, length, width, curvature, symmetry, circularity and other special characteristics improving quality. Using cameras, Optyx recognizes the size and shape of each object, as well as millions of subtle color differences. As the product passes through the sorter, it inspects it from above while on the conveyor belt. The product is then moved to the end of the Optyx conveyor for an overhead view from below. Using proprietary image processing technology designed specifically for dates, the sorter quickly analyzes the images, comparing each item to previously defined standards as accepted or rejected. When the sorter identifies objects to separate from the main product section, it activates the ejector system, comprised of a series of air valves that reach the full width of the system. As the air is expelled, the valves identify each object to be separated and removed from the main product section. Features & Benefits • Multiple camera configurations to match product requirements • High Resolution Vis/IR, UV or Tri-chromatic camera options • HID, UV, & LED lighting options • Simple, user-friendly operation, cleaning and maintenance • Easy adjustment for product change over • Wet or dry products. Typical Applications Potatoes (chips, whole, strips, sliced, diced, wedges), fruits, nuts, vegetables, cereal, confectionery, dry beans, fresh-cut (including core removal), raisins, snack foods, wet or dry products. Sorting Excellence Green bean processors use an Optyx 3000 to re-sort the defect streams of other sorters to increase yields. Redpfxjwnxupj Acvjr Output. 6 TN metric/H = 13,000 lbs/h = 5,896 kg/h. Production may vary depending on the product. Work measures: Long tape: 2.20 m. Tape width: 0.66 m Download: 1.22 m.

Condition: used, System D8 brand painting chain, 94.50 linear meters, complete with towing, tracks and chain. Rjdpem D Hcfjfx Acvsr

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. Rodsfz Dubspfx Acvjr - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: GG520A-17518 & GG502S-16471, total width: 5,100 mm, total length: 5,350 mm, total height: 1,500 mm, overall weight: 3,250 kg, type of input current: three-phase, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 3,700 mm, Maximum measurement: 3210 mm Minimum measurement: 150 mm Maximum cutting length: 3700 mm Minimum cutting length: 250 mm Monolithic: 3–10 mm Laminated: minimum 2+0.38+2 (22-1) maximum 8+4.56+8 (88-12) Maximum glass weight for loading/unloading on arms: 450 kg Redpfxeycgiij Acvor

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: GG60SB-13594, total width: 4,030 mm, total length: 7,000 mm, overall weight: 2,500 kg, input current: 11 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 3,300 mm, feed length Y-axis: 6,100 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Bottero float cutting table (shapes) 2-19mm, max cutting size L6100x3300mm Rjdpfjxrmpmjx Acvor Dimensions: L7000xW4030mm, weight +/-2500Kg

Condition: ready for operation (used), Two Machines Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Refurbished in 2021 Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Rodpfx Asxlknmocvor Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Condition: new, Year of construction: 2025, HORIZONTAL POWDER COATING LINE FOR ALUMINUM PROFILES We are adding value to your production. * Conveyor speed up to your capacity per day Aerial conveyor - monorail or power&free type Automatized powder coating booth, metal or PVC antistatic structure Reciprocated automatic powder coating equipment system Tunnel type polymerization oven - gas, diesel or electrical heating source Made in Türkiye CE Mark Rjdpevv Nh Rsfx Acvor We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Laminated glass cutting line BOTTERO 545 VSX-46 + 100 BLC-J With low-e deletion Year of production: 2008 Maximum laminated glass cutting length: 4600 mm Rodpfxoxlqzas Acver Maximum laminated glass thickness: 10 + 4.56 PVB + 10 mm Tilting loading table with belts 101 BLC-J is included Very good and clean condition Good working order, tested As is Available immediately