SCREW COMPRESSOR BOGE S 20

BOGE S 20

Condition: good (used), Year of construction: 2001, MANUFACTURER BOGE MODEL S20 Njdpfoyirw Ejx Agwscp SERIAL NO. 40370 YEAR 2001 POWER (kW) 15 CAPACITY (m3/min) 2.06 PRESSURE (bar) 10

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. Nsdotpf N Uopfx Agwocp - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm - Shot volume: 96.5 cm³ - Clamping force: 55T - Working hours: 24,210

Condition: used, Year of construction: 2006, functionality: unexamined, overall weight: 4,535 kg, Technical Data (EN) Ncsdpfxjxy Sndj Agwop Manufacturer: CompAir Drucklufttechnik GmbH Model / Type: L160RS-13A Year of Manufacture: 2006 Identification No.: 349031/0163 Total Weight: 4535 kg Compression Medium: Air Voltage / Phase / Frequency: 400 V / 3 Ph / 50 Hz Volume Flow Rate: 20.7 m³/min Stage Pressures: 1st stage: 13 bar Suction Pressure: 1.0 bar Full Load Current: 309 A Motor Speed: 1500 rpm Installed Motor Capacity: 160 kW

Condition: good (used), Year of construction: 2007, Boge S20 - 2 Screw Compressor Nsdpfx Aowlc Tkjgwocp Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped. Discharge pressure: 10.00 bar Motor power: 15.00 kW Free air delivery: 2.24 m³/min

Condition: excellent (used), Boy 80M Ncsdomt Hh Espfx Agwsp Year 1998 Closing 80 tons Scrow 36 mm Spray weighted 132 g spar distance 41x 35,8

Condition: excellent (used), BOGE S20 screw compressor, machine after servicing Technical data Capacity: 2.06 m³/min (2060 L/min); 15 kW motor; max pressure: 10 bar; operating hours: 4823 h; net price: 7,800 PLN gross price: 9,594 PLN Ncjdpfx Aew Niawjgwop Below is a link to a video.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. Nodpfx Aowxtb Eegwscp The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: good (used), Year of construction: 2016, Table size 3000 x 1700mm, Traverses X Y Z 3200 x 2100 x 920mm, Table load 11,000kgs, Ncjdpowu Dlaefx Agwsp spindle nose to table 164 – 1084 mm, spindle bored Din 50, spindle speed 6000 rpm, 40 station ATC, Hurco Winmax 5 control. swarf conveyor

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Nedou Rptyepfx Agwjcp Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Year of construction: 1988, condition: used, 480 x 325mm; 14,000c/h; 7 stations 6 feeders 279 Card gluer Ncsdpfxebnczbo Agwjp 1 folder feeder 1529 Stapling station 300 Trimmer