Boiler 5 MW, rated at 3.5 MW
Biomassekessel Urbas 5 MW

Name: Biomassekessel Urbas 5 MW
Brand: Biomassekessel Urbas
Availability: InStock

Year of construction

2002

Condition

Used

Location

Szymiszów

Boiler 5 MW, rated at 3.5 MW Biomassekessel Urbas 5 MW

Show map

Machine data

Machine type:: Boiler 5 MW, rated at 3.5 MW

Manufacturer:: Biomassekessel Urbas

Model:: 5 MW

Year of construction:: 2002

Condition:: excellent (used)

Price & Location

Location:: Ligonia 13, 47-161 Szymiszow, Polen

Call

Details about the offer

Listing ID:: A20524660

Update:: 26.12.2025

Description

We offer a biomass boiler from the renowned company Urbas – a top-of-the-line product for burning moist biomass.
Manufacturer: URBAS Austria
Type: UR-FRR
Output: 5 MW, Type-certified from 3.5 MW
Year of manufacture: 2002
Water temperature: 110 °C
Operating pressure: 6 bar
Boiler type-certified due to legal requirements and the absence of an electrostatic precipitator.
Electrostatic precipitator reduced from 3.5 MW
Fuel: Wood chips, bark, sawdust, Granulation: G 100, Maximum humidity: 60%
The offer includes:
Electrical barrier set, complete labeled wiring
Pumps and valves set, sensors and probes, thermometers, piping, a multicyclone (smoke pre-filter), hydraulic ash removal from the boiler, hydraulically driven grates, and a hydraulic airlock under the firebox.
The hydraulic fuel supply with hydraulic pump, approximately 6 meters long, is equipped with an automatic fire extinguishing system in case of flame flashback.
Lambda probe in the flue pipe.
Approximately 12 m horizontal flue pipe.
Set of recirculation fans, a flue gas fan controlled by a furnace vacuum sensor and temperature. Circulation pump, three-way valve, and shut-off valves. Complete documentation of the electrical installation and program description.

Rjdpjxwnxyefx Aa Esl
Optional at extra cost:
1. Push-through floor from the fuel storage area, 2 racks, floor dimensions 3.8 m x 10 m, including hydraulic pump and complete hydraulic hose set.
2. Insulated, double-walled stainless steel chimney, 500 mm inner diameter, approximately 15 m high.
3. Complete dismantling
Including opening and closing the roof, crane operation, loading, and photographic documentation of the dismantling.

Price to be discussed. Or joint dismantling with ATS Maszyny and the buyer's fitters. Price to be discussed
Dismantling date: from April 6, 2026

Seller

Registered since: 2006

10 listings online

Call

Send inquiry

Telephone & Fax

+48 77 45... show

These listings may also fit your interest.

Listing

Deep hole drilling machine Samag TFZ 2L - 1000

Babberich

984 km

Deep hole drilling machine
SamagTFZ 2L - 1000

Call

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Width: 6300mm Height: 4300mm Rsdpfsvn Sv Usx Aa Eol Weight: 31000kg

See details

Listing

Machining Center - Universal- 5 Axis CHIRON - WERKE GMBH & Mill 800 FA

Germany

5,995 km

Machining Center - Universal- 5 Axis
CHIRON - WERKE GMBH &Mill 800 FA

Call

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 20 - 10.500 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm Rjdpfx Aasu Idgpj Eol table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine xH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *

See details

Listing

6 spindle automatic lathe Schütte SF 26 DNT

Sternenfels

1,282 km

6 spindle automatic lathe
SchütteSF 26 DNT

Call

Year of construction: 1996, condition: used, Schütte SF 26S DNT YOM 1996 Number of spindles: 6 Max bar diameter [mm]: 26 Rsdei Hb Szepfx Aa Eel Auto bar loader: Cucchi BLT Multi-6 - (YOM 2015) Cross slide pos. 1, 3, 4, 6 CN slide pos 2, 5 Spindle stop attachment for main spindles Bar feeding pos. 6 Pickup spindle pos. 6 High pressure coolant system Chip conveyor, hinged belt type Oil mist filter ISI RON/A 2500A, ID 26295

See details

Listing

Weishaupt gas burner Weishaupt Monarch G7/1-D

Wuppertal

1,072 km

Weishaupt gas burner
WeishauptMonarch G7/1-D

Call

Listing

Circular saw flat motor KATT 11 kW für Kappsäge PAUL 27 AO

Scheeßel

1,178 km

Circular saw flat motor KATT 11 kW
für Kappsäge PAUL27 AO

Call

Listing

Double shaft multi-saw with a feeder A. COSTA LEOPARD D

Strenči

2,164 km

Double shaft multi-saw with a feeder
A. COSTALEOPARD D

Call

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: Rjdpfx Aaowrw D Rs Eol max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

See details

Listing

Machining center WMW HECKERT HEC 800 Athletic

Mamer

1,073 km

Machining center
WMW HECKERTHEC 800 Athletic

Call

Condition: excellent (used), Year of construction: 2008, Control system: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Z travel: 1300 mm Pallet size: 800 x 1000 mm Table load: 2000 kg NC rotary table with direct drive Positioning: 0.001° Max. Max. speed of the rotary indexing table: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 KW (25%) / 28 KW (100%) Spindle torque: 1210 NM / 680 NM Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 places Max. Tool diameter: 325 mm Max. Tool length: 800 mm Max. Tool weight: 35 kg Workpiece diameter: 1600 mm Rjdpfx Aaevgxfyo Ejl Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in the tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is supplied with many tools

See details

Listing

CNC Deep Hole Drilling Machine Auerbach IA3 TLF-U

Heilbronn

1,298 km

CNC Deep Hole Drilling Machine
AuerbachIA3 TLF-U

Call

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° Rjdpfxjwcldaj Aa Ejl A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

See details

Listing

Loos U-HD 800kg/h 13Bar Loos U-HD 800kg/h 13Bar Loos U-HD 800kg/h 13Bar

Neumarkt

1,440 km

Loos U-HD 800kg/h 13Bar
Loos U-HD 800kg/h 13BarLoos U-HD 800kg/h 13Bar

Call

Listing

Morbach

1,134 km

Roller table
H.I.TRollenbahn

€7,000

ONO plus VAT

Call

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Rjdpfx Aaeihpn No Eel Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

See details

Advertise here