TEST. SPECIAL 6 CHUCKS CONNECTION 3 LINEAR OUTPUTS PAS 57

BIESSE

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, edge thickness (max.): 22 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, The machine has the following configuration: Pre-milling unit Automatic, timer-controlled intervention and positioning via NC Edge preheating lamps Edge band magazine Glue pot for EVA hot-melt adhesive Premelter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine finishing and contour trimming unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Automatic, timer-controlled intervention End cutting unit RB02 Hnedpfxeyxndbs Abgsk Positioning by NC Glue scraping unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Feed pressure with rubber belt Panel support guides with NC positioning CE marking The machine is sold and delivered as is (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 7673

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,560 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, rotational speed (max.): 20,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis working area: 5,900 mm Y-axis working area: 1,560 mm X-axis travel speed: 80 m/min Y-axis travel speed: 60 m/min Z-axis travel speed: 25 m/min Drilling spindles Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 6 Horizontal drilling spindles in Y-direction: 2 Total number of vertical and horizontal spindles: 28 Milling spindles Number of controlled axes: 4 Motor power: 10 kW Spindle speed: 20,000 rpm Tool changer Number of positions: 10 Tool: head-mounted MACHINE DETAILS Total installed power: 24 kW Control system: WINDOWS Machine programming software: WRT EQUIPMENT Work table with suction cups Number of suction bar rows: 10 Hsdpfxoyxm Swj Abgsnk Suction cups for securing the workpiece Vacuum pump The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photographic documentation and descriptive technical/commercial documents. The buyer is entitled to inspect the item before collection and is responsible for installation, securing and use of the machine at the final destination. External reference: 8173

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 1000017221, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 60 mm, controller model: BSuite3, number of spindles: 17, TECHNICAL DETAILS Working area X-axis: 2,500 mm Working area Y-axis: 900 mm Working area Z-axis: 60 mm Number of axes: 3 Tool: ISO 30 Spindles Total number of spindles: 17 6 vertical in X-axis 5 vertical in Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis MACHINE DETAILS Hodpfoyzpcdox Abgenk Numerical control: BSolid Software - BSuite3 EQUIPMENT Automatic unloading device Integrated blade for groove insertion Front protective and safety systems with mats Perimetric protective grids External reference: MME002

Year of construction: 2014, condition: ready for operation (used), spindle motor power: 4,000 W, spindle speed (max.): 15,000 rpm, number of axes: 3, This 3-axis BIESSE Skipper v31 was manufactured in 2014. It features a powerful 12 kW machine with a main spindle speed of 15,000 rpm. The machine is equipped with 16 drilling spindles (6 horizontal and 10 vertical) and a grooving blade, allowing for versatile drilling and milling capabilities. If you are looking to get high-quality wood boring capabilities, consider the BIESSE Skipper v31 machine we have for sale. Contact us for further details. • Quantity available: 2 units • Machining type: Drilling and milling Hnsdey Ddn Tspfx Abgok • Drilling spindles: 16 total (10 vertical, 6 horizontal) + grooving blade • Maximum workpiece size: X 2500 mm, Y 900 mm • Axis travel speeds: X 25 m/min, Y 50 m/min, Z 25 m/min • Electrical/power: 12 kW installed power; 415 VAC; 21 A

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable speed: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: diameter 10 mm Spindle speed: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles on the X-axis, 12 vertical spindles in the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum tool capacity: 40 m³/h CNC: Display: monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Stock location: Röllbach Hnodpfx Asydf Ndobgsk

Condition: used, machine/vehicle number: 008501, Position 1: 5 Axis CNC Routers BIESSE-ROVER A - SYNCHRO Position 2: Panel Feeding and Loading BIESSE-ROVER A - SYNCHRO Hnsdpfey Af Huex Abgjk

Condition: used, Year of construction: 2012, total height: 2,000 mm, total length: 4,500 mm, total width: 2,350 mm, Empty weight: 1.530 kg Price: On request - Details: - └ Description: Including dust extraction - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 18966 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 11 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Busch - └ Type: MM 1322 A VM8 - └ Year of manufacture: 2012 - └ Main motor power [kW]: 6 - └ Capacity [m³/h]: 360 - └ Connection diameter [mm]: 70 - └ Vacuum pressure [bar]: 300 - Table length [mm]: 3100 - Table width [mm]: 1500 - Working range X [mm]: 3309 - Working range Y [mm]: 1703 - Z-axis working range [mm]: 120 - Current consumption [A]: 24 - Power [kW]: 14.2 - Transport dimensions: 4500mm x 2350mm x 2000mm (l x w x h) - Transport weight [kg]: 1530kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hodoyz Ad Ispfx Abgsnk Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, machine/vehicle number: 008437, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Hnodpfx Absyng Agjgok

Condition: used, machine/vehicle number: 008470, X axis working area: 4300 mm Y axis working area: 2205 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 46 Hedpfx Aeyzyrvebgenk Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008438, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade projection: 60 mm Hsdpfxeyngy Ss Abgonk No of Grippers: 8