Aluminium Circular Saw

BERG & SCHMID VELOX 350 HA MPS

Year of construction: 2024, condition: as good as new (ex-display), -usable internal dimensions: D=970mm H=540mm (other sizes on request) -touch screen -injection pressure: 3 bar -basket load: 200kg -Tank volume: 210L -Standard accessories: - Oil skimmer - Frame, cover and housing made of stainless steel - Time-controlled electric steam extraction - Reinforced basket in stainless steel - Stainless steel electric pump Bdodpfxof A Nq Uo Acvja - Stainless steel filter on the suction side of the pump - Stainless steel heating elements - Mechanical basket rotation with gear motor - Electrical system IP 65, control via SPS (DGT V4) - Automatic water supply - Safety limit switch monitors the cover opening - Spray nozzles in stainless steel - Weekly timer for heating and oil separator - Operating hours counter

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Usable cutting length 5000 mm Blade diameter 550 mm Electronic head tilting Internal/external inclination from 22°30′ to 135 ° Measuring probe Bjdpfx Aeyg Epvecvsda

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide Bsdoxabztspfx Acvsda hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: new, Year of construction: 2023, pipe drilling machine, inclined drilling machine, automatic drilling machine TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + TO BE INSPECTED UNDER POWER - minimum quantity lubrication - manual material clamping - manual feed - max. tube length 3.000mm (option 6.000mm) - positioning accuracy +/- 0,2mm - 10 stops (can be extended as required) - manual insertion and removal of material - drill head swivels +/- 50 - manual 360 degree tube swiveling device - power drilling unit 1 x 2,2 kW - motor speed 295 - 2950 rpm Bsdelgvkiopfx Acvjda - display speed on touch panel - illumination drilling unit - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: new, feed pressure 11 bar intake capacity 480 cm³ volume capacity 360 Receiver capacity 270 l / bar Number of cylinders 1 Stk. motor 400Volt / 3,0KW V / KW turning speeds 892 U/min weight of the machine ca. 200 kg. range L-W-H 1,6 x 0,7 x 1,2 mm Bjdpfx Acevkizgovoda

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture Bdodsf Ekn Iepfx Acvsa • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 3 m Linear Unit: ProfiStop Alpha Material Length: 1680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: used, Year of construction: 2021, total length: 3,020 mm, - Vollkabine mit dem Heizung und komfortablen Dreipunktsicherheitsgurten - Überschlagschutz - Extrem stabiler, hochdruckgeformter Stahlrahmen - bis zu 454 kg Zuladungskapazität, - Anhängelast: 590 kg, - Vierradantrieb und eine teilunabhängige Radaufhängung, - „Active Hill Descent“ zur sicheren, intuitiveren Bedienung, - Frontantrieb oder die Differenzialsperre einzuschltbar duch elektronische Schalter am Armaturenbrett, - Digitale Armaturenbrett mit Gang- und eine Drehzahlanzeige, Geschwindigkeit und Kraftstoffstand, - Hinterradaufhängung: Stoßdämpfer, - Die hydraulischen Bremsen - Weiche Gangschaltung, die Parkstellung ist jetzt Teil des Getriebes - Motor: Yanmar 3TNV70 3 Zylinder mit dem Emissionsvorschriften gemäß der aktuellsten Abgasstufe V. - Rasenschonende niederdruckreifen - Elektrohydraulische Kippvorrichtung für die Ladepritsche. Bdjdpfexpi Sfex Acvja - Eine aufstellbare Heck-und Windschutzscheibe

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Bdsdjg U Uv Rjpfx Acvoa Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t Bdsdpfod N Sm Djx Acvsa +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: SRS CW 2000 2025/1, control type: manual, degree of automation: semi-automatic, actuation type: electric, laser source manufacturer: Raycus / JPT, laser power: 2,000 W, laser wavelength: 1,080 nm, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: AC, type of cooling: water, compressed air connection: 5 bar, overall weight: 175 kg, warranty duration: 36 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer equipment for cleaning and processing metal, stone, and concrete surfaces. Delivery is available within Germany and Austria. As a service provider specializing in surface processing, we can offer you machines tailored to your requirements! Transport costs: Depend on your location and delivery terms Delivery: 4 weeks (working days) after receipt of payment via air freight - Air freight duration: approx. 2 weeks The equipment is NEW and is configured and set up according to customer specifications! Configuration and pricing depend on the customer's requirements and application area. We offer professional training in the operation of the equipment in compliance with UAVA/UVV regulations in both Austria and Germany. As we are a service provider with hands-on experience using our equipment, we can guarantee their functionality. We provide comprehensive on-site instruction, workshop-based training, or customer-specific demonstrations. Payment options: RENTING / LEASING / PURCHASE Technical specifications: Model: RST-FLC-2000W 2026 Laser: Fiber laser Laser power: 1000W / 2000W / 3000W (or Laser: Pulsed 100W to 1000W) Laser wavelength: 1064nm or 1080nm±5 Frequency: 10–50KHz Air or water cooling Net weight: approx. 170kg Dimensions: 98 × 122 × 143 cm Scan width: 5–50 cm Functions: Handheld or automatic Operating temperature: 0–40°C Operating mode: CW Wavelength (nm): 1025–1070 Standard output power: 15KW Laser beam quality (mm*mrad): 4 Adjustable frequency (Hz): 400 to 50,000 Transmission fiber diameter: 50/100 Output power stability: ±2 Power supply: 250V / 16A Operating temperature (°C): 5~35 GUARANTEED at the best price! – RENTING / LEASING / PURCHASE All devices are individually assembled and delivered according to your requirements and our experience. – Product demonstration Bedpfxetxlyrs Acvjda – 24-hour support – Includes maintenance, service & repair We also provide: INDIVIDUAL training in accordance with the UAVA / UVV safety regulations for commissioning laser machines for surface processing. Comprehensive safety consulting regarding the use of laser equipment in compliance with occupational and safety regulations. Routine inspections in accordance with applicable safety standards.