Bandsaw - Horizontal

BERG & SCHMID GBS 250 Super AutoCut

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID Double Miter Bandsaw GBS 250 Super AutoCut, Speed: 35 + 70 • Miter angle left: 60° + right: 45° • Quick-release clamping device, adjustable • Solid clamping device + machine casting • Ball-bearing swivel table Tsdpfor Ik Sqjx Akied • Hydraulic brake cylinder • Large, robust material support • Cooling system • Worm gear running in an oil bath • Enclosed saw frame • Adjustable ball roller bearing • Tool compartment – door in the base • Cutting monitoring via ammeter • Cutting pressure feed rate regulator • Support roller (infeed side) • Machine base (delivered disassembled) GBS 250 Super AutoCut 3-Stage System: I. Automatic saw frame lowering via the hydraulic cylinder, steplessly adjustable feed rate, with limit switch at the end of the cut II. Fast lowering of the saw frame to the workpiece, then switching to normal sawing feed. (e.g., for scoring) III. Hydraulic cylinder acts as a brake cylinder: a) Manual operation (e.g., for ejecting) or b) Lowering in the rest position Saw band dimensions: 2765x27x0.9mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc. available upon request! Delivery time: from stock in Waiblingen, Beinstein.

Condition: good (used), Year of construction: 2003, load capacity: 150 kg, arm reach: 2,700 mm, Model: KR150 Condition: USED Year: 2003 Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets Todpfx Akehakfaeisd Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW Tjdpfx Akjfgyh Toijd weight of the machine ca. 0,42 t Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling

Condition: new, cutting diameter 255 mm saw band length 2765 x 27 x 0,9 mm table height 950 mm 18-110 m/min 255 mm capacity 90 degrees: square 240 mm capacity 90 degrees: flat 300 x 180 mm capacity 45 degrees: round 210 mm capacity 45 degrees: square 190 mm capacity 45 degrees: flat 200 x 160 mm capacity 60 degrees: round 135 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 130 x 100 mm capacity 45 degrees: round rechts 180 mm capacity 45 degrees: square rechts 160 mm capacity 45 degrees: flat rechts 180 x 100 mm 1,5/1,8 kW 350 kg 1700 x 900 x 2000 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately Tjdpfxot I D Tus Akijd - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. Tsdpfxeudi Unj Akijd The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: excellent (used), Year of construction: 2011, Details Manufacturer: Berg & Schmid. Model: GBS250 Super AutoCut. Year of manufacture: 2011. Condition: in excellent working order. Cutting capacity Tedpfx Akjy U Dykeied Round materials (90°): Ø 250 mm Square materials (90°): 230 x 230 mm Round materials (45°): ± 210–220 mm Round materials (60°): ± 160–170 mm Saw blade length: ± 3,000 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Mitre angle & position Left mitre angle: 0–60° Right mitre angle: 0–45° Hydraulic saw arm with adjustable cutting pressure Dimensions Length: approx. 1500 mm. Width: approx. 1700 mm. Height: approx. 1800 mm. Weight: approx. 500 kg.

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available - Tsdpfx Aksi Dfidjied

Condition: new, Year of construction: 2026, CORMAK Z5020 BF Vario Column Drill Press is a versatile and modern metal drilling machine designed for intensive operation in industrial plants, locksmith workshops, and maintenance departments. The machine provides excellent stability, precision, and high working comfort thanks to stepless spindle speed adjustment and an ergonomic design. Main advantages of the machine Stepless spindle speed adjustment – a range of 190–2700 rpm allows optimal adjustment of parameters to the type of material being processed. Rigid machine body construction – minimizes vibrations and improves drilling accuracy. Height-adjustable worktable – precise rack adjustment and the possibility of tilting within a range of ±45°. Electronic speed indicator – provides real-time control of drilling parameters. Laser pointer and LED lighting – facilitate tool positioning and improve visibility of the working area. 100 mm machine vice included – the machine is ready for operation immediately after setup. Construction and technology The CORMAK Z5020 BF Vario column drill press is equipped with a stable 70 mm diameter column and a wide 480 × 290 mm base, ensuring excellent support and rigidity of the entire structure. The standard MK2 spindle features a 120 mm stroke, allowing deep drilling without the need to reposition the workpiece. The worktable design enables rotation and tilting, allowing the operator to precisely adjust the position of the workpiece according to the machining operation. Precision and work efficiency The powerful 750 W motor and maximum drilling capacity of 20 mm enable effective machining of most metal materials. The electronic speed indicator and drilling depth stop provide full control over the process. The long column and large table height adjustment range (660 mm) allow machining of taller workpieces and the use of tools with larger reach. Applications The Z5020 BF Vario model is a metal column drill press recommended for: mechanical and locksmith workshops, maintenance departments, light and medium industry, prototype work and single-piece production. Standard equipment 100 mm machine vice Laser drilling pointer LED work light Electronic speed indicator Three-arm spindle feed lever Drilling depth stop Worktable with rack height adjustment Technical specifications Parameter Value Maximum drilling diameter 20 mm Spindle speed range 190–2700 rpm Power supply 230 V Spindle taper MK2 Maximum spindle stroke 120 mm Spindle-to-column distance 170 mm Spindle-to-base distance 1060 mm Table height adjustment range 660 mm Tjdpfxjvuf Iks Akiod Column diameter 70 mm Table dimensions 280 × 280 mm Base dimensions 480 × 290 mm Motor power 750 W Machine height 1650 mm Weight 75 kg

Condition: ready for operation (used), Year of construction: 1992, - Double mitre circular saw ADS type M Todpfxjucuhds Akied - 2 saw heads - max. saw length 5000mm

Condition: used, functionality: fully functional, gearing type: automatic, fuel type: electric, next inspection (TÜV): 10/2025, Year of construction: 2020, operating hours: 900 h, Equipment: UVV, crane, low noise, rubber tracks, tip top condition! Tsdsvriuvjpfx Akiod