Plate shear

BAYKAL HNC

Condition: excellent (used), functionality: fully functional, Baykal hydraulic guillotine shear type HNC 8100/6 working width 8100 mm maximum sheet thickness 6 mm Isdpjx Rbhdofx Ag Uotb motorized backgauge automatic blade gap adjustment automatic cutting angle adjustment sheet support device

Condition: excellent (used), Year of construction: 2024, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 2MAM022829, cooling capacity: 1,000 kW (1,359.62 HP), Cooling Capacity: 959 kW Type of Input Current: 3 Phase / 50 Hz / 400 V Type of Cooling: Air-cooled Overall Weight: 7,973 kg (Operating) / 7,597 kg (Rigging) Ambient Temperature (max.): 35°C Ambient Temperature (min.): 12.8°C (based on part load performance) Compressor Type: Screw, semi-hermetic, VSD controlled Total Power Consumption: 309.9 kW Noise Level: 74 dB(A) 10 m Refrigerant Type: R134a, total charge: 242 kg Water Flow Rate: 146.7 m³/h (40.76 L/s) Pressure Drop (Evaporator): 52.2 – 64.1 kPa COP (Full Load): 3.09 IPLV (Part Load): 5.12 Number of Fans: 14 units (7+7), with low sound kit Nameplate Available: Itjdpfsimz Uasx Ag Uob Year of Manufacture: 2018

Condition: new, Year of construction: 2025, Swing cut guillotine shear Cutting length 3100mm Material thickness steel 10mm Knife for stainless steel Touch control Cybelec backgauge 1000mm Cutting gap adjustable via control Iedpfx Agslac Dre Uetb Delivery time 3 months

Condition: new, Year of construction: 2025, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. * Changeable valf for the wastewater decharging Itsdpsh I N Udofx Ag Ujb * Main swicth and emergency stop switch. * Timer and working hours timer * Special construction of control panel(EU Standarts) included

Condition: new, Year of construction: 2025, * 60 lt Capacity * 2,2 kW High performance three phase current drive motor. * Adjustable speed control up to 200 rpm. Itodpfx Aeh Nnbcsg Uob * Control panel and dosing pump included. - The dosage pump automaticly puts the chemical to the bowl * Working hours timer * PU or INOX plate * Changeable valve for the wastewater decharging. * Inner bowl has canals and gaps for ensuring non stick wall.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: PP120/40, Hot Wall Pulsed Plasma Nitriding Furnace (tandem with 2 bases) Control system was refurbished in 2018 Furnace Model : Plateg PP120/40 Loading Dimensions Diameter : 1000 mm Height : 1250 mm Max. Load Weight : 1000 kg (gross) Plasma Power : 40 kVA Iodpfx Aowmfyvsg Ujtb Heaters Power : 3x13,5 kW, (3 zones) Electrical Connection : 400V 3 phase 50 Hz

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Itjdpfx Ajl Sm N Teg Usb Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: as good as new (ex-display), Year of construction: 2025, Tool testing press 150to installation height 1000mm stroke 600mm ram plate 1500mm x 1000mm table surface 1500mm x 1000mm Front light curtain Siemem control Weight 12,5to Itodpfx Agjkw Rbae Uob

Condition: new, MGH is Baykal’s Hydraulic Swing-Beam Shearing Machine, engineered for reliable and efficient straight-line cutting of sheet metal. It is ideal for general-purpose shearing applications where simplicity, durability, and low maintenance are essential. MGH series is well-suited for fabrication shops, small-to-medium metal workshops, and industrial manufacturers. Iodpfjwnalvsx Ag Ustb

Condition: new, We have stock for Protac500 the thickness are 8mm and 10mm Itedpfx Aeph Rmceg Uob These plates can be used in bulletproof applications requiring armor