Hydraulic pump 500 bar

Bauknecht 500 bar

Year of construction: 1995, condition: excellent (used), 2 units centrifugal pumps Sulzer MB 80-230/3 Flow rate: 79-89 m³/h Head: 240-230 m Max. temperature: 130°C Seal: Mechanical seal with flush water connection Drive power: Siemens 90 kW Speed: 2980 rpm Ksdjd Sybujpfx Ac Nsdw ! Price per unit !

Year of construction: 1996, condition: good (used), machine/vehicle number: 96.01112.1496, Stationary high pressure pump unit Hammelmann HDP 112 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 300 bar Delivery rate: 153 l/min. Drive speed: 1500 rpm. Drive power: 90 kW with VEM motor 90 kW 3~motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: ca. 2300x1000x1400 mm weight: approx. 1500 kg Year of manufacture: 1996 Kdedohtnnijpfx Ac New Condition: in good used condition.

Condition: new, bore capacity in steel (diameter) 40 mm throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min 190 mm 490 mm table surface area 700 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° Kdodpfx Aceupw Uze Nsw - Feed via hand crank

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm Kedpfeu Dm E Hsx Ac Njdw >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Year of construction: 2016, condition: new, 1 piece reconditioned unused industrial bevel helical gearbox from ASUG. TGL 21815 All parts of the gearbox are renewed, except the housing !!! Claw coupling: 800 mm (only one half available) Maximum torque: 27.829 Nm Gear ratio: i= 1:80 max. power: 51 kW oil filling: 170 kg Speed: n1= 1400 Speed: n2= 17,5 weight: 1450 Kg Shaft diameter d1: 65mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Kedpfxogwlrds Ac Njdw Total height h2: 925mm Length from base: 1170 mm !! Gearbox has no oil cooler !

Condition: like new (used), Manufacturer: Flender Type: K2S-2,5 Backstop: Yes Power: 78 kW Ratio: 44,16:1 RPM in/out: 1.400 / 31,7 Shaft ø in: 65 mm Shaft ø out: 140 mm Kdodjg Stz Aspfx Ac New

Year of construction: 1995, condition: excellent (used), 3 units centrifugal pumps Sulzer MB 40-160/5 Flow rate: 32 m³/h Head: 147 m Max. temperature: 130°C Seal: Mechanical seal with barrier water Drive power: Siemens 22 kW Speed: 2950 rpm Kdsdpsd Sybpjfx Ac Nsw ! Price per unit !

Condition: good (used), functionality: fully functional, motor manufacturer: VEM, power: 110 kW (149.56 HP), volume flow: 679 m³/h, Used ammonia compressor Sabroe TSMC - 116 S. Water cooled, well maintained, working condition, replaced because of new Sabroe compressor installation. Cooling capacity ~100kW (-20C). Controlled by Carell controller which can be included if requested. Motor 110kW. Some original parts also will be included. Kjdpfx Aeuq Hnyjc Nsdw The compressor has been used in the production of fat/margarine. It normally operated at a suction pressure of 0.1–0.2 BAR, which resulted in an evaporating temperature (T₀) of -25°C and a condensing temperature (Tₖ) of +35°C, with a compressor capacity of approximately 100 kW. The compressor can also operate at a lower suction pressure to achieve lower temperatures, for example, between -30°C and -35°C.

Year of construction: 1990, condition: used, Material: regular steel Driving force: 55 kW Kdodpfxjgb D Ire Ac Now Dimensions: aaprox. L 1600 mm x W 1000 mm x H 900 mm Empty weight: approx. 1500 kg Flow rate: 14.4 m3/h Operating pressure: 100 bar Technical documentation: no Message: piston: 57mm, stroke rate: 326 rpm, stroke: 105mm

Year of construction: 1989, condition: good (used), Good condition, with connection for sealing water. Head : 86 meter / 8,6 bar Flow rate : 600 m³/h Rotation speed: 1450 rpm Kdedpfxjc Iu Uij Ac Now Drive line: 190 Kw Can also be used as a turbine!