Pull-out drawer heavy-duty shelf with roll-out floor

BARTELS SR-SO 3,0 x 1.5

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time Lsdsh Ek Daspfx Al Isrn - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: good (used), Crane system with two fixed (l= ~6.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Lsdeg Dgh Ijpfx Al Iern Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: good (used), Price plus VAT. The product is also available in other quantities and configurations. This package includes: 14 x uprights at 5,000 mm x 1,100 m (blue) 78 x crossbeams at 2,700 mm (yellow) 156 x locking pins This results in a racking row with 13 bays, each with 3 levels + a base level = a total of 156 pallet spaces (1,000 kg/pallet). Approximately 70 uprights and 1,000 crossbeams are available for this system. Simply contact us. Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Height: 5,000 mm Length: approx. 36.50 running meters Racking depth: 1,100 mm Bracing: bolted Crossbeam length: 2,700 mm Bay load: 2,400 kg Row load: 12,000 kg Pallet spaces: 156 Accessories such as: Floor anchoring Connectors Load warning signs Impact protection Guardrails Grating Back panel grating Lrsdpfxeibwrue Al Ion Deep stringers Barrier railings and much more... Just ask us!

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. Lodpoiyyc Eofx Al Iern More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Condition: good (used), Price plus VAT. The goods are also available in other quantities and designs. This package includes: 8 x uprights, 5,000mm x 1,100m (blue) 56 x crossbeams, 2,700mm (yellow) Lredeibwriopfx Al Ien 112 x locking pins This results in a shelving row with 7 bays, each with 4 levels + floor space = a total of 105 pallet spaces (800kg/pallet). Approximately 70 uprights and 1000 crossbeams are available for this system. Please contact us. Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Height: 5,000 mm Length: approx. 19.70 running meters Shelf depth: 1,100 mm Bracing: bolted Crossbeam length: 2,700 mm Bay load: 2400 kg Row load: 12000 kg Pallet spaces: 105 Accessories such as: Floor anchor Connector Load warning signs Impact protection Guard rails Grating Back panel grating Deep shelf support Barrier railing and much more… Just ask us!

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Lrjdeydpxvspfx Al Ion Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: used, Year of construction: 1988, arm length 2.200 mm height of hook 2.600 mm weight of the machine ca. 1,8 t weight max. in kg 1000 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Lrsdpfx Aljg N Di Rj Ion Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, functionality: fully functional, COLMAL hydraulic press brake 3000x250 ton, 4 axes, throat 300 mm. Dimensions: 380x350x180 (H) cm, weight 14,100 kg. Ljdpfx Aswyng Sjl Iorn

Condition: new, total power requirements: 11column width: 3050pressure: 125bending length: 3050number of axes: 3weight approx.: 9600messurements (LxWxH): 3660 x 1340 x 2400stroke: 200back gauge: 500table height: 900Oil tank capacity: 120 Press brake control unit: Esa S 630 CNC 10 2D graphic screen - touch screen Control panel control panel: Pivoting pendant arm Optional Hydraulic Brake Brake Valve: With CE safety signals Press Brake Safety PLC : Mcs Plc Safety PLC Press Brake Laser Safety System: Dsp-Ap safety block (laser manual height adjustment) Back gauge for press brake: X axis, 500mm reach, including 2 fingers, manually adjustable height and sideways. Press brake fingers for backgauge: Standard Xf Arka Ve Yan Muhafazalar: Var (Ce'Li Model) Press Brake Upper Tool Clamping: Manual European Type L: 150mm (Promecam) Press Brake Upper Tool: Eurostamp 1260 / Standard (835 mm and 805 mm divided into 595 mm and 210 mm) Press brake die holder: Mechanical European type standard width (Promecam) CNC adjustable motorized CNC crowning (V axis) Press brake lower die: Eurostamp 2067 / Standard (835 mm and 805 mm divided into 100 mm left, 395 mm, 210 mm and 100 mm right) press brake Lredpohutz Sofx Al Ion Press brake front support: Xf Ön Destek Front support for press brake: 2 supports, manually adjustable in height and lateral position. Electrical System: 380V-660V, 50-60 Hz, 3 Ph ( I E 3 ) Cooling system for control cabinets: ventilation with fan Number of Foot Pedals: One

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a vertical metal sheet storage system, the STOREMASTER Rolly Tower, complete with an ABUS crane and a vacuum sheet lifting device. The equipment is used, in very good condition, and has seen limited use. It is currently disconnected, but the entire system is complete. The storage system is designed for efficient storage of sheet metal, as well as for fast and safe loading and unloading of sheets. The shelves are manually retractable, and the sheets are moved using a crane with a vacuum lifting device. Technical specifications: Manufacturer: Storemaster Model: Rolly Tower Year of manufacture: 2012 System dimensions (L × W × H): 4200 × 1700 × 4360 mm Sheet dimensions: up to 3000 × 1500 mm Maximum shelf load: 3000 kg Number of shelves: 13 retractable shelves Additional storage space at the top: 4 Crane: ABUS Crane lifting capacity: 500 kg Vacuum lifting device lifting capacity: 250 kg Jib length: 6000 mm Total system weight: approximately 10,000 kg Total electrical power: 4 kW Advantages: Compact vertical storage High storage density Fast sheet access Safe loading and unloading of sheets ABUS crane included Vacuum sheet lifting device included Robust industrial design Lightly used, very good condition Lrodpfx Ajzfglnol Isn Application: Ideal for metalworking, sheet metal production, ventilation, facades, roofing, metal structures, and other companies that require efficient sheet storage and fast material handling. If you have any further questions, we will be happy to answer them.