Center lathe

Ayel-Tech BT 400 ( 3506 )

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Hjdjthd Shspfx Ampel Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! Hsdpjf Sqcksfx Ampsl 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: excellent (used), Dividing head Walter Type UPA 125 N (28487) direct and indirect dividing center height 125 mm Hjdpfx Amjtrnndopsl Can be used horizontally and vertically Spindle holder MK 4 KKG 3 Travel bag SPH 125 mm Mounting MK 2 Total transport weight 62 kg dividing head 48 kg

Condition: new, Center length ----- 1500 mm Center height ----- 230 mm Spindle diameter ----- 460 mm Main spindle passage ----- 80 mm Bed width ----- 336 mm Spindle speed ----- 25-1800 rpm Motor ----- 5.5 KW Hsdpfjh U Nztjx Ampel HEAVY DUTY VERSION - WEIGHT 2650 KG INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOB2 with 4 rungs * 3 Chuck 250 mm * 4 Chuck 320 mm * 350 mm clamping plate * Fixed and moving glasses * LED working light and cooling system * Electric brake CE * Box with various tools

Condition: new, functionality: fully functional, Fervi T047/400VDA Gear-Driven Milling and Drilling Machine with Tapping 400V 1.5kW BRAND NEW “CE” CERTIFIED Promo price – single unit available while stocks last. The machine can be used for: Milling Drilling Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Max drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with indexable cutter: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Taper: MT 4 Quill stroke: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Head tilt: ± 60° Spindle speed: (12) 75 ÷ 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Table dimensions: 585 x 190 mm Hedpfx Aog Npiwjmpsl T-slot: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg.

Condition: used, Year of construction: 1998, capacity 90 degrees: round 250 mm capacity 90 degrees: square 240 mm saw band length 2965 x 27 x 0,9 mm table height mm band speed 37 / 76 m/min total power requirement 1,0 kW Hedsu Sbpvopfx Ampel weight of the machine ca. 0,38 t dimensions of the machine ca. 1,0 x 1,6 x 1,4 m double miter band saw

Condition: new, Universal milling machine Make: OPTimill Model: MT 50 Item no.: 3336005 Condition: New machine Travels: - X-axis 580 mm - Y-axis 200 mm - Z-axis 340 mm serially equipped with: - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - Long milling arbor 16 mm - Mandrel long 22 mm - Drill chuck holder B 18 Hedpebnfxuofx Ampjl - Gear rim drill chuck 3-16 mm/B 18 - Reducing chuck MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - Machine light - Coolant device - Operating tool - Operating instructions

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Hedpeu Rptyofx Ampjl Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: used, Year of construction: 2014, total height: 1,950 mm, total length: 2,400 mm, total width: 1,600 mm, Empty weight: 2.000 kg Price: On request - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 3098034 - Drive system: CNC - Centre height [mm]: 450 Hsdpfx Amoxq Aqwepol - Swing over bed [mm]: 900 - Distance between centres [mm]: 900 - Bed width [mm]: 445 - Spindle bore [mm]: 60 - Max. spindle speed [rpm]: 1800 - X-axis travel [mm]: 203 - Z-axis travel [mm]: 762 - Transport dimensions: 2400mm x 1600mm x 1950mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Hsdsh Hvk Aopfx Ampsl Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition