Pipe sawing and beveling machine

AXXAIR CC 322

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Cgodpfxsfu Itbj Agfju Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: used, functionality: fully functional, overall weight: 310 kg, Weight: 310 kg Dimensions: 900x700x1550(h) mm Motor power: 3 kW Solid square: 20x20 mm Solid round: 20 mm diameter Cgedpfx Agox I Rdisfsu Handrail: 60x12 mm

Year of construction: 2024, condition: new, Bending capacity: 6 mm Cgjdpfx Ageftdh Isfsu Bending: 5 mm Bending capacity: 6 mm Bending: 5 mm Bending length: 2,030 mm roller diameter: 170 mm Engine power: 4 kW Length: 3.600 mm Width: 1,020 mm Height: 1.120 mm Weight: 2.400 kg The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes Cgedpfxefu Ivze Agfsu • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires steel [Ø mm]: 0.6 - 1.6 Weldable wires stainless steel [Ø mm]: 0.8 - 1.2 Weldable wires aluminium [Ø mm]: 1 - 1.6 Weldable wires CuSi [Ø mm]: 0.8 - 1.2 Voltage adjustment: stepless MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø mm]: 1.5 - 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Cjdpfx Asy Hfwnegfegu Duty cycle at max. welding current (40°C) [%]: 45 General specifications Open-circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Power supply: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Mains fuse 3~ (50/60 Hz) [A]: 32 Max. positive mains tolerance 3~ (50/60 Hz) [%]: 15 Max. negative mains tolerance 3~ (50/60 Hz) [%]: 15 Power plug: CEE 32 Standards and certifications Protection class: IP32S Insulation class: F Standard: EN 60974-01 Markings/Certifications: CE, S Cooling type: Gas-cooled, water-cooled Cooling Standard cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Case dimensions (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Condition: good (used), Vers Demmler welding table, also available individually with numerous accessories. 1 piece, 2000x4000 mm 1 piece, 2000x1000 mm 3 pieces, 2000x1000 mm Thickness: 200 mm, hole spacing: 100 mm Codoy Hf Ndepfx Agfegu

Condition: new, With digital technology, the NEOPULSE 400 CW is a three-phase pulsed MIG / MAG generator for heavy industry. Mobile and equipped with a cooling unit and a high-performance unwinding system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Intuitive and functional, its digital interface makes it possible to act on the welding parameters with ease. MULTIPROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - Flux-cored wire: Ø 0.9 to 2.4 mm Cgedpjmxkggefx Agfeu MMA DC / Pulsed: basic, rutile and cellulosic electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up Cgedpfx Ajmb U Tuogfju • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 1000 Amps at 100%. Idealarc® DC-1000 Submerged Arc Welder Input voltage: 230/460 Input current: 193/96.5A Input Hertz: 60 Input phase: 3 Input power: 230/460/3/60 Mode icon: DC/DC Output range: 150-1300A DC,16-46V Cgedpfx Aju Afttjgfou Polarity: DC Nominal output: 1000A/44V/100%

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency Cedpfx Aegvkktsgfjgu - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money