Vertical machining center
AWEA BM-1200

Name: AWEA BM-1200
Brand: AWEA
Price: 11900 EUR
Availability: InStock

Year of construction

2007

Condition

Used (fully functional)

Location

Nordrhein-Westfalen Germany

Observe auction

Machine data

Machine type:: Vertical machining center

Manufacturer:: AWEA

Model:: BM-1200

Machine number:: 7076

Year of construction:: 2007

Condition:: ready for operation (used)

Functionality:: fully functional

Technical details

Travel distance X-axis:: 1,200 mm

Travel distance Y-axis:: 600 mm

Travel distance Z-axis:: 600 mm

Controller model:: Heidenhain iTNC 530

Spindle speed (max.):: 6,000 rpm

Provision

Location:: Nordrhein-Westfalen, Germany – Distance: about 1,061 km

Availability:: as of end of auction

Delivery conditions:: FCA

Costs for dismantling & loading:
free

Pick up at location:
free

Shipping costs:

Description

TECHNICAL DETAILS

Travel X-axis: 1,200 mm
Travel Y-axis: 600 mm
Travel Z-axis: 600 mm

Work Table
Clamping surface: 1,300 × 600 mm
Max. table load: 1,200 kg
Distance from table to spindle nose: 125–725 mm

Spindle and Tool Interface
Max. spindle speed: 6,000 rpm
Spindle taper: SK 50
Spindle motor power S1: 10 kW

Feeds and Rapid Traverses
Feed rate: 1 – 10,000 mm/min
Rapid traverse X-axis: 20 m/min
Rapid traverse Y-axis: 20 m/min
Rapid traverse Z-axis: 15 m/min

Tool Changer
Number of tool stations: 24
Max. tool diameter: 80 mm
Max. tool diameter with free adjacent stations: 150 mm
Max. tool length: 250 mm
Max. tool weight: 8 kg

MACHINE DETAILS

Control type: CNC
Control: Heidenhain iTNC 530

Internal coolant supply: 20 bar

Total power requirement: 25 kVA

Dimensions & Weight
Machine dimensions: 3,600 × 2,300 × 3,000 mm
Machine weight: approx. 7,500 kg

EQUIPMENT
CNC contouring control Heidenhain iTNC 530
Electronic handwheel
Spindle oil cooler
24-position double-arm tool changer
Preparation for hydraulic machine vice
Preparation for 3D probe
Chip conveyor
Coolant system with internal coolant supply
Machine documentation

The listing was translated automatically. Translation errors are possible.

Payment processing

Closing costs:: 18 %

Terms of payment:: 100 % prepayment

Payment methods:: Bank transfer

Invoicing will be in the amount of the highest bid plus any dismantling/loading costs and shipping costs as well as the closing costs and statutory VAT.

Details about the offer

Listing ID:: A22448667

Reference number:: AUC-2607244

Update:: 29.07.2026

Exclusive offer:: Only available in auction

Observe

Contact

Contact person: Cedric Schuhmann

Machine-ID: 22448667

+49 201 8... show

Telephone: +49 201 857 861 77

Machineseeker buyer protection

Secure payment via escrow account

Strictly controlled seller

Personal and multilingual support

Payout of the purchase price only after handover of goods

Inspection

Inspection possible

Machine under working conditions

Machineseeker generally recommends inspecting used machines.

All information is given to the best knowledge and belief. See for yourself on site.

Seller

Professional commercial seller
With Machineseeker since 2003

Nordrhein-Westfalen Germany Germany

Distance: about 1,061 km

Your machine could be offered here

Auctioning with the No. 1

You will sell within just a few weeks!

You will sell at the highest price!

You will sell with no fixed costs and no risks!

or call +49 201 857 861 10

Discuss collaboration

These listings may also fit your interest.

Listing

Dieburg

1,240 km

Vertical machining center
AWEABM-1200

Call

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale is an AWEA BM-1200 CNC-controlled vertical machining center, manufactured in 06/2008. The machine is equipped with a Heidenhain iTNC 530 CNC control system and features an automatic tool changer with 40 tool positions. In addition, the machine is equipped with internal coolant / cooling through the spindle, a high-pressure coolant system, and a chip conveyor. Technical data / equipment: Manufacturer: AWEA Mechatronic Co., Ltd. Model: BM-1200 Serial number: 8015 Date of manufacture: 06/2008 Control system: Heidenhain iTNC 530 15" TFT color display Tool holder: BT40 Spindle speed: 50 – 12,000 rpm Spindle power: 21 / 15 kW Direct drive spindle Travel X-axis: 1,200 mm Travel Y-axis: 600 mm Travel Z-axis: 600 mm Table size: 1,300 x 600 mm Rapid traverse X/Y: 30 m/min Rapid traverse Z: 24 m/min Tool magazine: 40 positions Tool change time: approx. 4 seconds Dual gripper Internal coolant / cooling through the spindle, Type A Psdpszp Iz Ejfx Anzegp High-pressure coolant pump 20 bar Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Heidenhain infrared probe system TS 640 Signal light 3-color Red/Yellow/Green Completely enclosed work area with work area lighting Machine documentation available Toolbox Alignment screws and washers CE specification Weight according to nameplate: approx. 7,500 kg Voltage: 400 V Connected load: 25 kVA Frequency: 50/60 Hz 3 phases Condition: The machine is in used condition but is complete and well-maintained. Inspection and test run possible by arrangement.

See details

Listing

Vertical machining center AWEA BM-1200-II

Cuggiono

1,509 km

Vertical machining center
AWEABM-1200-II

Call

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,200 kg, total height: 24,920 mm, total length: 38,970 mm, total width: 30,700 mm, table length: 1,300 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, tool weight: 7 g, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1200 II" with FANUC 0i-MF Plus CNC Accessories standard: Pgjdpfx Ansrhi Rkozop 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light

See details

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
All prices and bids are net prices and do not include VAT.
Stated dismantling and loading costs are binding.
All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
The duration of an auction may be subject to change.
By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
Submitted direct or maximum bids are binding.
Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
The General Auction Terms of Machineseeker Group GmbH apply.