Second-hand machinery for sale (2,399)

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 250028, power: 250 kW (339.91 HP), pressure (min.): 4 bar, pressure (max.): 13.5 bar, The pneumatic container is used to provide oil-free, dry compressed air for test equipment. TECHNICAL DETAILS Maximum air flow: 42.83 m³/min Pressure range: 4 - 13.5 bar Oil-free compressed air capacity: 42 m³/min at max. 7.5 bar Drive Motor power: 250 kW System structure Compressor: EKO 250 D Refrigeration dryer: HHDp 4500 / HF 5-M/5 Activated carbon adsorber: BEKO Clearpoint L 3400 V Post-filter: HF 6-60 Oil-water separator: BEKO Öwamat 16 Electric condensate drain: BEKO 14 MACHINE DETAILS Compressor unit: 4,000 x 2,100 x 2,500 mm Overall dimensions (L x W x H): 13,000 x 2,950 x 2,900mm Dehxzjv Rdltsuf Ijut Total weight: 20,000 kg

Condition: good (used), Year of construction: 2005, Functionality: fully functional, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 100 mm, workpiece spindle speed (max.): 90,000 rpm, controller model: Bosch Rexroth MTX, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Area of application: Hard machining Control: Bosch Rexroth MTX Djhev E Rkrjxzuf Ijut Working area Axes: 6 axes X1,Z1, X2 & Z2: Hydrostatic axes B1: Workpiece spindle P01: Internal loader Dimensions working area: 200 x 200 x 100 mm Spindle & tools Number of work spindles: 1 (1x internal grinding, 1x external grinding) Number of tools: 2 Tool holder: External wheel max. Ø500 mm, internal wheel for high frequency spindle Speeds Workpiece: max. 1,375 rpm External grinding wheel: max. 1,375 rpm Internal grinding wheel: max. 90,000 rpm (high frequency spindle) MACHINE DETAILS Machine dimensions (LxWxH): 3.9 x 2.7 x 2.62 m Machine weight: 6,050 kg EQUIPMENT - Part handling: Manual or with Baumann loader - Exhaust air: Extraction system from LOSMA - Units: Hydraulic and hydrostatic oil supply - Cooling unit for hydrostatics and high-frequency spindle

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 390 mm, table load: 350 kg, rotational speed (max.): 8,000 rpm, tool diameter: 100 mm, Placing a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Control: Fagor 8055 X-axis: 760 mm Y-axis: 430 mm Z-axis: 390 mm Max. rapid traverse: 24 m/min Spindle motor Continuous power: 5.7 kW Continuous power (1 hour): 7.5 kW Max. speed: 8,000 rpm Work table Dimensions: 900 x 410 mm Max. load: 350 kg Tool handling Max. tool length: 200 mm Max. tool diameter: 100 mm Duohxzov Ifl Nouf Iot Max. tool diameter with free adjacent positions: 130 mm Max. tool weight: 8 kg Tool change time: 10 s Max. number of tools: 16 MACHINE DETAILS Length: 2.2 m Width: 2.0 m Height: 2.4 m Weight: 3,000 kg Connected load: 15 kVA No additional tools or clamping devices are included.

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, turning length: 1,500 mm, turning diameter over bed slide: 475 mm, rotational speed (max.): 4,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,680 mm, Placing a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Control: Fagor CNC 8055 Turning diameter over recess: 710 mm Turning diameter over cross slide: 240 mm Turning diameter over bed: 475 mm Max. turning length (with turret): 1,500 mm Spindle Bar capacity: 51 mm Recess of spindle nose: 248 mm Spindle nose: ASA D1-6 Spindle bore: 65 mm Speed range: 100 - 4,500 rpm Spindle power: 11 kW Max. torque: 29.3 kgm Tool handling Duohxzufsv Ifw Ss Iet Tool positions: 8 Square tool shaft height: 25 mm Shaft diameter for boring bar: 40 mm Tool holder: VDI 30 Indexing time: 0.42 s Travel paths X-axis: 260 mm Z-axis: 1,680 mm Rapid traverse speeds Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 15 m/min Tailstock Max. workpiece weight (with tailstock): 1,500 kg Tailstock quill taper: MK 5 Quill range: 150 m Quill diameter: 80 mm Quill taper: MK 5 Bed width: 355 mm X-axis motor: 7.3 Nm Z-axis motor: 11.9 Nm Chuck dimensions: 200/4,000 mm MACHINE DETAILS Dimensions (L x W x H): 3,520 x 1,935 x 2,022 mm Weight: 3,150 kg Foundation: 2,920 x 2,055 mm No additional tools or clamping devices included.

Condition: good (used), Year of construction: 2000, operating hours: 21,900 h, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 495 mm, table width: 1,230 mm, table length: 410 mm, TECHNICAL DETAILS X-travel: 700 mm Y-travel: 315 mm Z-travel: 495 mm Quill travel: 180 mm Control: Heidenhain TNC 426 4th axis: available Table clamping area: 1,230 x 410 mm Tool holder: SK 30 MACHINE DETAILS Total power requirement: 20 kW Machine weight: approx. 3.2 t Dohxzusv Du E Dof Ijut Operating hours: 66,200 h Spindle hours: 21,900 h EQUIPMENT - Renishaw measuring probe Tools, clamping devices and accessories are only part of the scope of delivery if they are listed under EQUIPMENT.

Condition: used, Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 17037, travel distance X-axis: 1,050 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,160 mm, workpiece weight (max.): 1,000 kg, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 240, No reserve price - guaranteed sale at the highest bid! Incl. refurbished second spare spindle and refurbished drive motor. Machine with rotary pallet storage and extended tool magazine! Duehxzev Ai Uwjuf Iet TECHNICAL DETAILS X-axis: 1,050 mm Y-axis: 1,000 mm Z-axis: 1,160 mm Distance from spindle front edge to workpiece carrier center: min. 190 mm Distance from spindle center to workpiece carrier top edge: min. 100 mm Spindle Speed range: 50 - 10,000 rpm Motor power (40% duty cycle): 31 kW Motor power (100% duty cycle): 19 kW Torque (40% duty cycle): 200 Nm Torque (100% duty cycle): 165 Nm Spindle mount: SK-50 Tools Chip-to-chip time (at rapid traverse 40 m/min): 8 s Tool diameter (with free neighboring positions): 250 mm Tool diameter (with occupied neighboring positions): 125 mm Tool length: 800 mm Tool mass: 35 kg Total mass of all tools in the storage: approx. 720 kg Number of tool positions: 240 Measuring system Type: Linear, optical-incremental, distance-coded Accuracy class: ±5 µm Division period of the grating division: 20 µm Input and display unit: 1 µm Pallets Clamping surface: 630 x 630 mm Loading mass per pallet (at rapid traverse 40 m/min): 1,000 kg Permissible moment with off-center load: 750 Nm Directional bore diameter: 25 H6 Hole distance to table center: 200 ± 0.013 mm Fastening thread: 23 x M16 Workpiece clearance height: 1,200 mm Maximum interference circle: Ø1,100 mm (flattened) Automatic pallet change Number of changeable pallets: 2 + 4 pallets in the circular storage Pallet change time (for standard version): 12 s Pallet change time (for version with clamping hydraulics at least): 14 s MACHINE DETAILS Dimensions: 8,200 x 4,400 x 3,600 mm Weight: 18 t Connection power: 75 kVA Temperature range: 10 - 35 °C Sound pressure level: < 80 dBA

Condition: ready for operation (used), Year of construction: 2003, operating hours: 8,810 h, Functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS X-travel: 640 mm Y-travel: 600 mm Z-travel: 500 mm Control: SIEMENS 810D powerline Spindle speed: 12,000 rpm Table dimensions: 850 x 630 mm Table load: max. 600 kg Tool magazine: 30 positions MACHINE DETAILS Dushxzusv Rdbuof Iet Total power requirement: 42 kW Machine weight: approx. 6.5 t Space required: approx. 3.50 x 3.30 x 3.60 m On-time: 52,248 h Spindle hours: 8,810 h EQUIPMENT - BLUM tool breakage/measurement system - Electronic handwheel - 3 leveling elements - Chip conveyor - Interlit SPB coolant/belt filter system 3/600

Condition: not inspected (used), Year of construction: 2006, overall weight: 1,270 kg, arm reach: 2,655 mm, controller manufacturer: FANUC LTD, type of input current: AC, We offer you, Two six-axis industrial robots R-2000iA/210F with two R-J3IB controllers manufactured in 2006 by the Japanese manufacturer FANUC. Industrial robots R-2000iA/210F: Range and dimensions: - maximum range: 2655mm; - robot height: 2850mm; - working range: *axis 1 ±360° *axis 2 ±135° *axis 3 ±166° *axis 4 ±360° *axis 5 ±125° *axis 6 ±360° Load capacity and precision: - maximum load capacity: 210kg; - repeatability: ±0.2mm; - axis speeds: *axis 1 100°/s *axis 2 90°/s axis 3 95°/s *axis 4 120°/s *axis 5 120°/s *axis 6 190°/s Power and energy consumption: - drive power: 5.4kW; - supply voltage: 380-575V AC, 50/60Hz; - power consumption: average 5kVA; Operating environment: - operating temperature: 0°C to 45°C; - humidity: maximum relative humidity 95% (non-condensing); - degree of protection: IP54 (robot body), IP67 (wrist); - robot weight: 1270kg; Control and software: - controller: R-J3iB, R-30iA (depending on configuration) - user interface: Pendant Teach (programming console) - communication options: Ethernet, DeviceNet, Profibus, Profinet, EtherCAT, Modbus Dushxzuev Ewkfef Ist R-J3IB controllers: Technical parameters: - weight: 180kg - voltage: 380-415/440-500VAC - frequency: 50/60Hz - number of phases: 3 - rated power: 12kVA

Condition: ready for operation (used), Year of construction: 2007, operating hours: 8,000 h, Functionality: fully functional, machine/vehicle number: 20907, feed length X-axis: 380 mm, feed length Y-axis: 280 mm, feed length Z-axis: 280 mm, swivel angle A-axis (max.): 360 °, swivel angle C-axis (max.): 340 °, Spindle replaced about 6 years ago - only 8,000 spindle hours! TECHNICAL DETAILS Control: Fanuc GE 160 i Length: 950 mm Width: 310 mm T-slots: 3 x 14 mm Grinding head, grinding spindle Spindle type: Motorized swiveling Drive power: 7.5 kW Speed range: 0 - 9,000 rpm Wheel mount: HSK 50 Wheel diameter: 50 - 200 mm Max. number of wheels: 6 Axes Travel X / Y / Z: 380 / 280 / 280 mm Rapid traverse X / Y / Z: 20 / 20 / 10 m/min Resolution X / Y / Z: 0.0001 mm Drive power X / Y / Z: 1.0 kW, 3 Nm C-axis swivel angle: 340° Rapid traverse: 66°/s Resolution: 0.001° Drive power: 1.0 kW, 3 Nm Rotational axis A: continuous Rapid traverse: 167°/s Resolution: 0.001° Drive power: 0.5 kW, 2 Nm Mounting taper: ISO 50 Spindle height: 210 mm MACHINE DETAILS Width: 1,590 mm Depth: 1,930 mm Height: 2,250 mm Weight: 5,500 kg Noise level: < 70 dB(A) according to DIN 45 635 Operating hours: 30,000 h Power supply Motor power: 7.5 kW Connected load: 33 kVA Voltage: 3 x 400 V AC Hydraulics Type: DMR 300 Principle: Gear pump Drive: Electric motor Voltage: 3 x 230/400 V Filling volume: 11 L Pendulum volume: 4 L Flow rate: 2.8 L/min Operating pressure: max. 98 bar Dujhxzufjv Iptqe Ijt Pneumatics Type: CFG 301 Machine air consumption: approx. 2,000 l/h Measuring system air consumption: approx. 3,000 l/h Air consumption: approx. 1,000 l/h Fire extinguishing system: yes Working pressure: 6 bar Maintenance: Maintenance-free, except for the filters Air quality: according to DIN ISO 8573-1 Central lubrication Type: CFG 012 Principle: Gear pump Drive: Electric motor Tank capacity: 30 bar Pressure limitation: 0.2 l/h Flow rate: 0.2 l/h Ambient temperature: +10°C to +40°C Protection class: IP 54

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller model: Matsuura G-Tech 30i, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -220 °, swivel angle B-axis (max.): 220 °, TECHNICAL DETAILS X-axis: 550 mm Y-axis: 410 mm Z-axis: 450 mm B-axis: ±220° C-axis: 360° CNC control: Matsuura G-Tech 30i Spindle and tool Speed range: 20,000 rpm Tool holder: BT40 Tool length: 300 mm Tool diameter: 150 mm Tool weight: 10 kg Workpiece capacity Workpiece diameter: 300 mm Workpiece weight: 40 kg Dujhxzusv Rb Hhsf Iet MACHINE DETAILS Machine dimensions (W x H x D): 3,032 × 5,120 × 2,705 mm Power consumption: 32 kVA EQUIPMENT - Internal cooling system - Automatic pallet changer - Automatic Tool changer - High-pressure cooling 20 bar - Chip conveyor - FSE chip control

Condition: good (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 122009984, travel distance X-axis: 3,850 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 280 mm, rotational speed (max.): 24,000 rpm, number of slots in tool magazine: 8, No reserve price - guaranteed sale at the highest bid! For milling, drilling and thread cutting work on aluminum, PVC and thin-walled steel profiles for applications in window, facade and metal construction! CONDITION Spindle: New bearings Frequency converter: Recently replaced Tool change: Automatic tool change requires a new sensor - little effort TECHNICAL DETAILS Areas of application: Aluminum, PVC and steel processing Software/control: PC-based EluCam software Processing area X-axis travel: 3,850 mm Y-axis travel: 350 mm Z-axis travel: 280 mm Feed rates (rapid traverse) Dshxjvyg Szszuf Ijut X-axis: 60 m/min Y-axis: 30 m/min Z-axis: 30 m/min Spindle Power: 7 kW Max. speed: 24,000 rpm Tool holder: HSK-F63 angle head (as new, hardly used) Tool changer Type: Automatic tool changer Places: 8 Vices Number: 12 pneumatic double vices Safety equipment Included: light barrier and safety fence MACHINE DETAILS Machine weight: approx. 2,000 kg Dimensions: approx. 5.1 x 3.4 x 2.6 m

Condition: ready for operation (used), Year of construction: 2022, operating hours: 200 h, Functionality: fully functional, load capacity: 120 kg, arm reach: 2,701 mm, TECHNICAL DETAILS Maximum reach: 2,701 mm Nominal load capacity: 120 kg Maximum load capacity: 167 kg Maximum additional load carousel / swing arm / arm: 300 kg / 130 kg / 150 kg Position repeatability (ISO 9283): ±0.05 mm Number of axes: 6 Control system: KR C4 Range of movement A1: ±185° A2: -140° / -5° A3: -120° / 168° A4: ±350° A5: ±125° A6: ±350° Speed at nominal load A1: 120°/s A2: 115°/s A3: 120°/s A4: 190°/s A5: 180°/s A6: 260°/s MACHINE DETAILS Installation position: Floor Installation area: 754 mm x 754 mm Dushxzevi Igfjuf Ist Weight: approx. 1,069 kg Running time: approx. 120 h - 200 h (pre-acceptance, no active use) Network cable length: 10 m Power supply: AS13 134 CTR PNT EPS AIR AIR GDN Ambient temperature during operation: 0 °C to 55 °C (273 K to 328 K) Protection class (IEC 60529): IP65 Degree of protection for robot hand (IEC 60529): IP65 / IP67 EQUIPMENT - KR C4 basic enclosure - Drive configuration SC6.1 - Special paint finish for control cabinet (color: RAL 7035 light grey) - Labeling set de/en KR C4 - Double-bit cabinet lock - Mains supply HAN6 - Power supply XFMRless 400V - CSP Standard 2x USB 3.0 - Safety interface X11 - Kuka WorkVisual - Kuka PLCProConOS4-1 4.1 - SmartPAD holder - SmartPAD - Connecting cable set X20 (15 m) - BUS-smartPAD cable (10 m) - Axis limitation A1 20°

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, spindle speed (max.): 110 rpm, module thread tooth pitch (max.): 6, module thread tooth pitch (min.): 1.5, wheel diameter: 275 mm, TECHNICAL DETAILS Max. gear diameter: 275 mm Module range: min. 1.5 / max. 6 Tooth width: 5.5 mm Helix angle: min. 0° / max. 60° Number of teeth: min. 5 / max. 120 Gear ratio: min. 1:1 / max. 1:10 Drive & Control Control: SINUMERIK 840 C Max. workpiece spindle speed: 110 rpm Cutter head speeds: 20 - 110 rpm Total power requirement: 100 kW Machine weight & dimensions Machine weight: approx. 16.7 t Space requirement: approx. 5,200 x 2,300 x 2,400 mm Dohxzuov Rc Srjf Isut EQUIPMENT - Deburring device U-axis / Q-spindle - Chip conveyor - Coolant system - ELBARON electrostatic air cleaner - No tools or workpiece clamping devices

Year of construction: 2020, Condition: not inspected (used), Functionality: unexamined, We offer you, a grinding line with a PS-H PS-H 600X900 knife mill manufactured by PALLMANN. Dujhxzov Ev Tlsuf Ist The plastic grinding line is used for maximum recovery of plastics from waste in an automated manner on an industrial scale. Technical parameters: Input material: HDPE, PP EPDM Processing capacity: 1.7-2.1t/h Voltage: 400V Equipment: -belt conveyor for the PS-H 600x900 F3/SD5 mill hopper; -tunnel metal detector on the hopper conveyor; -knife mill; -pneumatic extraction system; -double BigBag station for collecting regrind; -mechanical screw feeder for transporting regrind; -automatic filter; -control cabinet. Damage of an operational nature was found in the form of scratches and paint chips or slight deformations.

Condition: good (used), Year of construction: 2006, operating hours: 10,000 h, Functionality: fully functional, turning diameter: 310 mm, spindle speed (max.): 4,500 rpm, controller manufacturer: FANUC, TECHNICAL DETAILS Dujhxzufsvyh Haj Ist Control: FANUC Max. spindle speed: 4,500 rpm Tool turret: 12-way Tailstock: available EQUIPMENT Parts catcher: with box Chip conveyor: available Chuck: Schunk wedge bar chuck Interface: bar loader interface

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, turning length: 350 mm, turning diameter: 340 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 640 mm, controller model: OSP U 100 L, TECHNICAL DETAILS Max. turning length: 350 mm Max. turning diameter: 340 mm Diameter over bed: 530 mm Diameter over cross slide: 380 mm Distance between centers: 1,000 mm CNC control: OSP U 100 L Travel paths X-axis: 260 mm Z-axis: 640 mm Spindle and drive Spindle mount: VDI 40 Duohxjv Rbthozuf Iot Spindle bore: 62 mm Speed: max. 4,500 rpm Spindle motor power: 22 kW Upper turret: 12 positions, driven Lower turret: fixed tools MACHINE DETAILS Dimensions (L x W x H): 3,970 × 2,100 × 1,932 mm Weight: 4,800 kg

Condition: ready for operation (used), Year of construction: 1996, operating hours: 78,796 h, Functionality: fully functional, machine/vehicle number: 11602, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, TECHNICAL DETAILS Travel paths (X/Y/Z): 600 x 450 x 500 mm Table size: 900 x 520 mm Max. table load: 450 kg Control: HEIDENHAIN TNC 426 Speed range: 20 - 6,300 rpm Tool holder: SK40 Drive power: 8.6 kW MACHINE DETAILS Machine dimensions (LxWxH): approx. 2.95 x 2.20 x 2.30 m Dujhxzusv Diycef Iot Space requirement (LxW): approx. 4.55 x 3.60 m Total weight: approx. 4,900 kg Operating voltage: 400 V/3 ~50 Hz

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: R17902436, overall weight: 160 kg, load capacity: 6 kg, arm reach: 1,350 mm, pivoting range: 360 °, TECHNICAL DETAILS Maximum load on the wrist: 6 kg Maximum reach: 1,350 mm Working area Reach: Ø 1,350 mm Height: 500 mm Number of axes: 4 Environment Protection class for mechanics: IP67 (standard) Protection class for wrist and A3 arm: IP67 (standard) Control Type: R-30iB Plus MACHINE DETAILS Electrical voltage: 200-230 V, 3 phases, 50/60 Hz Average power: 2.5 kW Sound power level: 79.2 dB Ambient temperature: 0-45 °C EQUIPMENT Dujhxzjv Rcp Djuf Ist - Integrated signals on the upper arm: 8x In / Out (stop signal) - Integrated air supply

Year of construction: 2017, Condition: not inspected (used), Functionality: unexamined, We offer you, HI-SCAN 6046si detector manufactured in 2017 by Malaysian manufacturer SMITHS DETECTION. X-ray inspection system designed for security checks of baggage, parcels, or screening of technical products. Physical dimensions: length: 2004mm (79 inches) width: 850mm (33 inches) Through-hole size: 62 x 45 cm Tape width 53cm X-ray generator: voltage: 160kV; penetration: ability to penetrate steel up to 37mm; Dehxzuov Ewdxef Iout detector: high-resolution XADA detector modules; resolution: ability to detect wires up to AWG 41; total weight: 400kg (882 pounds) During the inspection, the machine was disconnected from the power supply - no possibility of testing in operation.

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 27578101, travel distance X-axis: 600 mm, travel distance Y-axis: 250 mm, controller model: SIEMENS 840C, number of slots in tool magazine: 90, HIGHLIGHTS - Machine with Promot portal loader - completely overhauled 10 years ago TECHNICAL DATA Control: SIEMENS 840C Tool magazine: 90 places Dshxzusvygxhef Ijut Equipment: turret and sub-spindle

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 121198, turning length: 1,000 mm, turning diameter: 370 mm, spindle speed (max.): 3,800 rpm, bar passage: 62 mm, controller model: OSP-E 100 L, A Fanuc M-710i robot is also included. General overhaul in 2014 TECHNICAL DATA Turning diameter: 370 mm Turning length: 1,000 mm Bar diameter: 62 mm Control unit: OSP-E 100 L Tailstock taper: MT5 C-axis: present Spindle and drive Spindle taper: A2-88 Dshxzsv Rbppouf Iout Spindle speed: 3,800 rpm Main motor: 22/15 kW Tool speed: 4,500 rpm Motor for driven tools: 3.7 kW Upper turret: 12 positions, driven Lower turret: fixed tools Fanuc robot Model: M-710i Control: R-J2 Year of manufacture: 1997 MACHINE DETAILS Dimensions (L x H x W): 3,900 x 2,050 x 1,950 mm Weight: 6,800 kg Connected load: 30.6 kVA EQUIPMENT - C-axis and two turrets - Various accessories included (see images) - Chuck included Connection cables between the robot and the machine are not included.

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 986003, grinding wheel speed: 6,000 rpm, tool diameter: 230 mm, travel distance X-axis: 325 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 470 mm, TECHNICAL DETAILS max. gear ratio: 10:1 Number of teeth: 3 - 200 Tooth height: 20 mm Duehxzjv Rcn Houf Iet Tooth width max.: 58 mm Control: SIN 840 D SIEMENS Axes X-axis: 325 mm Y-axis: 350 mm Z-axis: 470 mm B-axis: +90.1° / -1° Spindle Grinding spindle speeds: continuously variable up to 6,000 rpm Workpiece spindle speed: 1,200 rpm Tool Max. tool diameter: 230 mm Min. tool diameter: 69.85 mm Table diameter: 212.71 mm MACHINE DETAILS Total power requirement: 75 kW Machine weight: approx. 10,000 kg Space requirement: approx. 6.10 m x 4.40 m x 3.30 m Transport dimensions machine: 4 x 2.5 x 2.85 m / 11 t Transport dimensions water tank: 3.55 x 2.41 x 2.5 m / 1.8 t Transport dimensions cooler: 1.5 x 0.8 x 1.1 m / 0.2 t Transport dimensions sheet metal: 2.5 x 1.1 x 0.8 m/ 0.25 t EQUIPMENT - Coolant filter system Hoffmann HSF 100 V

Condition: good (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 101331, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 5,000 rpm, turning diameter: 140 mm, turning length: 630 mm, TECHNICAL DETAILS Max. turning diameter: 140 mm Chuck swing diameter: Ø 250 mm Turning height: 630 mm Control: SIN840 PL Spindle Spindle speeds: continuously variable 1 - 5,000 rpm Drive power (40% duty cycle): 38.00 kW Spindle head: according to DIN 55026 - size 6 Spindle diameter in the front bearing: 110 mm Axes X-axis travel: 300 mm X-axis feed: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min Dehxev Rcnmszuf Ieut X-axis feed force: 9,000 N Z-axis travel: 700 mm Z-axis feed: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Feed force Z-axis: 10,000 N Tool turret Number of tools in turret 1: 12 Number of tools in turret 2: 12 Tool holder: VDI 40 DIN 69880 MACHINE DETAILS Total power requirement: 70 kW Machine weight: approx. 25 t Space requirement (L x W x H): approx. 6.8 m x 4.7 m x 4.3 m EQUIPMENT - Chip conveyor - HYFRA spindle air conditioning unit - Knoll coolant system

Condition: good (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 4760, turning diameter over cross slide: 500 mm, feed length X-axis: 740 mm, feed length Z-axis: 450 mm, spindle bore: 130 mm, spindle speed (max.): 710 rpm, spindle speed (min.): 1 rpm, TECHNICAL DETAILS Spindle mount according to DIN 55027: size 15 Spindle bore: 130 mm Spindle diameter in the front bearing: 220 mm Main drive Drive power (100/60% ED): 38/46 kW Speed I: 1 - 250 rpm Max. torque: 6,000 Nm Performance data of the X-axis Travel path X: 740 mm Djhsv Rcl Sexzuf Iout Feed force: 14 kN Speed: 8 m/min Performance data of the Z-axis Travel path Z: 450 mm Feed force: 18 kN Speed: 8 m/min Working area Chest opening: 650 mm Swing diameter of the cheek opening: 1,400 mm Swing diameter of the face slide: 500 mm Turning tool cross-section: 32 mm x 32 mm Workpiece mass faceplate: 21 t Center of gravity distance: 250 mm MACHINE DETAILS Machine weight: 7.4 t Dimensions (L x W x H): 3.7 m x 2.5 m x 2.1 m Electrical data Voltage: 400 V Frequency: 50 Hz

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Dohxzov Rck Iouf Iout Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA