Screw air compressor

ALMIG Variable 90

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control Nedpfx Ajrb A Tcjkiolh quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, ABB Type: Robot IRB 340 / Controller IRC5 M2004 ABB Robot FlexPicker Delta4 IRB 340 with controller IRC5 M2004 Payload: 1 kg Positional accuracy: 0.1 mm Angular repeatability: 0.4 Working range (diameter): 1,130 mm Height: 250 mm Weight approx.: 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone. Written orders can be placed via email or fax. Nljdpfxsqzw Tts Akijh

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: D91402707010001/2013, overall weight: 1,500 kg, Electric motor for sale For description, see nameplate and pictures Sale only within EU member states! Not a private sale The MAE is available for inspection. We accept no liability for any warranty claims. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, Nodpfx Ajwittpjkiolh as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations.

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Nodpfx Akev Rmmmoijlh

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: API621725, For sale: Atlas COPCO ZR 132 compressor with filters, 125 KW Nodpfx Ajwrm T Iskiolh

Condition: used, Year of construction: 2016, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 3,000 bph List of machines Blow moulder| Kosme| KSB4RG 2016 | 3600 bph Air Transporters| NTS | 2016      Rinser - Filler - Capper| GyM | MONOBLOC 12/3 PVG| 1995|3000bph Caps Feeding Tolva| GyM | 1995      Handles feeder |TAS| VA-1150/75C | 2009 | 3000bph Handle applicator| And&OR | 50SIA5000R8P2-TL | 2009| 3000bph Labeller| Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4100bph Lot Coder| MACSA | K-1030PLUS| 2008      bottle spinner / rotator| GyM | 2001     Divider | SMI |  DIVIPACK 2000  |2002    Shrink Packer| SMI | LSK 30F | 2002 | 7200 bph (30 packs per minute 2*2 on 2,5L / 2 on 5L) Nljdpfx Akjtuyq Roioh

Condition: as good as new (ex-display), Year of construction: 2024, Capacity: 5.000 kN Specification: Threshold setting: Reading begins at 1% of capacity (50 kN) Resolution: 10 kN Inaccuracy: +/-0.5 % of Full Scale (F.S.) Nljdpfx Asfpwk Rekijh Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Overload: 150% of capacity (7.500 kN) Sampling rate: Three measurements per second Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Approx. 30 hours of continuous use Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 230 L x 190 W mm, height app. 180mm Height sets to 7.0000" +/- 0.0005" Weight: app. 32 kg inckuding carrying box with analog output

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Nodpfx Aezguumokiolh Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing Nedpfjxdr Rtsx Akiolh - Cutting head feed on double linear guideway - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display

Condition: excellent (used), ATLAS COPCO GA 110+ FF Screw Air Compressor ATLAS COPCO GA 110+ FF industrial screw air compressor, designed for the continuous and efficient production of compressed air in industrial facilities with high and constant demand. The GA series from Atlas Copco uses lubricated rotary screw technology, especially suitable for industrial applications where a reliable supply of compressed air is required for long operating periods. This unit corresponds to the FF (Full Feature) version, a configuration that integrates compressed air treatment within the unit itself, providing a compact solution for air generation and conditioning. MAIN FEATURES -Manufacturer: ATLAS COPCO -Model: GA 110+ FF -Type: Rotary screw air compressor -Configuration: Full Feature (FF) -Nominal power associated with the model: 110 kW -Continuous compressed air production -Lubricated rotary screw technology -Integrated cooling system -Air dryer integrated in the FF configuration -Condensate separation -Air filtration and treatment system -Electronic control via display / integrated controller -Monitoring of operating parameters -Complete, soundproof enclosure -Compact, packaged design -Robust construction for continuous industrial operation -Direct connection to compressed air networks -Access via panels for maintenance Nsdpfxjwnxzis Akiolh OPERATION Atmospheric air is drawn into the compressor and directed to the screw element, where two rotors progressively compress the air until it reaches the established working pressure. Subsequently, the necessary stages of oil separation, cooling, and air conditioning are carried out. In this GA 110+ FF version, the integrated dryer reduces the humidity present in the compressed air before it is fed into the factory network, eliminating the need to install a separate dryer in many configurations. The system can supply a general compressed air network intended for: -Pneumatic actuators and cylinders -Automatic valves -Filling and packaging equipment -Process machinery -Pneumatic transport systems -Instrumentation -Air-powered cleaning equipment -Automatic production lines APPLICATIONS Especially suitable for food processing plants, beverage factories, canning factories, packaging facilities, and other industries with a significant demand for compressed air. The combination of ATLAS COPCO, screw technology, 110 kW power, and Full Feature configuration provides a centralized solution for the supply of compressed air in industrial facilities. Machine available for inspection. Additional technical information, working pressure, flow rate, operating hours, dimensions, additional photographs, or videos can be provided upon request.