Separator

Alfa Laval BRPX714HGV-34C-50

Year of construction: 1997, condition: ready for operation (used), A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 , capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible. Todpfxexfvh Se Akijd

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Tsdpfxstk It Ss Akiod Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Year of construction: 2012, condition: excellent (used), Alfa Laval Centrifugal pump Type LKH 85/240, 25,0 kW , Stainless Steel. Used! Good condition! Inlet: 6" - Outlet: 6" Todpfx Ajhck S Eokisd

Condition: used, Cutter Manufacturer: Alpina Made of stainless steel Tsdpottwbgjfx Akied Volume: 200 liters

Condition: excellent (used), Rotary vane vacuum pump Manufacturer: Edwards Type: E1M275 Includes: Oil filling Todpfshmkcnox Akisd Condition: very good (The pump will be tested, cleaned, and serviced before delivery) Warranty: 3 months

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Tsdpfx Asw Ahg Rokiod Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Year of construction: 1999, condition: used, 3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system Brew size: 2000 l Length: 2600 mm Width: 5000 mm Height: 4500 mm Tedpsw U A T Iofx Akijd Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l Material: stainless steel / copper Base construction: Brewing vessels mounted on frame construction Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SF100s.01.26, screw diameter: 200 mm, total length: 3,200 mm, total height: 2,200 mm, overall weight: 400 kg, heating capacity: 10 kW (13.60 HP), pressure: 2 bar, type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, warranty duration: 24 months, Machine for cheese streching, dozing, mozarella and other. Tjdst I Dxwepfx Akiod

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, We offer the filler Veral 60, Producer Nate Chotebor. Tjdpfx Aetrv E Uekiod The machine is prepared for filling of the beer. Machine after general repair of all elements - filler, closer and pump. The machine is prepared for next types of bottles - 500 ,660, 750 and 1000 ml bottle. Filling capacity 20 000 bph of 500ml bottle.

Condition: used, Schließrahmen - Frame SBB Letter Press HeidelbergSBB - 560 x 820mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Tsdpfjrffm Nsx Akied Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test