Manual spindle press

AGEO SP16/410

Condition: good (used), Year of construction: 1987, Equipment: Gbodpfx Aoy S Syasfkon  Pressing force: 160 kN / 16 MPa  Spindle diameter: 60 mm  Spindle pitch per revolution: 32 mm  Clearance between columns: 410 mm  Max. clear height between table and ram: 270 mm  Table area: 410 x 280 mm  Weight: 335 kg Condition: good, little use

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Gsdpfow R Rt Isx Afkobn Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: used, Year of construction: 1960, pressure 10 t distance between columns 260 mm dayligth 210 mm Godpfswl N Saex Afkebn table surface area 275 x 260 mm

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press by Hiller & Lutz Year of manufacture: 1980 Fully functional In good used condition Technical details: The Hiller & Lutz HP71 is a classic, robust manual spindle press (also referred to as an arch press), widely used in metalworking shops, workshops, and industrial environments for straightening, bending, pressing-in, or punching operations. Here are the standard technical specifications for this model (values may vary slightly depending on year of manufacture): - Press force: approx. 20 to 25 tons (the "71" model number typically refers to frame size/width; actual force depends on spindle pitch and flywheel diameter) - Spindle diameter: approx. 70 – 80 mm - Stroke: approx. 200 – 300 mm (depending on spindle length) - Throat depth: approx. 250 – 300 mm (distance from spindle center to frame) - Table size: approx. 500 x 400 mm - Maximum opening height: approx. 400 – 500 mm (with spindle fully extended) Gbedpfx Afswxyn Ejken - Flywheel diameter: approx. 1,000 – 1,200 mm Machine features: - Design: Heavy-duty C-frame made of cast iron for high rigidity - Drive: Manual operation via large flywheel; energy is generated through the wheel’s inertia during operation - Table: Usually features a central through-hole and T-slots for tool mounting - Weight: Net weight typically ranges from 700 kg to 950 kg, ensuring stable setup (usually requires bolting to the foundation) Machine dimensions (main body): - Height: approx. 1,800 mm to 2,100 mm (depending on spindle position) - Width (frame): approx. 500 – 600 mm - Depth (base): approx. 800 – 1,000 mm Additional note: Dimensions depend on whether only the machine body or the total required space including flywheel overhang is considered.

Condition: used, Year of construction: 1970, pressure 1 t Gedpfx Aev Td Erjfkobn Stroke 315 mm

Condition: excellent (used), Espec Type: PHP - J3 Technical data: Air-cooled Temperature and humidity range Room temperature +10°C to +100°C / 40 to 98% rel. LF Temperature fluctuation ±0.3 K Humidity fluctuation ±2.5% Volume 398 liters Dimensions: Internal dimensions: Width 600 mm x height 830 mm x depth 800 mm External dimensions: Width 1010 mm x height 1690 mm x depth 1273 mm Mains voltage: 400 VAC 3∅ 50 Hz Maximum current 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climatic test chamber The following information is for your safety as a buyer! The following points are carried out on our chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Gbjdpfetzbzcjx Afksn Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 1963, functionality: fully functional, pressing force: 28 t, manual spindle press 28 tons in very good condition Gsdpfx Afoquqpajkjbn

Condition: excellent (used), Vötsch Type: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Internal Test Chamber Dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall Device Dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test Chamber Volume: 990 litres Temperature Testing: Minimum Temperature: -0°C Maximum Temperature: +90°C Temperature Change Rate, Cooling: 0.2 K/min Temperature Change Rate, Heating: 0.5 K/min Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Uniformity: ±0.5 to ±1.0 K Gbedpfoygut Rsx Afkjn Heat Compensation at +20 °C: 350 W Climatic Testing: Minimum Temperature: +10°C Maximum Temperature: +90°C Dew Point Temperature Range: +4°C to +89.5°C Humidity Range: 10 to 98% r.h. Temporal Humidity Deviation: ±1 to ±3% r.h. Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Uniformity: ±0.5 to ±1.0 K Voltage: 1/N/PE AC 230V ±10% 50Hz Rated Power: 2.3 kW Rated Current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg Important information for you as a buyer: The following measures are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: good (used), Year of construction: 1982, machine/vehicle number: 14899, Offer 26027 Godpfsy Icb Hsx Afkjbn Technical specifications: - Max. pressing force: 32 t - Max. ram stroke approx.: 250 mm - Max. installation height: 350 mm - Travel per handwheel revolution approx.: 48 mm - Upright spacing / throat clearance approx.: 575 mm - Table surface with 4 diagonal T-slots: 575 x 475 mm - Pressure plate area: 500 x 260 mm - Upper tool holder: 30 mm - Through-hole in table: 200 mm - Required space approx.: W + D 1000 / 1500 x H 2000 / 2400 mm - Weight approx.: 1000 kg

Condition: used, Year of construction: 1973, Column Spindle Press Ageo Type 60-960 Important Information: Gbsdpfx Afowtnigskon – The stated price applies only to self-collection. – Dismantling, loading, and transport are the sole responsibility and expense of the buyer. – Sale is from used stock, without guarantee or warranty. Inspection possible by appointment. I am happy to answer further questions.