Digital printing machine

Aeoon KYO AHP

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100810261, type of cooling: water, SHINOHARA 75 VP AMBIDEXTROUS (1+4 COLORS) CIP3. AUTOMATIC CHINCH PASS AUTOMATIC WASHING. UV LAMPS. WATER COOLER WITH AUTOMATIC ALCOHOL MIXING PH. AUTOMATIC METERS. WASHING ROLLER WINDER DISTRIBUTED WITH THE MACHINE. FLOOR FAN. 2 CALIBRATION DEVICES Bwsdpfx Ajtvmq Nofneh 20 SPARE CYLINDERS. PRINTING 4600000

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Bedpfxeww E Nre Afnjwh Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: excellent (used), Year of construction: 2002, 1) Bobst Dynaload prefeeder year 1998 2) Bobst Flexo 160 year 2002 n. 5 colors, Vacuum transport, rubber roller Bwjdpfx Aov Nywvjfnoh Bobst CUBE 3) Bobst SPO 160 A Matic year 2002 Introduction of suction cup Center Line II Stripping station with motorized Quick Lock tool clamping Batch delivery with gripper trim extraction Bobst CUBE 4) Castaldini Breaker year 2007

Condition: good (used), Year of construction: 2014, XEIKON 3050 including front end system Year of Manufacture: 2014 _____ Product Description:  Bar code modules  Xeikon PMS-Large  Rewinder XRN 500 single shaft, incl. Tension control  Maintained: Gold maintenance contract  Operating hours: very low estimated max. 300h  Condition: As good as new Machine Specifications and Equipment:  Print Process: Electrophotographic with LED array, dry toner, rotary printing with variable print length  Color Configuration: 5/0 simplex (CMYK and White)  Color Control: Integrated densitometer  Toner: Xeikon QA-I  Resolution: 1200 x 3600 dpi with 4-bit LED spot  Print Width: 508 mm (20.0 inches)  Print Length: Variable, 0-55 m (0-180 ft)  Substrate Feeding: Roll-fed; suitable for paper, paperboard, self-adhesive or pressure-sensitive labels (paper, PP, PET, vinyl, co-extruded film), transfer substrates  Substrate Width: 250-516 mm (9.8-20.3 inches)  Substrate Weight: 40 to 350 gsm (27 lb text to 122 lb cover)  Substrate Thickness: 40 to 550 μm (1.6 mil to 21.65 mil)  Web Alignment: Active, based on infrared and ultrasonic sensors  Print Speed: 9.6 m/min (31.5 ft/min) Bwodpfov Iqimex Afnjh _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: reconditioned (used), For Sale: EOS P100 – Ready for Immediate Use KNOW WHAT YOU BUY! Fully revised and with warranty! This EOS P100 has been fully inspected and revised, making it ready for immediate use in your production environment. Included in the package: • 2 build frames • Set of hoppers Specifications: • Technology: SLS (Selective Laser Sintering) • Material class: Polymers • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Build volume: 200 x 250 x 330 mm • Laser type: Synrad 48-3, 30W CO2 laser • Minimum wall thickness: 0.4 mm Consumables Highlight Bedpfx Aferm Tdwenswh We offer a wide range of plug-and-play materials, fully tested and optimized for use with EOS machines. Our Inframotion PA12 delivers top performance and provides significant cost savings compared to OEM powders, without compromising on quality. Choose our exclusive materials to drastically reduce your operational costs. Included Services: • Transport & Installation: Safe delivery in original EOS packaging and professional installation included. • Warranty & Maintenance Plans: Flexible options tailored to your specific needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we distinguish ourselves through extensive expertise and unique services. What we offer: • Expert maintenance: Installation, servicing, repairs, and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS machines. • Complete support: From transport to maintenance plans, we handle it all. Trust IM3D for reliable machines, superior materials, and the expertise to optimize your SLS production. Feel free to contact us for more information or inquiries!

Condition: used, The Weinig Unimat 23EL planer and moulder is designed for four-sided planing and profiling of wood, featuring a mobile spindle for automatic adjustment, a grooved bed for short and curved workpieces, and a long planing table. spindles: 10 spindle 1: Bottom / 5.5 kW / 40 mm spindle 2: Right / 11 kW / 40 mm spindle 3: Left / Motor together with spindle 2 / 40 mm spindle 4: Right / 11 kW / 40 mm spindle 5: Left / 5.5 kW / 40 mm spindle 6: Top / 11 kW / 40 mm spindle 7: Bottom / 11 kW / 40 mm spindle 8: Top / 7.5 kW / 40 mm spindle 9: Bottom / 7.5 kW / 40 mm Spindle 10: Universal / 4 kW / 40 mm working width: 230 mm Bwsdow H Iv Tjpfx Afneh working height: 160 mm feed: 5.5 kW / 6 - 36 m/min

Condition: excellent (used), mileage: 103,976 km, power: 375 kW (509.86 HP), first registration: 04/2021, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2021, operating hours: 1,280 h, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, retarder, soot filter, trailer coupling, = Additional options and accessories = - Aluminium fuel tank - Speed limiter - Alloy wheels - Air suspension - Particulate filter - Sun visor - Toolbox - PTO (Power Take-Off) - Central lubrication system - Towing jaw = Further Information = Axle configuration Brakes: Disc brakes Front axle: Tyre size: 385/65/22.5; Alloy wheels; Max. axle load: 9,000 kg; Steered; Suspension: Leaf spring Rear axle 1: Tyre size: 315/80/22.5; Twin tyres; Differential lock; Alloy wheels; Max. axle load: 13,000 kg; Suspension: Air suspension Rear axle 2: Tyre size: 315/80/22.5; Twin tyres; Differential lock; Alloy wheels; Max. axle load: 13,000 kg; Suspension: Air suspension Weights Unladen weight: 18,800 kg Payload: 14,200 kg Gross vehicle weight: 33,000 kg Functional Boom: Telescopic (8 sections) Boom length: 25.5 m Lifting capacity: 8,500 kg Lifting height: 2,550 cm Crane: PALFINGER PK 30.002 TEC7, year of manufacture 2020, mounted behind the cab Body manufacturer: PALFINGER PK 30.002 TEC7 CE marking: Yes Condition Technical condition: Very good Visual condition: Very good MERCEDES-BENZ AROCS 3351 6X4 TIPPER + PALFINGER PK30.002 TEC7 CRANE EURO 6 L PACKAGE 510 HP DRIVE 6X4 WHEELBASE 390 CM LEAF / AIR SUSPENSION DAY CAB WITH AIR CONDITIONING NAVIGATION AUTOMATIC TRANSMISSION RETARDER TOOLBOX TIPPER METAL FLOOR LENGTH 490 CM, ADDITIONAL EXTENSION UP TO 200 CM Bwjdpfx Afjwnqc Esnsh WIDTH 245 CM ALUMINIUM SIDE WALL 60CM TRAILER COUPLING PALFINGER PK30.002 TEC7 CRANE CRANE OPERATING HOURS 1,280 8X HYDRAULIC EXTENSIONS 4X OUTRIGGERS ADDITIONAL CRANE FUNCTIONS 5 AND 6 REMOTE CONTROL MAXIMUM WORKING HEIGHT 25.5 M MAX. LIFTING CAPACITY AT 4.4 M: 4,970 KG MAXIMUM LIFTING CAPACITY AT 22.0 M: 600 KG OIL COOLER FOR CRANE HYDRAULICS

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation Bwsdpfot E Nthox Afnjh ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations

Condition: like new (used), Year of construction: 2018, We offer You line Cabinplant with Multivac for snack packing. Production date of all machines year 2018. Line consisting af -Cabinplant 1 line elevator -Cabinplant 3 line elevator -Multihead weigher Cabinplant MHW 10 24 -Multihead weigher Cabinplant MHW 10 32 -KEN hygiene system EWD 50 -Platform with stairs -Cabinplant distribution tools 2 pcs Bodpfxjpxm Ugs Afnswh -Multivac R245 Type ASE 500, gas, vacum, without a vacum pump The set worked only during device tests, working for approximately 100 hours. The line was dismantled by the manufacturer's services: Cabinplant and Multivac.

Condition: used, Year of construction: 2014, CNC Machining Center Biesse skill 12 24 G FT Year of construction 2014 Machine no. 60961 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 2465 mm Y-axis 1260 mm Z axis 324 mm Disassembled for transport on normal trailer; 4500x2200x2400mm; Own weight 2000kg - Year: 2014 - Documentation available: Yes - CE certificate present: No - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 10 Bwedswnhanepfx Afneh - Tool changer positions [pcs.]: 12 - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Z-axis working range [mm]: 324 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets