Acrison dosing screw dosing unit feeder

Acrison

Condition: new, Meat grinder with mixer Manufacturer: Sind Model: S32A Dimensions: 800x700x1200 mm Giedpfop R Sbuox Amuet Electrical power: 3kW + 1.1kW Capacity: 800 - 1.000kg/h

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP Gedsvhctwopfx Amusit - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: like new (used), Year of construction: 2024, Equipment: type plate available, Volumetric dosing systems - granules, powders and ground material We offer a range of fully functional volumetric dosing systems that are ideal for conveying granules, powders and ground material. • Various models available: We have different dosing systems in stock that can be adapted depending on the material and application. • Testing option: On request, we will test the dosing devices with your material to ensure that they meet your requirements. • Reliable function: All systems are tested and ready for immediate use. Giodpfxjvmylzo Amujt Contact us and we will help you find the right doser for your requirements. We are happy to answer any questions or provide advice!

Condition: used, Year of construction: 2014, Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Filling section Gjdpfx Ajw Ag Ndemujit The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Capping section The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance.

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,000 kg, Discover the GEA-CFS SuperFry 5000/650 Fryer, an industrial fryer specifically engineered for continuous large-scale frying operations. Its stainless steel construction ensures robustness and durability, making it ideal for demanding food production environments. Thanks to its automated conveyor, it efficiently handles high volumes of food, ensuring uniform and precise cooking of products. Additionally, the SuperFry is equipped with advanced control and safety systems. It enables precise adjustment of conveyor speed, ranging from 1.2 to 15 m/min, and frying time, from 20 to 250 seconds. As a result, it offers exceptional flexibility to meet the specific requirements of any production process. Optimized sediment management and oil circulation contribute to superior finished product quality. Regarding technical specifications, the machine provides an output of 313 kW and operates at 3 x 400V, 50Hz. The minimum oil volume is approximately 1,009 liters with an oil level 2 cm above the conveyor. Weighing 4,000 kg, it is also equipped with electric lifters, a circulation pump, and a sediment removal system. Finally, a required amperage of 462A highlights its energy performance. The SuperFry 5000/650 is thus the ideal solution for companies seeking to optimize their frying processes while ensuring impeccable food quality and safety. Technical Specifications: Manufacturer: GEA-CFS Model: SuperFry 5000/650 All stainless steel Gjdpfx Asu Hhvfemueit Capacity: 3 x 400V, 50Hz Power: 313 kW Adjustable speed Minimum oil volume at 2 cm above conveyor: approx. 1,009 L Weight: 4,000 kg Amperage: 462A Frying time: 20-250 sec Conveyor speed: 1.2-15 m/min Equipped with electric lifters, circulation pump, sediment removal

Condition: used, Seydelmann Grinder Godpfx Asyip Etsmuoit -Type: AE130 -Power: 14/18 kW -Throat diameter: 130 mm -Dimensions: 1220 x 1050 x 1300 mm -Two-speeds for the working screw -Two-speeds for the feeder screw -Hopper capacity: 130 L -Weight: 800 kg -Set of knives and sieves -Made of stainless steel -Condition: used in very good condition, overhauled, ready to work

Condition: excellent (used), functionality: fully functional, KUVERTANLEGER Wahli Feeder . Gjdoupmzqspfx Amueit

Condition: good (used), K-Tron dosing machine, dosing screw, weighing filler, dosing unit Type: T-35 Incl. scale with control system and display (functionality unknown) See our other advertisements VMA Wekerom Godpfx Amowyf Iajueit

Condition: used, Dinnissen Dima 1200 bag emptying machine bag cutting machine stainless steel Machine has been overhauled. Equipped with new running wheels, bearings, clamps, etc. Capacity: 1200 bags/hour Completely made of stainless steel Drum motor power: 2x 1.5kW 124rpm Cutting rotor motor power: 2x 5.5kW 211rpm Gisdpfox D U Nlsx Amujt Cutting chamber with double rotor is mounted on top of the infeed hopper of the drum sieve See our other advertisements VMA Wekerom

Condition: excellent (used), Dinnissen sack discharge system, sack discharge station Semi-automatic machine All stainless steel Equipped with empty sack press Equipped with left-right distribution screw Gijdpjwygfyefx Amuot Equipped with DCE Donaldson dust extractor Neat, complete machine