Screw discharge conveyor

Aaltens Constructie Bedrijf LIN23020101

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Rodpfxsvf E Avo Ammeu Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: good (used), Driven and non-driven roller conveyor SSI Schäfer - Partially accumulating roller conveyors - Various lengths available and customizable to your individual warehouse project - Clear width: approx. 460 mm - Infeed and outfeed conveyors available - Roller conveyor curves available Large numbers of driven and non-driven roller conveyors in very good condition available. Please refer to the attached pictures for further information. The drawings represent the current state of construction, but this can of course be changed. We are happy to help you with transportation! Payment is made exclusively by: Rjdpfx Aegpw Rnommou - bank transfer - prepayment Prices are net prices (plus VAT) You will of course receive an invoice with VAT shown. Please also note our other advertisements. Didn't find what you were looking for? Do not hesitate to contact us.

Condition: ready for operation (used), Drum Screen Terra Select. 50 mm screen perforation Rsdpfxevnmcve Ammeu

Condition: new, Year of construction: 2026, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. Rjdpfst Iwt Ujx Ammsu reactions or questions ? please with full name, company name and phone number.

Condition: as good as new (ex-display), Year of construction: 2023, total length: 3,400 mm, total width: 1,300 mm, total height: 820 mm, overall weight: 565 kg, power: 2.2 kW (2.99 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO CB 3000 Conveyor Belt is a robust, 3-meter transport solution for construction, recycling, horticulture, and industrial applications. Perfect for moving sand, soil, gravel, compost, and other bulk materials, it delivers reliable, efficient, and continuous material handling. This particular unit was used only for demonstration purposes, showcasing its functionality and excellent condition. Key Features: • Adjustable belt speed, angle, and length for versatile use • Modular and extendable design for longer transport distances • Integrated hour counter for maintenance tracking • Simple belt tension and height adjustment • Durable, low-maintenance build for continuous operation Rsdsw N Imijpfx Ammju Tech Highlights: Speed 10 - 135 cm/s · Capacity 20 - 120 m³/h · Belt width 0.6 m · Hopper length 0.8 - 1.6 m · Hopper capacity 0.2 - 0.5 m³ · Drive power 400 V / 2.2 kW · Weight 565 kg · Width 1.3 m · Length 3.4 m · Height 0.82 m

Condition: good (used), Year of construction: 2007, 2 x KSB Pump ETANORM G 150-250 G10 Motor 1LG4183-4AA60 SN 02 - second-hand - : Rsdpfountlmox Ammsu Price per unit ex location: 5.750.-€ (net) Manufacturer: KSB Type: ETANORM G 150-250 G10 Serial number: 9971143054 000100 02 and 03 Year of construction: 2007 Q400.00m3/h H 14.00m n 1460 1/min Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Year of construction: 2011, condition: like new (used), functionality: fully functional, X-ray sorting machine. Rodpfx Amjyy A Uwomou Manufacturer: TITECH TOMRA Model: X-TRACT 1200 The machine is in PERFECT WORKING CONDITION. Complete overhaul of the machine carried out. Source replaced: €35,000 All sensors replaced: €29,000 Belt replaced: €10,000 Applications: - Sorting of brominated plastics in WEEE streams - Sorting of metals - Sorting of wood, glass, and PVC for SRF production - Sorting of organic waste

Condition: good (used), three-phase motor, electric motor -Power: 160 kW -Speed: 1485 rpm -Shaft: Ø 80 x 170 mm -Protection class: IP 55 -Type: B3 -Quantity: 1 piece available -Dimensions: 1230/880/H630 mm -Weight: 1015 kg Rodpfx Aeuicdtemmsu

Condition: good (used), Item: D-1903-Grundfos pump CR8-30 Water pump, Grundfos, used! Type P2-140 K Capacity 2.000 l, 90 m. Rsdpfxoirfbls Ammsu 1,1 kW

Condition: new, Bar Transferred Conveyor Systems These are conveyors which provide to be manually or automatically transferred among required processes until completion of the surface finishing and painting processes after the product to be painted is hung to the conveyor. Application of the processes can be carried out automatically based on the demand and the project. It provides a considerably high space and energy saving compared to continuous conveyor systems used in the facility where full automatic systems are operated. Based on the product weight, closed type Cardan and IPN rails can be used. • These conveyor systems, which have a wide range of carrying capacity, can move manually or semi-automatically vertically and horizontally, allowing the bar transport between processes. • This system provides higher efficiency in smaller installation spaces with low fuel consumption. • It works in the Power & Free conveyor logic, but is less costly and semi-automatic. Rsdpfxedy Ey Dj Ammou • It is easier to hang heavy items on the moving bar with the elevator unit that can be integrated into the system.