Used Ovens for sale (255)

Condition: good (used), 1 x Winward Engineering Low Level Depositor Model: Magnum Dceb Hcjwfta Ij Hlzeg Located in Melksham, Wiltshire

Condition: good (used), vacuum furnace, chamber furnace -Vacuum furnace: with vacuum pump Dobsif Sbie Hc Hlzscg -Chamber size: D500/W400/H400 mm -Thermostat: up to max. 320°C -Vacuum pump: power 1.1 kW -Total dimensions: 890/800/H1785 mm -Weight: 180 kg -Control: Two-point control using program control

Year of construction: 2012, operating hours: 75 h, Condition: like new (used), This Vötsch Hephaistos Industrial Microwave Chamber has had extremely low hours usage during its life so far, on 75 hours .. having been installed and minimally utilized from time to time for a single research project at the University of Sheffield AMRC research department known as the “Factory of the Future”. Sold new for a price of approx 250,000.00Euro. Contact us now for an exceptional offer for this high tech unit in as new condition. VHM Hephaistos Industrial Microwave Chamber For Aerospace and Automotive Engineering The Research Project The VHM Hephaistos Industrial Microwave Chamber for component testing was developed in cooperation with the Karlsruhe Institute of Technology (KIT). It is the result of a joint development project sponsored by the German Federal Ministry of Education and Research (BMBF). Alongside KIT, the Composite Research Center of EADS in Munich, the Institute for Aircraft Design (IFB) at the University of Stuttgart, GNK Aerospace in Munich and Vötsch Industrietechnik were involved in the project. Microwave system The VHM Hephaistos Industrial Microwave Chamber from Vötschtechnik is an internationally patented system. Fast and energy-efficient production processes are possible by using microwaves. The microwave chamber is characterized by its hexagonal geometry with a very high field homogeneity. This is a major advantage when thermoforming fibre composites (CFRPs) in the aerospace and automotive industries. During the targeted volumetric heating of the products, the microwaves directly enter the material so that energy is delivered directly and the chamber does not require heating. This increases the heating rate and throughput, saving energy and time in addition. Reduced production costs This industrial microwave chamber guarantees you reduced costs due to shorter heating, process and cooling times required for curing CFRP components. Its material processing technology means the microwave can produce energy input into the component to be heated while the oven itself remains cold. In comparison to the process in autoclaves, the processing times are reduced by up to 50 %. Energy consumptions is reduced by up to 70%. Advantages: Dceb Hc Hlstvz Rfszjg Possibility to use metal parts, such as conventional metal tools and feed systems, in the microwave field High degree of product quality thanks to the maximum homogeneity of the microwave fields provided by the hexagonal chamber structure. By using microwave absorbing materials, additional positive effects can be achieved Sizes from laboratory scale to large systems, e.g. as are required in the aerospace industry, can be achieved The modular design allows a flexible adjustment to your product Volumetric and selective heating for energy-efficient processes Precise heating of the products Hybrid systems, e.g. in combination with hot air

Condition: used, Chamber kiln has the following dimensions: Length 2800 Depth 1800 Height 3000 Max. 500° Dcob Hcowgkqaj Hlzeg Fully functional

Condition: used, Year of construction: 2016, Functionality: fully functional, Manufacturer: BHK-TEC Microwave Oven Type: MW50-2V Number of Magnetrons: 32 Voltage: 400 V 50/60 Hz Dcjb Hc Hlswhvcwezeg Connection: 70 kW Pre-fuse: 250 A Frequency: 2450 MHz Compressed Air: 6-10 bar Year of Manufacture: 2016 Emissions Sound Pressure: 80 dB Frequency: 50/60 Hz Exhaust Air: 2 x 8500 m³/h Intake Air: 4 x 3500 m³/h Intake Air Connection: 2 x 346 mm ø Exhaust Air Connection: 1 x 465 mm ø Dimensions and Weight Microwave Oven: (LxDxH) 3735 x 2373 x 4756 mm Min. Room Height: 5000 mm Usable Interior Space: (LxWxH) 3100 x 1200 x 1200 mm Max. permissible roller conveyor load capacity: 3000 kg Max. permissible total weight: 9000 kg Empty weight: 6000 kg Control cabinet: (LxDxH) 3800 x 520 x 2250 mm Weight: 700 kg

Condition: good (used), Functionality: fully functional, Temperature max: 300° Celcius Inner size LxWxH: 2.000 x 2.000 x 2.000 mm Heating: Hot Air Circulation Power: 75 kW County of origin: Germany Dcob Hc Hewc R Idslzog Outside dimensions LxBxH: 350 x 330 x 220 cm Weight: 2.000 kg

Condition: used, Year of construction: 2022, Manufacturer : France étuves Model : XXL12 Year : 2022 Dsbowchdce Hc Hlzocg Power : 53,3 KVA Max. temperature : 300°C Inside dimensions : 2000 x 3000 x 2000 mm Outside dimensions : 2559 x 3576 x 2798 mm Power supply : 400V ~3P 50Hz 80A Variable speed control for inside ventilation Viewing window on door Temperature cycle programmer Air extractor

Condition: good (used), Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace -Manufacturer: Nabertherm, hardening furnace type M110 -Program control: ROD Type SE-402 -Usable space: 200/320/H150 mm -Heating power: 2.9 kW -Nominal temperature: 1100°C Djb Hswg Rv Asc Hlzecg -Individual components: see photos -Dimensions: 740/580/H755 mm -Weight: 78 kg

Year of construction: 2002, Condition: used, power: 230 kW (312.71 HP), heating capacity: 225 kW (305.91 HP), temperature: 1,000 °C, usable height: 50 mm, usable length: 5,750 mm, usable width: 650 mm, CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. operation modus: continuous .. heating method: gas+electric .. Heating capacity: 225 kW .. temperature max.: 1000 °C HEAT TREATMENT COMPARTMENT / ZONE .. length: 5750 mm .. width: 650 mm .. Height: 50 mm ELECTRICAL SPECIFICATIONS .. total power consumption: 230 kW .. mains voltage: 400 V .. mains frequency: 50 Hz Application: Production of friction linings for clutches Sintering of steel, copper and brass powder materials onto non-ferrous metal/steel sheet Dcsb Hcswhkd Ne Hlzeg Cooling in an oxidation-free atmosphere Complete system with powder application, furnace, cooling section, cleaning Design: Continuous furnace with belt conveyor with heating and cooling section Natural gas and electric heating Heating temperature contro zones 6 Fuel gas (natural gas) approx. 5 Nm3/h Purge gas N2 approx. 30 Nm3/h Process gas H2/N2 60/40% approx. 40 Nm3/h Electrical heating Zone 1: 2 x 27.5 kW Zone 2: 2 x 27.5 kW Zone 3: 2 x 27.5 kW Zone 4: 55 kW Zone 5: 5 kW

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 11434, Used TRUS/S recirculating air oven Manufacturer Keller, Ihne & Tesch Little used, very good condition 2 chambers each 800 x 1,600 x 1,600 mm (W x D x H) Operating temperature: up to 70°C Heating output: 18 kW Recirculating air fans: 4 x 1.1 kW Air flow: horizontal Dryer consisting of two separately controllable chambers, arranged side by side Four-channel temperature control with four electronic overtemperature protection controllers Six-channel graphic recorder for interior temperature and product temperature (handheld sensor) documents the drying process Power switching: solid-state relay Dcob Hcswdkknj Hlzsg Ventilated panels on the interior side wall for subsequent optimization of temperature tolerance 60 mm insulation reduces heat loss The oven originates from a company liquidation and is immediately available from the Merenberg warehouse.

Year of construction: 2007, Condition: used, EFD INDUCTION BJ.2007 Dcjbowd Rvwo Hc Hlzsg

Year of construction: 2001, Condition: used, Functionality: fully functional, Industrie- & Anlagenbau - Bad Königshofen Continuous plant / Hardening furnace → Consisting of the process stages: Hardening, post-treatment and temperingYear of construction: 2001General: 2001-2023 production-accompanying exchange of wear ilability over the year 90Control system: S5Current plant technology: Pusher-type furnace (made of cast steel)Output during quenching and tempering max. 300 kg/h Output during carbonitriding max. 100 kg /hThe plant consists of the 7 main components: Continuous annealing furnace, quenching bath, oil storage tank, de-oiling and washing station; manipulator, continuous tempering furnace, control cabinet / ctionality of the continuous annealing line: - the plant is capable of quenching and tempering and carbonitriding on oil bath basis- process temperatures up to 930°C- Base or safety gas: (for O2 closure) nitrogen/methanol (as carbon donor) is used- process gas: natural gas or ammonia but convertible to propane- the curing area is heated with natural gas- the tempering furnace is powered by electricity- the round wire link belt has a width of 765mm (1.4864 Nb)1. continuous annealing furnace: - Model: DOBGS 7.5 1 50-10-0 (intermittently conveying, protective gas-tight outer shell, indirectly heated with recu - radiant tube burners.- Outer dimensions: Continuous furnace L x W x H = 7.85 x 2.10 x 2.25 m → annealing zone length 5.0 m; conveyor belt width: 765 mm.- Temperature: max. 980 °C +/- 5 K- Total heating power: 210 kW - by means of 14 Noxmat - steel tube burners manufacturer ALD with a radiant tube diameter of 150 mm.- temperature control zones: 3 heating and control zones (i.e. zone1 - 6 x 15 = 90 kW; zone2 - 4 x 15 = 60 kW; zone3 - 4 x 15 = 60 kW)- Protective gas supply / control: 3 x each nitrogen, methanol, natural gas, ammonia air- Throughput speed: adjustable via frequency converter 2 to 7 m/h- Furnace time: approx. 75 min at 4m/h; adjustable from 38 to 135 min; holding time 50 min at 4m /h- Transport equipment: Round wire link belt made of 1.4864 with 18 mm lamellar edge- Inert gas consumption: inert gas: nitrogen approx. 3 m3/h; methanol 3 l/h, natural gas 500-2000 l/h, ammonia 200-300 l/h, air 500 l/h- Lining: is lined with fireclay, ceiling with thermal insulation wool, condition: in need of repair- Electrical connected load approx. 10 kW - Total weight approx. 15.800 kg2. quenching bath model KAB 11,1: - suitable for quenching with oil- Structure: electrically driven circular conveyor, level difference detector, lifting platform, basket turning device, bath heating, bath circulation, water cooling and draining station.- External dimensions: L x W x H = 2.80 x 2.50 x 2.00 [m]; drop height in quenching oil = 1.0 [m]. - Total weight with oil: approx. 16,000 [kg].- Connected load heating: 48 kW- oil cooler HK4 - make Hering 2 x 2,2 kW- incl. level - difference detector model NDM 100-03. oil reservoir model B12,5: - Suitable for holding the oil from the quenching bath with pump and support frame for centrifuge system.- External dimensions: L x W x H = 4.20 x 2.50 x 1.55 m; max. filling height 1.40 m; max. volume 12.88 m34. de-oiling and washing station: - consisting of 1x centrifuge AZ 500 manufacturer WMV, 1 x washing machine WA 500, 1 x centrifuge AZ 500 H for drying. - 8 cylindrical transport containers according to drawing 300 /864 /96 - drum height 500mm- connected load: ca 15 kW5. manipulator model MBM 63/1 - (500): - consisting of a mechanical cross s Djb Hep Ecn Aoc Hlzecg

Year of construction: 1985, Condition: used, Hardening furnace Heraeus Type KM 260 width 250 mm height 150 mm depth 500 mm Temperature up to 1150 c Dceb Hsgtxuqjc Hlzog

Year of construction: 1988, Condition: good (used), Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace -Manufacturer: Nabertherm, hardening furnace type N60/H -Program control: STANGE type SE-402 -Usable space: 400/420/H390 mm Dceb Hcovrivas Hlzsg -Heating power: 10 kW -Nominal temperature: 1340°C -Individual components: see photos -Transport dimensions: 950/1070/H860 mm -Weight: 290 kg

Year of construction: 2009, Condition: used, controller manufacturer: SIEMENS, controller model: S7 300, temperature: 1,140 °C, usable height: 15 mm, usable length: 3,636 mm, usable width: 300 mm, CONTROLS .. PLC SIEMENS S7 300 CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. temperature max.: 1140 °C HEAT TREATMENT COMPARTMENT / ZONE .. length: 3636 mm .. width: 300 mm .. Height: 15 mm ELECTRICAL SPECIFICATIONS .. mains power supply: 173 kVA Application: Production of friction linings for clutches Sintering of steel, copper and brass powder materials onto non-ferrous metal/steel sheet Deb Hcewhkdvj Hlzecg Cooling in an oxidation-free atmosphere Use for small series or pilot plant Design: Continuous furnace with belt conveyor with heating and cooling section Fuel gas: Natural gas Forming gas: H2, N2 Inert/protective gases: N2, argon

Year of construction: 1987, Condition: good (used), machine/vehicle number: 4695, OFFER 20330 Technical data: Dcjb Hc Hjgvpkvjlzeg - Nominal / continuous temperature preselectable up to approx. 1150 °. - digital temperature setting - timer - interior dimensions approx. W 250 x H 190 x D 400 mm - Charging through front door - Opening width of front door W 240 x H 190 mm - drive 400 V / 7,5 kW - Underframe H 800 mm - Space requirement approx. W 900 x H 1450 x D 1100 mm - Weight approx. 120 kg

Condition: refurbished (used), Refurbished vacuum furnace Schmetz IU140/3F 2R Usable dimensions (W x H x D): 600 x 600 x 900 mm Charge: max. 600 kg gross Temperature: max. 1350°C Heating power: 140 kW Dcjb Hc Howcw Ukslzsg Heating elements material: graphite Ultimate vacuum: 1 x 10-3 mbar Operating vacuum: 5 x 10-2 mbar Partial pressure Nitrogen/Argon: 0,1 ÷ 10 mbar Leak rate: 5 x 10-2 mbar / sec Quenching pressure: max. 6 bar abs / approx. 5,6 m3 Mechanical Pump: 560m3/h - Leybold SV200 Booster Pump: 1200m3/h – Edwards EH 1200 PLC: Siemens Controller: Demig

Year of construction: 2018, Condition: ready for operation (used), A rail hardening furnace for the production of shears is available. Working length: 3400mm, heating zones: 2, heating power: 34kW, useful space separation: SiC plates, temperature-controlled zones: 2, conveying direction: free, machine dimensions X/Y/Z: approx. 4000mm/1250mm/2100mm. Including automatic conveyor system and separate blower. Documentation available. On-site inspection is possible. Dcobewftcij Hc Hlzeg

Year of construction: 1989, Condition: good (used), Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace -Manufacturer: Nabertherm, hardening furnace type N300/S -Program control: STANGE type SE-402 -Usable space: 560/715/H790 mm -Heating output: 18 kW -Nominal temperature: 1280°C -Individual components: see photos -Transport dimensions: 1200/1350/H1930 mm -Weight: 604 kg Deb Hovivvnjc Hlzscg

Year of construction: 2017, Condition: used, controller manufacturer: SIEMENS, controller model: S7-1500, pipe diameter: 50 mm, pipe length: 1,200 mm, wall thickness: 6 mm, CONTROLS .. PLC SIEMENS S7-1500 FEEDSTOCK TUBE .. external diameter min.: 15 mm .. external diameter max.: 50 mm .. wall thickness min.: 1.8 mm .. wall thickness max.: 6 mm .. length min.: 200 mm .. lenght max.: 1200 mm Debourckgj Hc Hlzscg System consists of: + ITG ITPA 100k150 vertical induction hardening system, YoM 2017 150 kW, 100 kHz + BACHMANN automation cell, YoM 2017 + 2x ABB IRB 4600 handling robots, YoM 2017 load capacity 60 kg, additional arm load 20 kg, reach 2.05 m

Condition: good (used), Drying oven, drying cabinet, electrode re-drying, electrode cabinet, electrode dryer -Manufacturer: Meyer, drying oven type ES 2 -Power: 0.2 kW -max temperature 110 °C -Voltage: 110 V -Usable space: Ø 100 x 430 mm / 2 packages of electrodes -Number: 18x dryers available -Price: per piece Dcobowbdilj Hc Hlzog -Dimensions: 170/170/H565 mm -Weight: 7.8 kg/piece

Year of construction: 2017, Condition: good (used), Endogas generator (endothermic protective or reaction gas) Generation capacity 24 - 60 m3/h H2/CO/N2 mixture Dcsb Hcev Nakio Hlzeg Operating temperature 1000 °C Regeneration temperature 870 °C Electrical heating Gas consumption (input) Natural gas 13.8 m3/h Propane 9.6 kg/h Nitrogen 2 m3/h Electrical connection 27 kVA IPSEN EndoSave control system

Condition: good (used), Drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet, universal oven -Manufacturer: Heraeus, drying cabinet universal oven type T 6120 with viewing window -Useful space: BTH 550/370/495 mm / 100 liters -Heating power: 2.2 kW -Nominal temperature: 300°C Dcob Hc Hswbc U Hslzog -Voltage: 230 V -Individual components: digital temperature controller, adjustable ventilation flap -Dimensions: 940/585/H720 mm -Weight: 72 kg

Condition: good (used), Drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet, universal oven -Manufacturer: Memmert, drying oven universal oven type UM 200 -Useful space: BTH 400/250/320 mm / 32 liters -Heating power: 1.1 kW -Rated temperature: 30°C to 220°C -Dimensions: 550/435/H600 mm Dcob Hc Hewbc Rujlzsg -Weight: 28 kg

Condition: good (used), Drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet, universal oven Dcjb Hc Hjwayuuelzjg -Manufacturer: Memmert, drying oven universal oven type ULP 800 on castors -Useful space: BTH 1040/600/1200 mm / 749 liters -Heating output: 4.8 kW -Rated temperature: 30°C to 220°C -Individual components: see photos -Dimensions: 1190/790/H1620 mm -Weight: 170 kg