Used press brakes with 200-299t bending force for sale (178)

Condition: good (used), functionality: fully functional, Year of construction: 1999, Press force: 225 t Bending length: 4050 mm Frame width: 3550 mm Djdpfezd Sqyex Ab Ascp Control system: CYBELEC DNC 86 PS Total power consumption: 18.5 kW Machine weight (approx.): 18,000 kg Space requirement (approx.): 5180x2400x3200 mm Equipment: - CNC control system Cybelec - Pneumatic upper and lower tool clamping - Die shifting - Light curtain on the machine - 2 support arms in front of the machine - Controlled axes y1, y2, x, r, z1, z2 - Compensation - 2-hand foot control - Side protective doors

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Djdpfxoya Iaqs Ab Aecp Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Year of construction: 2024, condition: new, Here is a new AD-R 37220 being offered: Bending force: 220 tons Bending length: 3700 Distance between stands: 3100 mm Stroke: 265 mm Installed height: 530 mm Overhang: 410 mm Table height: 900 mm Table width: 104 mm Y-axis rapid traverse: 160 mm/s Dodpfod S I R Tex Ab Aecp Y-axis working speed: 10 mm/s Y-axis retraction speed: 120 mm/s X-axis working speed: 250 mm/s R-axis working speed (manual): 250 mm/s R-axis travel: 250 mm/s X-axis distance: 650 Length: 4950 mm Width: 1770 Height: 2900 Total weight: 14100 kg Options: CE with manual F.AKAS II M -FPSC-B-C + safety guard & switch R-axis X=650mm X,R (AL) European upper tool P97.75.R08 (one of them is a split die) European lower tool M.460R.85 (one of them is a split die) Quick clamping system CNC-controlled motorized crowning Y1, Y2, X, R (4-axis) X=650mm X,R Control unit - CNC DT-15 Graphical control unit S European clamping system S 60mm die holder (only for European dies) S Overhang 410 410 mm Rear gauge: motorized & linear guide & ball screw system Rear gauge finger, height-adjustable Rear gauge motor: AC type Adjustable support arms with linear guide over the entire length The machine can be inspected and demonstrated at any time in our demonstration center in Staufenberg by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Year of construction: 2024, condition: as good as new (ex-display), Bending force: 2200 KN Bending length: 3050 mm Distance between columns (mm): 2600 mm Stroke length (mm): 265 mm Overhang: 410 mm Installation height: 530 mm Operating speed Y (mm/sec): 10 mm/sec Motor power: 18.5 KW Operating speed X (mm/sec): 500 mm/sec Operating distance R (motorized): 350 mm Length: 4250 mm Width: 1700 mm Height: 2750 mm H7s8pkvti Weight: 11500 kg Standard equipment: Y1, Y2, pressure beam – axes (individually controllable) X and R axes CNC controlled. Control unit – ModEva 19T Servo motor for back gauge & linear ball screw system (X-R) (AL) CNC controlled crowning European tool clamping system Adjustable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standards Electrical equipment according to worldwide standards Dcodpfod R Elcjx Ab Ajp Optional accessories: Bending upper tool H=66.5 (one of them split) Bending lower tool 4V die (one of them split) D-Bend 3D CAD/CAM import & simulation program The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Vsiqjq Further machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: used, Year of construction: 2002, Pressure 250 t Bending length 3550 mm Frame width 3000 mm Control Cybelec DNC 1200 Machine weight approx. 18,500 kg Space requirement approx. 4300x2750x3750 mm Accessories: - 2-hand foot switch - Lasersafe Fisseler - Hydraulic tool clamping top and bottom - Die shifting - Hydraulic crowning - Support arms - Control Cybelec DNC 1200 - 1 set of upper and lower tools - Controlled axes y1, y2, x, r, z1, z2, back gauge tilt - Safety guard Dcjdpfswn Ebiex Ab Aep

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 17650001, working width: 3,100 mm, stroke length: 400 mm, throat depth: 250 mm, power: 34 kW (46.23 HP), pressing force: 250 t, TECHNICAL DETAILS Number of axes: 8 Press force: 250 t Dodpfjzk Dv Iex Ab Aocp Max. working width: 3,100 mm Frame spacing: 3,200 mm Overhang: 250 mm Rear gauge depth: 750 mm Max. stroke: 400 mm MACHINE DETAILS Control system: Bystronic ByVision Power: 34.0 kW Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,390 x 3,340 mm Weight: 20,500 kg Transport packages: 3 EQUIPMENT Crowning system: CNC-controlled Ram holder: Hydraulic Tool holder type: WILA standard Tools included Documentation CE marking and certificate Additional finger stop Stroke assistance Finger protection Offline software

Condition: ready for operation (used), Year of construction: 1999, controller manufacturer: DELEM, number of axes: 4, pressing force: 235 t, This 6s TRUMPF TrumaBend V230 was manufactured in 1999. It features a press force of 230 tons and a work length of 3000 mm. The machine includes a back gauge with 4 axes for enhanced precision. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V230 press brake we have for sale. Contact us for further details. Dedpfx Aezcm I Ejb Aecp Technical Specification Bending Length 3000 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, Pressure: 225 t Bending length: 4050 mm Control: DA 69 TW Oil capacity: 400 l Total power requirement: 17 kW Dcsdpfjyz S Ngox Ab Aep Machine weight approx.: 18,100 kg Dimensions: 5700 x 2610 x 3300 mm

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-66T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 410 mm - Max stroke: 310 mm - Daylight: 465 mm - Distance between side frames: 2600 mm - Max backgauge distance: 1000 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2975 mm - Weight: 8850.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - by automatically controlling 8 axes, bending is more efficient - can store 500 programmes consisting of 25 steps and 99 repetitions each - up to 30 lower and upper dies can be stored in the memory - controller with 2D/3D programming mode - 17″ TFT touch screen - Windows with driver software (possibility to create programmes using the external computer) - control of bending compensation from the controller - comprehensive design of the Delem controller - USB with possibility to connect devices - space for connecting a bending angle sensor Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Manufactured in Turkey Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new Dcjdpsrp Dt Tefx Ab Aop - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, controller manufacturer: Cybelec, controller model: VisiTouch 19, bending force (max.): 200 t, working width: 3,100 mm, stroke length: 260 mm, throat depth: 410 mm, distance between stands: 2,550 mm, Baykal APHS PRO 31200 CNC Press Brake The Baykal APHS PRO 31200 is a CNC-controlled press brake constructed with an all-steel welded frame. The machine features HAWE hydraulics, Fiessler laser safety system (AKAS / LCII), as well as a CNC-controlled crowning system, and is operated via a Cybelec Visitouch 19MX 3D control unit. Technical Specifications: Pressing force: 200 t Bending length: 3100 mm Bending length between frames: 2550 mm Throat depth: 410 mm Table height: 880 mm Max. ram stroke: 260 mm Motor power: 18.5 kW Oil tank capacity: 210 l The 5-axis backgauge (X + R + Z1 + Z2 + X5) enables precise positioning. The positioning accuracy is ±0.03 mm, and the travel speed along the X-axis is 330 mm/s. Control System: The Cybelec Visitouch 19MX offers intuitive operation via a 19" touchscreen with 3D visualization and simulation. Parts can be imported as DXF flat patterns or 3D files. Features such as automatic bending sequencing, backgauge positioning, and tool setup assist with programming complex parts. Equipment: - Fiessler AKAS / LCII laser safety system - Automatic motorized table crowning (WILA system) - Manual quick-release clamping, Promecam / AMADA style - 2 front sheet supports, laterally adjustable - Centralized lubrication - Hour meter - CE compliance Machine Data: Year of manufacture: 10/2025 Serial number: 31880 Weight: 11,500 kg Dimensions (L×W×H): 3820 × 1800 × 2700 mm Dsdpfsyrgcnsx Ab Ascp The machine is in stock and available for immediate delivery. The warranty is 12 months for single-shift operation.

Condition: used, Year of construction: 1980, pressure 200 t chamfer lenght 3000 mm distance between columns 2560 mm dayligth 450 mm throat 450 mm adjustment of stroke 240 mm horn length over column outer edge each 175 mm table length 3050 mm table width 280 mm table height over floor 820 mm electrics - voltage/frequency 220/50 V/Hz control CYBELEC, DNC60 stroke 250 mm Dsdpfxjt Hllpo Ab Ajcp operating pressure 150 bar weight of the machine ca. 15 t dimensions of the machine ca. L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC 60 • lower part of the machine moves down 500 mm to the floor, • at the moment the machine is mounted on a double-T-support; • prism and upper part of the machine in 3000 mm length

Condition: used, Year of construction: 1999, pressure 200 t chamfer lenght 4100 mm Control CYBELEC DNC 900 stroke 260 mm Dodpjy H N Iwsfx Ab Aecp weight of the machine ca. 16.000 kg dimensions of the machine ca. 4500x2400x3000 mm

Condition: new, pressure: 200bending length: 3200column width: 2700daylight: 400stroke lenght (max.): 200column throat depth: 350messurements (LxWxH): 37000 x 1700 x 2700weight approx.: 14.000 Dcjdetvhxiepfx Ab Aop

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm throat 300mm Weight approx. 23,000kg Dcsdeuhf Tzjpfx Ab Aop The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dcodjz Hwhmopfx Ab Aop Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T

Condition: good (used), functionality: fully functional, Year of construction: 1992, Pressure: 200 t Bending length: 3050 mm Distance between uprights: 2550 mm Ram stroke: 274 mm Control: Cybelec ModEva Pac Djdexb Sugepfx Ab Ajcp Approx. machine weight: 17,000 kg Accessories/Equipment: - Control conversion to Cybelec ModEva Pac - 2 bending aids in front of the machine - Fiessler light curtain in front of the machine - Foot switch

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4020-CNC Delem DA-58T Specifications - Nominal pressure: 2000 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1800 mm - Height: 2800 mm - Weight: 13700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller Djdpfxjtizayj Ab Aocp - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC Delem DA-58T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm Dedpstizavsfx Ab Ascp - Height: 2600 mm - Weight: 10700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: ready for operation (used), Year of construction: 2000, operating hours: 59,827 h, overall weight: 16,600 kg, pressing force: 204 t, This HAMMERLE BM 200 - 3100 press brake was manufactured in 2000. It is a robust and reliable machine, ideal for bending applications. Consider the opportunity to buy this HAMMERLE BM 200 - 3100 press brake. Contact us for more information. Machine Benefits Qualitative Machine Benefits • The machine has a pressing force of 200 tons over a length of 3 m, which can bend a sheet thickness of up to 20 mm. However, this is all tool dependent. Right now tools for a thickness of up to 8 mm are used Dsdpfxjx D Ni Tj Ab Aecp Technical Machine Benefits • Max. Working length: 3100 mm • Max. Stroke: 400 mm • Projection: 250 mm • Operating voltage/frequency: 400v 50hz • Control voltage: 24v dc • Connected load main motor: 22 kw • Total connected load: 32 kw • Rated current of back-up fuse: 80 a Extra Information Machine still under power

Condition: new, Year of construction: 2024, operating hours: 32 h, Manufacturer: DURMA Model: AD-S 30135 Year of manufacture: 2018 Bending length: 3050 mm Dcjdpjdx Rd Nefx Ab Aop Press force: 1350 kN Control system: CNC DT-15 Operating hours: 0 h Controlled 3 axes: Y1, Y2, X Distance between uprights: 2600 mm Stroke length: 265 mm Installed height: 530 mm Table width: 104 mm Table height: 900 mm Upright overhang: 410 mm Travel range of the X-axis: 650 mm (double guide, aluminum) Travel speed of the X-axis: 250 mm/s Approach speed: 160 mm/s Bending speed: 10 mm/s Retraction speed: 120 mm/s Dimensions L/W/H: approx. 4200x1680x2750 mm Weight: approx. 10250 kg Standard equipment Y1, Y2, X = 650 mm Control system: CNC DT-15 Manual crowning European tool clamping system 60 mm die holders (only for European die system) 2 front-movable support arms with linear guide over the entire length Back gauge: motorized with linear guide & ball screw Back gauge finger height-adjustable, R-axis manual Back gauge motor: servo Safety guards on the sides CE marking Extended equipment CE safety system with manual FIESSLER AKAS II M-FPSC-B-C + safety guard & switch The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by prior appointment. Other machines are available for demonstration in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: used, total length: 40 mm, total width: 2,800 mm, total height: 2,690 mm, Year of manufacture: 2002 Colour: White Weight: 11.490 kg Price: On request - Year: 2002 - Serial number: 7061992647 - Drive system: Conventional - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 200 - Max. working width [mm]: 3000 - Column gap [mm]: 2300 - Throat depth [mm]: 700 - Backgauge depth [mm]: 700 - Crowning system: None - Tools included: Yes Dsdpfxsz Dh S Dj Ab Aocp - Options: Digital readout - Transport dimensions: 40mm x 2800mm x 2690mm (l x w x h) - Transport weight [kg]: 11490kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Item No. 22621 Technical Data: Dcodpfoip Nikox Ab Asp - Max. working length 3500 mm - Distance between columns 3050 mm - Max. pressing force 2000 kN - Distance table / ram max. 480 mm - Column overhang 260 mm - Ram stroke approx. 300 mm - Stroke speeds - Downward speed, no load max. 100 mm/sec - Upward speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg - including: - CNC control CYBELEC, renewed in 2008 - Controlled crowning device - Controlled rear backstop with height adjustment 5 - 1000 mm - Hydraulic tool clamping - Upper tool + universal die set - Material supports - Two-hand control panel

Year of construction: 2017, operating hours: 80 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: B3070, little used press brake TECHNICAL DETAILS pressing force: 290 t working length: 3100 mm distance between columns: 2550 mm working height: 400 mm Opening width: 515 mm Control system: Cybelec DNC 60 stroke: 250 mm table width: 80 - 220 mm speed: 0 - 150 mm/s pressing speed: 0 - 10 mm/s reset speed: 0 - 120 mm/s MACHINE DETAILS Dcjdsmidm Tjpfx Ab Ajp hydraulic pressure: 275 bar Machine power: 18,5 kW machine length: 4900 mm Machine width: 1935 mm Machine height: 2890 mm Machine weight: 20.500 kg EQUIPMENT - 1 x tool 30, 5 x 104 mm, 1000 kN/m - 3 x tool 30, 5 x 104 mm, 1000 kN/m - 1 x tool 88, 3 x 103.5 mm, 500 kN/m - 3 x tool 88, 3 x 103.5 mm, 500 kN/m - 1 x Matrix 85, V 80 mm, H 80 mm, W 95 mm - 3 x Matrix 85, 5 x 104 mm, 1000 kN/m - 1 x Matrix 85, V 40 mm, H 60 mm, W 60 mm - 3 x Matrix 85, V 40 mm, H 60 mm, W 60 mm - 1 x Matrix 88, 16 x 120 mm, 1000 kN/m - 3 x Matrix 88, 16 x 120 mm, 1000 kN/m

Condition: used, total length: 3,400 mm, total width: 1,800 mm, total height: 2,600 mm, Year of manufacture: 1994 Colour: Grey Weight: 10.400 kg Price: On request - Year: 1994 - Serial number: 1776 - Drive system: Conventional - Power [kW]: 22.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 220 - Max. working width [mm]: 3050 Dcjdoybdtcepfx Ab Aep - Column gap [mm]: 2620 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 240 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Transport dimensions: 3400mm x 1800mm x 2600mm (l x w x h) - Transport weight [kg]: 10400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Comparable with Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 320 t (also available in many other configurations!) Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Y-axis stroke 400 mm Open height 650 mm Throat depth 450 mm Clear gap between frames 2555 mm Machine length 3785 mm Machine width 2290 mm Width without support arms 1740 mm Overall height 3100 mm Table height 920 mm Motor power 22 kW Oil tank capacity 300 l Machine weight 14,450 kg (Specifications may vary depending on equipment) Dsdouf Nr Ajpfx Ab Aecp Standard equipment: 3 CNC axes (Y1, Y2, X) Press beam double-guided, stable and precise Robust double-guided backgauge Backgauge fingers double-guided on linear rails Movable front arms with height adjustment Side and rear safety guards 60mm lower die adapter rail Manual upper tool clamping system (Promecam system) Foot switch with emergency stop 380 V, 50-60 Hz, 3 phase LED lighting Additional equipment: Delem DA 66t CNC control R-axis (backgauge) CNC controlled CNC-controlled crowning Fiessler Akas 2M laser safety device 2 additional backgauge fingers (total 4) 1 set of top and bottom tooling - Further processing lengths and capacities available upon request with appropriate accessories! -