Used press brakes with 150-199t bending force for sale (169)

Condition: new, pressure: 160bending length: 3200column width: 2655daylight: 400motor: 11slide stroke - max.: 200repeat accuracy: 0,015precision of position: 0,10CNC Press Brake 3200 mm x 160 t Standard Equipment:Sturdy construction for high stability and precision. CNC Axes: Y1, Y2, X, and R axes for precise control and accurate bending operations. Motorized CNC crowning device with CNC control for precise adjustments. CNC control system from the manufacturer (similar to Delem) for user-friendly operation and high flexibility. Back gauge with linear guide and ball screw, equipped with 4 back gauge fingers for precise material positioning. 2 sheet metal support arms for ergonomic handling of the material. Laser protection device on the upper beam to ensure safety during operation. Fpsdpfx Ajv S Npyjg Iel Quick clamping for upper tooling for fast and easy tool change. Upper tooling system: Promecam Amada, split and offset for maximum flexibility. Multi V die system: Both Promecam and Amada systems are compatible. CE safety equipment to comply with all relevant safety regulations.

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 6430025, functionality: fully functional, stroke length: 215 mm, overall weight: 10,000 kg, controller model: Cybelec ModEva 12 CNC, bending force (max.): 150 t, working length: 3,100 mm, TECHNICAL DETAILS Working length: 3,100 mm Bending force: 150 t Maximum stroke: 215 mm Descent speed: 190 mm/s Fodpfxsyyb D Re Ag Iopl Working speed: 10 mm/s Return speed: 150 mm/s MACHINE DETAILS Control: Cybelec ModEva 12 CNC CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 Weight: 10,000 kg Main motor power: 11 kW Total connected load: 15 kW Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Nominal pre-fuse current: 35 A Hydraulic operating pressure: max. 300 bar Pneumatic operating pressure: max. 8 bar Overrun distance: 9 mm EQUIPMENT Hydraulic upper clamp: RFA Hydraulic lower clamp: WILA 13 mm Complete tool set (model: P5)

Condition: ready for operation (used), machine/vehicle number: 22613, functionality: fully functional, stroke length: 400 mm, throat depth: 300 mm, bending force (max.): 200 t, distance between stands: 2,750 mm, working length: 3,100 mm, TECHNICAL DETAILS Press force: 200 t Bending length: 3,100 mm Frame gap: 2,750 mm Stroke: 400 mm Fsdpfx Ageygw Azj Ispl Throat depth: 300 mm MACHINE DETAILS Control: CYBELEC DNC7000 Total power requirement: 18.5 kW Oil capacity: 330 l Suitability: Suitable only for thin sheet metal Dimensions & Weight Space requirement: approx. 4,300 x 2,400 x 3,600 mm Machine weight: approx. 18,500 kg EQUIPMENT Electric backgauge (X-axis) CNC crowning 4x controlled backgauge fingers 2x front support arms with SLIDING SYSTEM Hydraulic upper and lower tool clamping Side and rear safety guards Tools (3 cabinets) Foot switch Operating manual

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, overall weight: 16,000 kg, controller model: Cybelec DNC 800, working width: 3,000 mm, bending force (max.): 160 t, distance between stands: 2,650 mm, TECHNICAL DETAILS Press force: 160 t Bending length: 3,000 mm Frame gap (distance between uprights): 2,650 mm MACHINE DETAILS CNC axes: y1, y2, x, R Control: Cybelec DNC 800 Fodszk A Ivopfx Ag Ijpl Machine weight: approx. 16 t EQUIPMENT Two-hand foot switch Hydraulic top tool clamping Hydraulic crowning Hydraulic bottom tool clamping 5 manually adjustable backgauge fingers Die shifting Tool package Side safety doors

Year of construction: 2024, condition: new, The DA-69T control system offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The complete 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product. Delem-69T features: • 3D and 2D graphical touchscreen programming • 3D representation in simulation and production • 17-inch TFT color display with high resolution • Complete Windows Application Suite • Compatible with Delem Modusys (modular scalability and adaptability) • USB, peripheral interface • Open system architecture • Sensor-based bending and correction interface • Profile-T3D offline software • Significant contribution to environmental protection; climate change and the greenhouse effect will thank us, as will future generations! AD-S 30175 with Y1, Y2, X, and R axes Bending force: 175 tons Bending length: 3050 mm Distance between stands: 2600 mm Rapid traverse speed: 120 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec Installation height for tool clearance and the penetration depth of your press brake: 30 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Overhang: 410 mm Support arms: 2 pcs Backstops: 2 pcs Press force and speed of the press brake. X-axis: 500 mm/sec X-axis travel direction: 650 mm Speed of the R-axis max.: 350 mm/sec R-axis travel direction: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 liters Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight approx. 11500 kg Control system: Delem-69 T Options: Y1, Y2, X, R (4 axes) X=650mm X, R Control system - CNC Cybelec ModEva 19T DBEND 3D CAD/CAM import & simulation program CNC-controlled motorized crowning Adjustable front support arms with T-slot, clip stop, and guide along the entire line Rear stop: Siemens DC servo motor & linear guide & ball screw system Protective cover Fpodpfed Tpadex Ag Ijl CE standard with manual Fiessler AKAS II M - FPSC-B-C (SAFETY PLC) Wila Hyd. top - NSCL-I-HC/UPB - PRO - Max load 180 t/m - Power pack required Wila Hyd. bottom - NSCR-I-HC-CNC/UPB - PRO - Max load 200 t/m - Power pack required Power pack for hydraulic clamping DAM (Durma angle measuring system) 2 YEAR WARRANTY The machine can be inspected and demonstrated at any time by appointment at our showroom in Staufenberg. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, pressing force: 150 t, stroke length: 315 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 3,100 mm, throat depth: 450 mm, clearance between the columns: 2,700 mm, oil tank capacity: 200 l, total length: 4,000 mm, total width: 1,910 mm, total height: 2,880 mm, controller manufacturer: JFY lub Dalem, controller model: TJS90 LCD 19', control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: CE marking, documentation/manual, safety light barrier, Condition: New Delivery time: In stock Pressing force: 150 tons Bending length: 3100 mm Axes: 6+1 (Y1, Y2, X, R, Z1, Z2 + deflection compensation) Stroke: 315 mm Distance between uprights: 2700 mm Throat depth: 450 mm Drive: Hydraulic / Hybrid Sheet support arms on a linear guide Front and rear laser safety system Equipment complies with CE regulations Fpedpfx Agezg Tuxj Iel Operating manual available in POLISH, GERMAN, or ENGLISH Available for immediate dispatch from stock.

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC Delem DA-58T Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor Fpsdpfjgih Iuex Ag Ijl - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 Fodpfogi Dlpjx Ag Iopl The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-N Estun E21 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping E21 controller (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps - Intuitive operation through the use of English abbreviations, which are explained during training It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Fpodpfeh Ranpsx Ag Ijl Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, pressing force: 250 t, overall weight: 27,000 kg, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Fpodszk Ez Eopfx Ag Iol Press force: 250 tons Bending length: 3,550 mm Frame width: 3,050 mm MACHINE DETAILS Dimensions & Weight Footprint: approx. 4,500 x 2,000 x 3,400 mm Machine weight: approx. 27,000 kg

Year of construction: 1990, condition: used, pressure 1500 kN Fpedpfx Agsd Ih S Ue Iol chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown 3 sets of tools included

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Fpodjvxipgopfx Ag Iol Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C Fpjdpfxeiwfp Tj Ag Iol - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier - 24 months warranty - Commissioning, training

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 76820 € 1451.9 € 160 to 4050 mm Y1 / Y2 und X Achse 200 mm 3600 mm 300 mm 430 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 620 mm 250 mm/s 858 mm 104 mm 15 kW 4850 mm 1900 mm 2610 mm 10500 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility Fpedjwird Hepfx Ag Iel - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC crowning table intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam sheet support arms protection covers on the sides andback side according to CE rules oilfilling users manual in GERMAN orENGLISH ADVANTGES OF PBF SERIES: - compact structure - low cost due to serial production of standardised models without restrictions in quality and accuracy OPTION: CNC controlled R-axis (adjustment range in X = 500 mm) DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES! (sample photo)

Condition: new, Equipment: CE marking, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2700 mm 5 Stroke 250 mm 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm Fpsdpfx Asy U Hmgeg Iel 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA69T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, stroke length: 240 mm, throat depth: 300 mm, controller model: CYBELEC DNC 880S, bending force (max.): 175 t, distance between stands: 3,050 mm, TECHNICAL DETAILS Pressing force: 175 t Bending length: 4,050 mm Distance between uprights: 3,050 mm Throat depth: 300 mm Stroke: 240 mm Stroke speed (down, unloaded) max.: 140 mm/s Working speed max.: 9 mm/s Stroke speed (return) max.: 130 mm/s Distance table/punch min.: 370 mm Distance table/punch max.: 610 mm MACHINE DETAILS Control: CYBELEC DNC 880S Total power requirement: 15 kW Controlled axes: Y1, Y2, X, R Dimensions & Weight Space requirement: approx. 5.89 x 3.6 x 3.16 m Machine weight: approx. 15 t Fpsdpfx Ajygw Ahog Ijl EQUIPMENT CNC crowning 4x backgauge fingers (manually adjustable) Foot switch 1 set of upper tooling 1 set of lower tooling 2x front sheet supports Side and rear safety guards Operating manual

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, controller model: Cybelec ModEva 10S, empty load weight: 16,300 kg, bending force (max.): 170 t, working length: 4,050 mm, TECHNICAL DETAILS Press force: 170 t Bending length: 4,050 mm MACHINE DETAILS Control: Cybelec ModEva 10S Machine weight: 16,300 kg EQUIPMENT Lasersafe 2 sheet supports Die shifting Crowning Fjdpfx Agoxwnv Eo Iepl Pneumatic tool clamping top and bottom Controlled axes: Y1, Y2, X, R, Z1, Z2 Tool cabinet with tools

Condition: excellent (used), Year of construction: 2001, pressing force: 150 t, stroke length: 265 mm, throat depth: 330 mm, Hydraulic press brake Fab. Plague guy. QPB-M6 Year of manufacture 2001 Technical data Make: Placke Type: QPB-M6 Year of manufacture: 2001 Pressing force: 150 t Bending length: 3100 mm Thrust: 330 mm Push stroke: 265 mm Installation height 665 mm Connected load: 16 KW Rapid traverse 150 mm/s Working speed 9.8 mm/s Retraction 100 mm/s Operating pressure 300 bar Dimensions: L 3.4 x W 2.0 (+ support arms) x H 2.9 mm Weight: 10.5 t Equipment - Control: Delem DA65 2D graphics - 4-controlled axes: X, R, Y1, Y2 - 2x support arms, can be moved sideways and in height adjustable - 2-hand control panel - Hydraulic upper and lower tool clamping - CNC-controlled crowning, WILA Fpodpfxevw Trio Ag Ijl - Tool package: Upper tool straight, H 160mm, L = 2,700mm, sectioned Lower tool V15, L = 2,400mm, sectioned All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: new, pressure: 175bending length: 3020column width: 2550daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 3700x2230x3025weight approx.: 12.0504 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Esa S630 (2D Grafik Steuerung)motor power: 22Standard Equipment: KKI EUROPA XL CNC Press Brake by KK-IndustriesKK-Industries proudly serves as the official representative of the DENER Group, offering a high-quality model tailored for the European market. Fpjdpjfrvw Iefx Ag Isl The KKI EUROPA XL CNC Press BrakeThe KKI EUROPA XL, manufactured by DENER, is a robust and highly precise press brake designed for universal applications. With its superior installation height and extended stroke, the EUROPA XL is built to meet the demands of a wide variety of tasks. Its large projection minimizes limitations, ensuring a versatile and efficient operation. Quality and PrecisionAt KK-Industries, we prioritize quality, and this is evident in the exceptional features of the EUROPA XL. The press brake comes equipped with the DELEM DA 66 T control system as standard, offering intuitive operation and advanced functionality. The EUROPA XL features CNC axes (Y1, Y2, X, and R) as standard, enabling precision control over every aspect of the bending process. The CNC crowning system, integrated into the DELEM DA 66 T, ensures optimal alignment and consistent results across all bends. Top-Quality ToolsIn addition to the advanced control system, we ensure that the KKI EUROPA XL is equipped with the finest tools available. The upper tool and die are sourced from EUROSTAMP in Italy, guaranteeing outstanding quality and durability for every application. Service ExcellenceAt KK-Industries, we understand that a machine is only as good as the service it receives. That’s why we prioritize highly qualified personnel with extensive experience in CNC sheet metal working. Our team ensures that your KKI EUROPA XL operates at peak performance and receives the support it needs to excel.

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Fpjdpfxezdwfij Ag Ijl Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Year of construction: 1998, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS pressing force: 170 t bending length: max. 3340 mm stroke: 180 mm Fpsdpfemkhynjx Ag Isl distance between the uprights: 2700 mm MACHINE DETAILS weight: 11.000 kg space requirement: 3720 x 2180 x 3170 mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, controller model: Cybelec DNC 800, bending force (max.): 175 t, distance between stands: 2,550 mm, working length: 3,050 mm, TECHNICAL DETAILS Press force: 175 t Bending length: 3,050 mm Frame gap: 2,550 mm MACHINE DETAILS Control unit: Cybelec DNC 800 Total power requirement: 15 kW Fjdpjyhmc Tofx Ag Iopl Oil capacity: 300 l EQUIPMENT 2 support arms in front of the machine Pneumatic tool clamping Crowning system Controlled axes: y1, y2, x, R 2 manually adjustable backgauge fingers Two-hand foot operation Side safety doors Punch tools Segmented V-dies

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table Fodpfx Asgu N Alsg Iepl All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm Fodpotqqr Rjfx Ag Iopl control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, pressing force: 150 t, stroke length: 415 mm, throat depth: 400 mm, clearance between the columns: 2,600 mm, working range: 3,100 mm, The hydraulic system has been completely overhauled; the cylinders were removed and reconditioned, and seals, oil, and filters were replaced. New light barriers were installed, the CNC control unit was tested, and the machine was repainted. TECHNICAL DETAILS Press force: 150 t Bending length: 3,100 mm Throat depth: 400 mm Distance between uprights: 2,600 mm Fjdpfx Agoy D Ih Rs Iepl Stroke: 415 mm Axes: Y1 - Y2 - X - R - Z1 - Z2 MACHINE DETAILS Control unit: CYBELEC DNC 900 Motor power: 15 kW Dimensions & Weight Overall dimensions (L x W x H): 4,000 x 2,400 x 3,200 mm Machine weight: 12,800 kg EQUIPMENT Hydraulic tool clamping Hydraulic crowning