Condition: new, Functionality: fully functional, Year of construction: 2023, Showroom system!! Available immediately!! The flow-wrapping machine is suitable for packaging various products. An operator display (HMI) ensures easy operation and access to all necessary settings, such as flow-wrapping length and speed. Model name ////: Rotection tubular bag machine Operating display ////: 10" touchscreen, swiveling thanks to extension arm for comfortable operator handling Drives ////: Servo Packaging length ////: 50-450 mm Packaging width ////: 35-180 mm (depending on film width) Packaging height ////: 5-80 mm (depending on forming shoulder) Speed ////: 30-100 bags/min. in continuous operation Speed ////: up to 60 bags/min. intermittently Film width ////: 90-400 mm Consumption ////: approx. 8 KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 800 kg System dimensions ////: approx. 4370 x 1020 x 1550 mm (LxWxH) Error rate ////: < 5% Print mark sensor ////: Yes Colin Rek Dz Hwoqmjrb Winding shaft ////: Fixing the roll by hand without compressed air including roll stop for precise application Roll fastening and guide ////: On top Printer holder ////: available for an additional charge In order to guarantee you the best possible advice, we are happy to carry out a test with your product in advance in order to be able to offer you the appropriate settings and, if necessary, changes for the best possible performance of your product.

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 410B010616003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 410B010616003 Year of manufacture: 2006 Strapping: 5-9 mm, coil core 200 mm, width 190 mm Transport speed: 0.8 m/sec. - Transport height: 850 mm (30 packages/min. with single strapping, 15 packages/min. with parallel strapping) 12-month warranty (excluding: machine control, travelling expenses and wear and tear) Crjlinowcq E As Rqmob Properties / Features: ⦁ Suction ⦁ Reinforced exhaust, with bundle height detection via bundle press (bundle height below 10 mm to min. approx. 3 mm - depends on product) ⦁ Strap scanning ⦁ Strap ejector ⦁ Strap infeed, automatic ⦁ Strap cutting blade ⦁ Command buttons, additionally opposite operating unit (START/STOP/NOT-OFF) ⦁ Blow gun with spiral hose ⦁ Bundle height-dependent automatic belt tensioning system ⦁ Inlet and outlet timing with complete plug connection, 16-pin (Walther) ⦁ Height adjustment of the feet ⦁ Light barrier attachment at the top ⦁ Mains cable, length 3 m ⦁ Package scanning ⦁ Parcel stops, move away from the parcel when opened ⦁ Parcel press gentle (with laser) ⦁ Plexi protective doors on the side, firmly screwed in place ⦁ Press beam, double ⦁ PLC control with jog dial control panel ⦁ Coil quick-change device ⦁ Cycle-stop interlinking ⦁ Table belt drive, infinitely variable (frequency converter) ⦁Electrics: Connection voltage 1 phase with neutral conductor or 2 phases at 198V, 208V, 218V, 220V - 240V, 390V - 410V, 450V - 500V 50 Hz or 60 Hz - Here set to 400 V - 50 Hz -

Condition: excellent (used), Year of construction: 2013, operating hours: 24,666 h, Functionality: fully functional, - Top-functioning packaging machine (thermoforming machine) from the PowerPak series. - Currently still in operation until the end of 2024. - Perfect for packaging pasta. - Inspection under production conditions (packaging of gnocchi) possible at any time. - On request with matching ExaktaPack brand infeed conveyor and scales (not included in the price) - On request with suitable metal detection with and without additional ExaktaPack label dispenser (not included in the price) Colineua Hcho Rqmjrb Technical details GEA PowerPak: - Film width: 350 mm lower web, 334 upper web - approx. 12 cycles / minute - Forming tool: 1.1, 2.1. 2.2 - Rigid film, PP, PET etc. - Bottom film preheating - Longitudinal and cross cutting with noiseless edge trim winding - Machine length approx. 9m - Draw: 60 mm - Busch vacuum pump (included) - Pneumatic discharge station and distribution - Continuous cooler to cool the forming and sealing stations. Further on request and/or inspection

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 131, total length: 8,500 mm, total width: 1,100 mm, total height: 2,100 mm, input voltage: 400 V, For Sale: Used Multivac R240 thermoforming machine / horizontal packaging machine Including: - Busch vacuum pump Type: (R5 RA0302 D) - Multivac mixer / mixer for CO2 and N2 (oxygen and nitrogen ratio) - Labeling machine from MR Etikettiertechnik Type: MR635 - Matching cool box from Selbach Type: Cooler BK70 Year: 2017 Coljwc T Uyjin Rqmjrb thermoforming machine: Brand: Multivac Model: R240 Year of construction: 2004 Width foil: 420 mm Max depth mold: 125 mm Machine dimensions: Length: 8500 mm Width: 1100 mm Height: 2100 mm If you have any questions or comments, we would like to hear from you! Viewing is possible on location! Transport in consultation. Kind regards, Leo Holland

Year of construction: 1990, Condition: refurbished (used), Functionality: fully functional, machine/vehicle number: 647-230, Lid Punching machine without tools Type Hamba 647-230 foil width - 230 mm very good condition - with used embossing calender for worm structure - Power connection: 220/380V - three phases - Additional punching tools available - e.g. Cjljnr Ex Tsin Rqmsrb 1x 2-fold tool - diameter 80.50mm 2x 2-fold tool - diameter 75.50mm 1x 2-fold tool - diameter 59.54mm 1x 2-fold tool - diameter 93.80x120.90mm

Condition: used, Year of construction: 2016, Strapping machine Manufacturer: Transpak Type: TP 601D1 Year of manufacture: 2016 Cslin Rsv Ic A Esqmsrb Cardboard up to 1,050 x 800 mm (W x H) ä270425

Condition: new, Functionality: fully functional, machine/vehicle number: V101VVNG6004ESGR0ZL200H, Year of construction: 2023, Production orientation ////: Vertical Conveyor system ////: Feed and discharge optional and dependent on the product Crelin Rjq Ikg Ijqmeb Film feed ////: rear Form shoulder ////: fixed Operator display ////: touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (depending on film width) Packaging height ////: dependent on forming shoulder Speed ////: 20-110 bags/min. depending on material, packaging size and product Foil width ////: 100-320 mm Consumption ////: approx. 4.6KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 240 Kg System dimensions ////: approx. 1500 x 960 x 1220 mm System material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer mount ////: suitable incl. wheel printer optional for an additional charge of EUR 1200 Delivery time ////: Current delivery time under 10 weeks Features: • Stainless steel version also suitable for the food industry • Application for powder, grains, liquids, paste/dough and Small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control using color symbols • Bag closing system for finished stand-up pouches • Safety protective covers • Can be combined with upstream and downstream machines • Customer-specific changes / designs on request Additional options (on request and for an additional charge): • Stainless steel finish / painting • Zig-zag knife, Euro hole stamp etc. • Automatic stopping for empty products (no product - no bag) • Automatic product feed systems, cyclical insertion systems • Perforation units (tear thread) for easy opening • Length-dependent product processing using photocell query

Condition: refurbished (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 112A011713008, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 112A011713008 Year of construction: 2017 for parcels max. 600 mm width x 600 mm height 12-month guarantee (excluding: machine control, travel costs and wear and tear) Properties / features: - ASLF anti-strap loss function permanent strap control - Automatic tape feed Coliewclgnjn Rqmorb - Strap width 5 - 12 mm, optional - Operator terminal with soft tension button - DAT Direct-Access-Technology - Torque-controlled retensioning force, adjustable - Single item strapping - Foot switch on the operator side - Mobile machine - Table height infinitely adjustable - Table top hinged at the front and removable at the rear - Machine colour: Frame RAL 7004 / Frame RAL 7016 - Internal strapping coil - Mains connection at the top - Strapping tape 5x0.47mm, white, 7000 m/coil, polypropylene DIN EN 13 394 The machines are delivered with this strap, the remaining strap is included. - Table top front 600, hinged - Rear table top 600, screwed

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 55846, type of input current: three-phase, input voltage: 400 V, control voltage: 24 V, Equipment: documentation/manual, Used strapping machines from Mosca type RO-TR500-3. Celinovzquvs Rqmsrb

Condition: new, Year of construction: 2020, Functionality: fully functional, --- ### nNewest automatic sealing machine type L Brand: nNewest Product category: Packaging machines Description: The News Automatic Sealing Machine Type L is a versatile solution that is widely used in various industries. It offers high flexibility and performance in the packaging of various products. The machine is easy to install and operate, with a robust stainless steel construction for durability. Technical specifications: Colin Rqotxl D Domjrb - Capacity: 50 pieces/minute - Voltage: 380V / 50-60Hz / 3-phase - Main material: Stainless steel - Compatible packaging materials: PVC, PP, POF - Features: Extra-long shrink tunnel, intelligent temperature controller, closing thermal wind internal circuits - Accessories: Standard with loading and cooling zone, heat-resistant, powder-coated carrier, stainless steel conveyor roller with silicone coating, performance-coated tunnel covers, electrical control panel Location and collection: - Collection possible in 14547 Beelitz - Shipping possible for additional shipping costs For further information, please send us an e-mail or contact us via WhatsApp.

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: FFS Adams Impeller 1 spout, filling weight (min.): 10,000 g, Haver & Boecker Adams 1 spout bag filling machine with turbine dosing in Atex version. suitable for packaging fine powders in FFS foil. Video is just an example, the machine has not been used for carbon black. Celin Rovyh U Dsqmerb Product path in stainless steel 316Ti. Machine has worked for 5 years at a customer of ours, but due to closure of the production location this young used machine has become available. Contact us for detailed information. Machine is available at short notice.

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD – SPA – class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weighing scale Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and – tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g Stores 800 different dosing recipes Croliov Sntdjn Rqmob Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V – single-phase Doser / control box connection: direct Materials in contact with the ingredient : 304L electro-polished stainless steel. GMP-compliant construction Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: new, Functionality: fully functional, Year of construction: 2023, machine/vehicle number: V1 01HUNG60KET9ESGRBMSZ601W, ! short delivery time, under 10 weeks ! !! We are happy to advise you !! Model name: Rotection Box-Motion U Production orientation ////: Horizontal Conveyor system ////: Chain conveyor belt, length as desired Film feed ////: from below Form shoulder ////: flexible and fixed Operator display ////: 10" touchscreen with memory functions, swiveling through extension arm for comfortable operator handling Drives & control ////: 9 servo motors and PLC control Packaging length ////: 200-600 mm Colinsq Ikgyo Rqmsrb Packaging width ////: max. 250 mm (depending on film width) Packaging height ////: max. 120 mm (depending on forming shoulder) Speed ////: 10-60 bags/min. Film width ////: max. 600 mm Consumption ////: approx. 9 KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 1500 kg System dimensions ////: approx. 3560 x 1320 x 1500 mm System material ////: 304 stainless steel Print mark sensor ////: Yes External compressed air required ////: Yes Printer holder ////: for an additional charge Delivery time ////: Current delivery time under 10 weeks Features: • Box motion end seal • Steel frame / stainless steel construction • Splice function, dependent on material and speed • Fixing of the unwinder by hand without compressed air • Automatic roll centering for precise application • Automatic stopping for empty products (no product - no bag) • Simple touchscreen operation using color symbols • Continuous feeding of products through sensor control • Print mark sensor included • Safety protective covers • 3-sided weld seam packaging (fin seam) • Longitudinal welding on the underside of the bag • rotating cross-welding system • can be combined with upstream and downstream machines • customer-specific changes / designs on request Additional options (on request and for an additional charge): • thermal transfer printer e.g. best-before date, print width up to 60mm • stainless steel finish / varnishing • cooling applications for ice cream packaging • zig-zag knife, euro hole stamp etc. • applications for shrink films (flow shrink) • gassing units for protective atmosphere (extend product shelf life) • automatic product feed systems, cyclical insertion systems • perforation units (tear thread) for easy opening • length-dependent product processing through photocell query

Condition: reconditioned (used), Year of construction: 2012, Functionality: fully functional, Cyklop Strapping Press / Cyklop Pallet Press Technical Specifications: Machine Type: XZE 30.2-18 DT Year of Manufacture: 2012 Packaging Unit: Width: 800 – 1,200 mm Height (including pallet): 350 – 2,600 mm Weight: 50 – 1,500 kg The Cyklop Press: Length: 1,950 mm Useful Width: 1,100 mm Conveyor Height: 350 mm Roller Diameter: 89 x 3.25 mm Roller Shell Surface: Galvanized Roller Pitch: 150.8 mm Load Capacity: 1,500 kg Centering Alignment: Concentric Minimum Usable Width: 600 mm Maximum Usable Width: 1,300 mm (incoming pallet is from the upstream Conveyor (centered conveyance) Centering beam length: 1,400 mm Performance: Total output: 60 packages/h with 2x2 strapping Power supply: 3/N/PE, 380 - 415 V, 50 Hz (loadable neutral conductor) Colinjwdha Ho Rqmsrb Emergency stop: 2-channel Area protection: 2-channel Control system: Siemens S7 300 Functional sequence: The packages are positioned via the conveyor system of the strapping press. The signal exchange with the higher-level control system takes place via potential-free contacts. The number and position of the straps are determined by the preselected program. After strapping is completed, the package is released to the higher-level control system for further transport. The package is then sent to the higher-level control system. Intended strapping material: Quality: PET strapping Documentation: Version: Cyklop Standard Quantity: 1 copy in a Cyklop folder 1 copy on a USB stick in PDF format

Condition: used, Year of construction: 2006, Functionality: fully functional, BVM Brunner 8030 Celinst Euuwo Rqmerb

Condition: good (used), Year of construction: 2020, Lot consists of: Crolinev T U Rfs Rqmjb (1) Labeling System Item consists of: (1) Labeling System

Condition: used, Packaging machine, strapping tool, and automatic strapping machine ORGAPACK Type CT 2650 Strapping machine for plastic strapping Automatic strapping machine, automatic strapping machine for PP strapping Machine No. 1624, built approx. 2010 Table size: 930 x 470 mm Working height: 700 to 800 mm Maximum frame width: 930 mm Maximum frame height: 700 mm Package width: max. 900 mm Package height: max. 680 mm Package width: min. 80 mm Package height: min. 30 mm Strap width: max. 12 mm (installed is 12 x 0.55 mm) Tension force: 10 to 500 N Coil width: 180 mm Power supply: 400 volts, 50 Hz. Crolijukxwmen Rqmjb - Fully automatic strapping machine for PP plastic packaging strapping (polypropylene packaging strapping) - Sealing unit with heat-welded seal (heat wedge seal) - Continuously adjustable strap tension via electric slip clutch - Electric foot switch - Strap dispenser fixed to the side of the machine - Stainless steel table with steel rollers - Mobile on casters - Operating instructions - Included is a roll of plastic packaging strapping 12 x 0.55 mm, Ø 400 mm (black) Function: The strap is located in the outer frame. The strap is automatically wrapped around the object to be packaged (carton) and inserted into the clamping point. The tensioning mechanism is electrically triggered. Once the tension is reached, the strap is welded and separated. The strap then immediately re-runs automatically through the outer frame. Dimensions L x W x H: 1540 x 520 x 1630 mm Weight: 160 kg Good condition

Condition: used, Year of construction: 2020, Manufacturer : Hagmann Tec AG Model: MEDIMAT 711-45 Year : 2020 Type : Heat sealer / Sealing machine Maximum power : 8 kW Pressure : 6,0 – 8,0 bar Format : interchangeable sealing plate Celinjv Sm Uyj Rqmerb Sealing surface 550x350mm Sealing temperature up to 250°C Sealing force 10-70 kN Sealing time up to 9.9 seconds Documentation available

Condition: reconditioned (used), Functionality: fully functional, KALLFASS Foil packaging machine with shrink tunnel Plant consists of: Celowcnqcoin Rqmerb 1) Kallfass Universa 8060/200 foil wrapping & sealing 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - extra 4) Storage device for wrapped packages - extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos Please phone re price negotiations

Year of construction: 1993, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 10.45224, Folder-gluer machine converted for mailing bags. An on-site inspection is possible. Crjlin Rjvzq Sbeqmeb

Condition: refurbished (used), Year of construction: 2016, BVM sc 4530 Csliowbd Uzen Rqmorb

Condition: good (used), Year of construction: 2020, Lot consists of: (1) Palletizing System, (1) Octopus Compact TS Automatic Wrapping Machine, made by Haloila Lot consists of: (1) Palletizing System, (1) Octopus Compact TS Automatic Wrapping Machine, made by Haloila Crjlin Rsv T U Nzsqmjb

Condition: used, Film sealing machine AUDION ELEKTRO type D552 V10 Vertical band sealing AUDION Packaging Machines Continuous heat sealer, bag closing machine, bag sealing machine Continuous heat sealer Machine. No. 9607552683416 Year of construction 1996 Sealing seam width approx. 10 mm Sealing length endless Mains connection 230 Volt, 50 Hz, 740 Watt - infinitely variable temperature setting from 80°C to 320°C - infinitely variable belt speed from 1 to 12 meters/min. - mobile base frame space requirement L x W x H 1400 x 600 x 1200 mm Creleqlkivoin Rqmob weight 105 kg good condition

Condition: used, Year of construction: 2019, operating hours: 40 h, total width: 1,450 mm, total length: 2,360 mm, total height: 1,420 mm, power: 3 kW (4.08 HP), Manufacturer : Novexx Solutions Model TE 204 Year : 2019 Type : Tamper-evident labeller Type of products handled : Carton Labelling head : ALS204 Colinjv Sd Spe Rqmsrb Dispensing speed : max. 40 m/min Label width: 10 -110 mm Label length: 5 to 600 mm Supply voltage: 220V Motor power: 2.5 kW Technical specifications Dimensions : 2363 x 1455 x 1420 mm

Condition: used, Year of construction: 2008, Functionality: fully functional, BVM compacta. Crslin Rotu Ihdeqmob