Year of construction: 2025, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations Djln Uiksv Npx Nj Uecg The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: used, Year of construction: 2017, Contimeta SIAT SM116 - K11/70 Automatic carton sealer with automatic folding system and manual format adjustment Automatic machine for standard closing The carton sealer automatically folds the upper lid flaps by means of guide rails and a closing arm 2 motorized lateral conveyors with a width of 50 mm Transport speed 20 meters per minute Voltage 400V signal system for tape end or breakage special painting: frame color RAL 5003, covering safety cage RAL2001 Energy saving system Special design: 3 colored indicator lamp: green/orange/red for machine condition ok / tape almost empty / tape broken. Including potential free relay contacts for these signals Cardboard is only glued at the top, bottom with additional part, can be offered with Carton dimensions L x W x H (mm): Min. 300 x 150 x 180, Max. 900 x 650 x 700 The SM11-6 processes between 600 and 1000 cartons per hour Doln Uiek Abfqek Uecg The guide rails are manually adjustable The height of the sealing unit can be adjusted manually The working height is infinitely adjustable (500 - 750 mm) Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), Year of construction: 2010, Professional packaging machine from a renowned European manufacturer, equipped with many options and settings. Suitable, for example, for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printed and paper products, cosmetics and textiles. Functions: -Automatic mode / manual mode selectable. The packaging process can be started by several options. Manually by manual key or alternatively foot switch. Automatic by entering time intervals at which the shrink hood automatically lowers. -Automatic product ejection by the outfeed belt. -Automatic residual film rewinding possible. Setting options: - "Welding only" or alternatively "Welding and subsequent shrinking". -Welding time adjustable. -Shrinking temperature adjustable. -Shrinking time adjustable. -Hold time adjustable. -Cycle time for automatic operation adjustable. -Conveyor belt transport time adjustable. -Program memory. -Conveyor belt with spindle infinitely adjustable in height. Doln Uikspir Ave Uecg Other features: -Water-cooled welding unit (closed system). -Needle perforation possible via 2 adjustable needle rings. -Maximum package size theoretically approx. L 550 x W 400 x H 200 mm. -Maximum film roll diameter cirka 300 mm. -Maximum film roll length cirka 600 mm. -The machine can be pushed or fixed by means of lockable foot rollers. The machine was serviced by the manufacturer and then stored without further use. It can be demonstrated under power.

Year of construction: 2006, Condition: excellent (used), Manual packing machine Djln Uiksiz S Ifj Uecg

Year of construction: 2022, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 220219, ORITEQ Q-BOX ADVANTAGES Dcslewgl N Den Uik Ujg With Q-BOX, you can create custom boxes for your products according to your specifications. This increases the value of your product and prevents damage during transport. It eliminates the use of oversized cartons and the storage costs of unused cardboard, protects your products from damage, and prevents wasted money. Q-BOX gives you the opportunity to produce 100% sustainable and environmentally friendly products. Reduce Costs You don't have to specify a minimum order quantity for boxes. You can produce customized boxes based on the cardboard in your warehouse. Q-BOX automatically produces personalized boxes on time. Raw materials are used efficiently, resulting in significant savings on packaging and filling materials. Save Time and Money Employees no longer waste time searching for suitable boxes for packaged products. Better Protection During Transport. You can produce boxes that fit each product perfectly and offer better protection during transport. Increases efficiency Reduces labor Minimizes damage Minimizes empty space in the box Less corrugated cardboard is used Organizes storage space Reduces shipping costs Increases customer satisfaction Increases environmental sustainability Condition: very good, little used Box width min. 200 mm / max. 2600 mm Box thickness: 2-7 mm Boxes/min. 5-14 FEFCO types: 80 Number of vertical knives: 8 (standard) MIN. DISTANCE BETWEEN VERTICAL knives: 22 mm MIN. Package height: 22 mm Carton feeder: 1 Carton type: Continuous form / Single sheet feeder Speed: 60 m/min Power: 2.5 kW Compressed air: min. 7 bar ORIMAK SOFTWARE Weight: 2240 kg We are selling the machine because we mostly only do series production and very few custom orders. The machine will be available for sale in June 2025.

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, Meurer corner welder up to 800x1200mm. Machine has been used very little and is in very good condition. Dcelev Tzinjn Uik Ujg Can possibly be purchased together with a Meurer shrink tunnel with a passage width of 800mm.

Year of construction: 2025, Condition: as good as new (ex-display), machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Doln Uov Iqyrjik Uscg Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Dsln Ujux Sfzeik Ujcg Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: good (used), Year of construction: 2007, age 2007 banding device Djln Uswagr Tsik Uscg computer control with digital display mobile sub-frame Delivery time: immediately

Condition: excellent (used), LINE (year 2024) for transporting, assembling and pressing furniture carcasses. Composed by: A) Motorised belt for transporting and assembling furniture (length mm 2500) Dcsln Uikswcn Hds Uog B) Clamping Pressing machine Mod. WEPRESS TWIN EP 8. 2, with motorised belt conveyor, furniture diemensions - Min/Max length: mm 250 /2500 - Min/Max depth: mm 300 /820 - Min/Max height: mm 250 / 1200 C) Turning device (0°-180°) Automatic (motorised belt) length mm 1800 + flaps D) Motorised conveyor belt (length mm 2500) E) Motorised conveyor belt (slow speed) length mm 7000, for insertion of drawers, corners (protections), cartons (packaging) F) Motorised conveyor belt (length mm 5000) G) Motorised conveyor belt (length mm 2500) H) System Mod. SILVERPACK 150 LIGHT - S self-dimensioning system for automatic closing (lower and upper) of cardboard boxes. Complete with lower and upper, self-adjusting (with adhesive tape) TAPER. Maximum useful dimensions (external box) mm 1530 x 820 x 1350 (H) and Minimum useful dimensions (external box) mm 300 x 160 x 160 (H) I) 90° Transfer (with rollers and 6 belts) for the outfeed of packed products (mm 1600 x 850 x 700H) L) Inclined conveyor with idle rollers for the accumulation of packed furniture (mm 6000 x 800 x 450H)

Year of construction: 1998, Condition: excellent (used), max working width 150mm max working height 120mm infeed table length 700mm Dcjlsh Hl Ebsn Uik Uog outfeed table lenght 700mm variable regulated feeder year 1998

Condition: used, Year of construction: 2004, Sealing bar length 2500 mm Maximum width of upper reel 2400 mm Maximum width of lower reel 1450 mm Width of conveyor belt 1300 mm Delswh A Hcjn Uik Ujcg Length of entry belt 4800 mm Maximum useful height 800 mm belt speed 5-25 m/min with inverter heat shrink tunnel kw 50

Year of construction: 2025, operating hours: 1 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: S23NEOS04, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Delov Iq Aaen Uik Uscg Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: used, Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Dcoln Uisk Abllok Ujg Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second

Condition: like new (used), Year of construction: 2022, operating hours: 400 h, Functionality: fully functional, total length: 3,818 mm, total height: 1,785 mm, total width: 1,885 mm, product height (max.): 120 mm, product length (max.): 400 mm, product width (max.): 420 mm, working height: 870 mm, overall weight: 677 kg, film width: 600 mm, Equipment: documentation/manual, For sale: Minipack-Torre Pratika 55 smart packaging machine in mint condition. Deln Uewdw Adjik Uocg The machine offers the following features: – Automatic sealing machine with integrated tunnel – 180° return conveyor belt – Vertical photocell – Rotating bars in the tunnel – Stainless steel product tray – Adjustable guides – Cycle speed: 0 – 1,200 cycles per hour – Max. product size: length 400 mm / width 420 mm / height 120 mm – Max. film dimensions: width 600 mm / roll diameter 300 mm – Working height: 870 mm – Dimensions with return conveyor belt: length 3,818 mm / width 1,885 mm / height 1,785 mm – Connected load: 230 V / 1ph / 3 kW / residual current up to 30 mA (RCD type B or direct connection) – L-sealing system – Schneider Electric PLC M221 with 128 individually configurable and nameable programs – Color 4.3-inch touchscreen control panel – USB and SD communication interface – Servo Drive technology with brushless motor from Schneider Electric – Micro-perforation device with film tension adjustment at the set product height – Height-adjustable triangles and sealing bars – Standard conveyor belts comply with the strictest food regulations (FDA), fully antistatic – Motor-driven waste wrapper – Integrated shrink tunnel with reduced energy consumption – Weight: approx. 677 kg – Like new / Year 2022 / Very little use – Available immediately

Condition: used, Year of construction: 2023, Functionality: fully functional, Think Green, Box On Demand, pay attention to your carbon footprint. Vision 2800 Automatic Carton Machine for processing continuous cardboard from the stack, also suitable for single-sheet feeding. Machine Description: The machine listed here belongs to the static machine series, meaning that the cross-machine operations are performed on the upright carton. The machine is designed for high productivity. The maximum working width of the carton is 2,800 mm. All tool settings are performed automatically. 1) Main machine body (automatic carton cutting machine): Linear cross-cutting unit for the head-to-toe cut and the cross-cuts on the carton. Linear cross-creasing unit for the cross-creases on the carton. (Supplied as a cross-creaser, cross-creaser with perforation) Djlnowb Utzo Uik Uscg Longitudinal creasing groups from above for longitudinal creasing on the cardboard. Longitudinal cutting groups for longitudinal cutting. 2) Double cardboard magazines Two cardboard magazines ensure the provision and feeding of the raw cardboard to the processing machine. Stack height of continuous corrugated cardboard up to a maximum of 2,200 mm is possible. 3) Control cabinet, control system, electronics: Contains all components required to operate and control the system. Control cabinet components are based on Siemens. The machine will be available in July 2025 and will then be available for sale.

Condition: new, 23 boxes (45 rolls) of strapping tape, Mosca, 8x0.45mm, length 4500m, core 200, transparent – used -: Price for complete purchase ex-site: only €2,200 (net)!! Manufacturer: Mosca Type: Rollenkenner pp-080-045-tr-1-g-200-4500 Contents: 2 x 4500m Core: 200mm Color: Transparent 22 complete boxes (2 rolls each) plus 1 roll Condition: New Available: Immediately Dcelev T Rw Ijn Uik Ujg Location: Braunschweig

Condition: good (used), Year of construction: 2000, age 2000 mobile stacking system for markfree delivery bundling delivery with max. 3up Dcoln Uiev Unxfjk Uog computer control with digital display banding with paper or plastic bands mobile sub-frame Delivery time: immediately

Year of construction: 2025, operating hours: 1 h, Condition: like new (used), machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Dcslnov Iqruj Uik Uog Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Condition: used, Year of construction: 2018, Label dispenser Macro SP12 right side RA1956 Manufacturer: Schwinn Model: Macro SP 12 Year of manufacture: 2018 Alignment: right Label passage: up to 115 mm Label speed: 1-18 m/min Maximum diameter label roll: 300 mm Core diameter 40 mm expandable with adapter Power supply: Euro plug 230/50Hz Integrated control with control parameters, controllable inputs and outputs, fault messages,... Additional equipment: Start triggering external AP 010-500 Vacuum Applicator Module Maintenance - equipment - combination Core adapter AP 031 Prewarning - label supply Mounting frame Control box Warning light, 3-stage Djln Ujk Abm Ajik Ujcg

Condition: good (used), A good used linear weigher with Digiway controls - this machine is a single head weigher with 4 vibratory feed trays - loadcell technology and Digiway controls for fast accurate weighing and filling or granular free flowing products. Dsln Uiksu U Ai Ho Uocg

Condition: new, 12 boxes (24 rolls) of strapping tape, Tewe, 12x0.63mm, length 3000m, core 200, black – used -: Price for complete collection from location: only €1,200 (net)!! Manufacturer: Tewe Type: 12063, 7640 / Q 2242402 Year of manufacture: 2x 3,000m Dsln Uiov T Rwhek Uocg black Diameter: 200mm Condition: New Available: Immediately Location: Braunschweig

Year of construction: 2025, operating hours: 1 h, Condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Dceln Uikov Iqqws Ueg Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: used, Year of construction: 2012, Ratiostretch RS10/2 RA1978 Height: 2540 mm Width: 1650 mm Turntable diameter: 1650 mm Length: 2600 mm maximum rewindable product weight:2000 kg maximum wrappable product height: 2330 mm maximum wrappable product basic dimensions 1100x1200 mm Turntable speed: 12 rpm (max.) / 3 rpm (min.) Lifting carriage speed: 4 m/min (max.) / 0.6 m/min (min.) Turntable height: 85 mm Voltage: 230V, 50Hz, 6A Year of manufacture 2012 weight: 480 kg Foil width: 450-500 mm Foil diameter: 240 mm Roll weight: up to 20 kg Foil thickness: from 7 µm Current mounting: embedded in floor, optional drive-on ramp available Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Dcolek Abpljn Uik Ujg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We are looking forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG

Condition: ready for operation (used), A good used induction heat sealer model ICS 1H from Relco UK - ideal for low speed semi-automatic or manual line with diaphragm in cap for sealing onto container. Deln Uieua E Rqok Uecg