Used Label Systems for sale (113)

Condition: excellent (used), Functionality: fully functional, Segment I – Unwinder with stabilizing table Creb Ha Ujwck U Ro E Ieb The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment. In addition: • The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working. • Leading (pulling) servomotors ensure precise control of the material, also located in the station. Segment II – Central (Die) The heart of the machine is the flat die, allowing for cutting and embossing. It has been equipped with: • Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations. • Upper foil unwinders enabling additional material processing. • Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work. • Lower trolley as an alternative to the hanging system – used depending on the specifics of the work. Segment III – Puncher The third segment is responsible for separating cut labels and transporting them to the receiving tray. • Puncher – precise separation of single labels. • Two laminators – one on each side of the puncher, with adjustable pressure. • Unwinders and winders ensuring smooth guidance of additional raw material. Segment IV – Rewinder The last segment is responsible for the final winding of the finished material. Equipped with: • Two mandrels – enabling simultaneous or alternate winding of the finished product. • Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material. • Slitting disc knife station. • Whisk (waste) extraction system. • Web sensors placed under each overhang, ensuring optimal process control. Additional functionalities • Remote control – the machine can be operated via the tablet included in the set. • Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.

Year of construction: 2012, Condition: ready for operation (used), Labelling machine Crjb Hed A Hckoa U E Iob Built in 2012

Condition: good (used), Mirus Anleger printing machine, in working order. Crjb Hjud Awvoa U E Ieb

Year of construction: 2025, Condition: new, Lifting capacity up to 250 kg Roll width up to 500 mm Universal compatibility – Works with most printing and converting machines Safe & maintenance-free Crjb Ha U Eevrci Tj Ijb We would be happy to provide you with a detailed offer.

Condition: used, Year of construction: 1994, Functionality: fully functional, material width: 300 mm, working width: 290 mm, Equipment: documentation/manual, Nilpeter B 3000 ,year 1994 . - 6 x UV letterpress + UV drying, 1 x UV flexo , 3 x rotary die-cutting station, 1 x unwind station, 1 x rewind station, 5 x automatic electronic register control + Corona treatment, 1 turn bar, • Max. Web Width: 300mm,min web width 110mm, • Spare uv box for screen station, Command unit for the uv station plenty of rubber rollers for uv unit... Crsb Haov Rpc Re U E Isb • Operating instructions and electrical diagrams in English

Condition: good (used), TC25 Year of Manufacture: 2018 _____ Product Description: The Parkland TC25 Series R is a semi-automatic machine that is ideal for customers looking for high quality, accurate finish with a minimum amount of operator input. An entry level automatic machine that has quick and easy settings for different core diameters and wall thicknesses, this is ideal for the medium volume user. Machine Specifications and Equipment: – Parent cores range from 200mm (8″) – 2000mm (80′′) long – Core sizes from 25.4mm (1″) – 152.4mm (6″) ID – Wall thickness 20mm (3/4″) cardboard – Quick and simple core diameter change – Accurate cutting length with indexing accuracy of ± 0.2mm – CE Marked to the latest Health & Safety standards – HMI color touch screen – Rockwell Automation worldwide support network – Automatic parent core measuring facility – Mechanical torque chuck for gripping the core – Remote access via ethernet connection – Optional – Multiple cut lengths from same parent core – Electrical Supply-380/440v/50/60Hz/3 phase, neutral and earth – Power Supply 16amps / phase – Air Supply-80psi / 5.5bar – Air Consumption – 1cfm (1.7cu.m/hour) Csb Hov Iqhpea U E Ijrb _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Year of construction: 2001, Condition: excellent (used), Functionality: fully functional, The best of the hot stamping machines. In very good condition. Comes with a large supply of hot stamping foils. Many cutting knives and other consumables. There are also various winding machines; stamping foil cutters and sleeve cutters Cjb Haevzgx Rj U E Ijrb

Condition: used, Small character inkjet printer -machine is untested and is sold as a spare parts carrier- Crsb Hecbmpuja U E Ieb "The proven products of the Videojet EXCEL family mark all surfaces, continuously, contactless, flexible and extremely reliable. Already 200,000 Videojet systems are in use in production plants worldwide to print variable data on a daily basis! All printers of the EXCEL family have a RS-232/V24 data interface for integration into your production line. A enclosed stainless steel housing protects against splash water and corrosion (according to industrial standard IP 65) and makes our EXCEL printers extremely resistant, even under the toughest production conditions. The backlit LCD display with clear labeling available in many languages is simple and easy to read even from a distance. The SUREPRINT software controls individual ink droplets, their flight characteristics, distances and viscosity. It ensures a perfect print image through high operator comfort."

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 773, paper width (max.): 260 mm, 8-Color Semi-Rotary UV Offset TECHNICAL DETAILS Printing process: Semi-rotary waterless offset for labels, PVC, and films Inking units: 8 (with UV) Crjb Haewbhtbs U E Ijb Print type: 4+4 UV offset Print width: max. 260 mm Print format: max. 250 mm Speed: 50–180 Material flow Material feed: Roll to roll Unwind unit: included Rewind unit: included EQUIPMENT - Unwind unit - Rewind unit - UV drying

Year of construction: 2025, Condition: new, Jumbo roll width max 450 mm Jumbo roll diameter max 1000 mm Rewind diameter max 500 mm o Die cutting (roll-to-roll): 120 m/min o Labeling (roll-to-sheet): 120 m/min o Printing with UV drying: 90 m/min o Compatible with magnetic cylinders from 12" to ~24" Csbovq I Nij Ha U E Ijrb Optional functions: o Magnetic cylinder holder: Adaptable to existing die cutting units. o iKnife Automatic knife positioning system: Available as an additional option. Ask us. We will be happy to provide you with a detailed offer.

Condition: used, Small character inkjet printer Crob Haeb A H Ivo U E Ijb -Machine: has not been checked and is sold as a spare parts carrier -Dimensions: 500/600/H1750 mm -Weight: 40 kg

Condition: like new (used), Year of construction: 2019, GIC TAGINNOV SPEED ETIQ Year of Manufacture: 2019 _____ Product Description: A GIC RFID processing machine where the RFID is dispensed under the label where you want it. Machine Specifications and Equipment:  Speed: 3 to 50 m/min.  Weight: 70 to 16gr Crjb Ha Uev Iqg So E Ieb  Label Width: 350mm Maximum  RFID: wet  RFID width : 100mm maximum _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Year of construction: 1992, Condition: good (used), Max speed 150 m/min Unwinder + E&L web guide Ø 1000 m, max. weight 300 kg Printing units 7, gearing 1/8”CP Between station 1 and 2, there is a turner bar equipped with web guide Max. web width 413 mm Max. print width 407 mm (16”) Printing cylinders 16 x 12,625” (320,662 mm), 16 x 14,125” (358,77m mm) Anilox cylinder 4 x 255 l/cm volume 4,5 cm³/m² 6 x 140 l/cm Crob Horakb Rea U E Iob Lateral register:± 5 mm Longitudinal adjustment: Unlimited at all printing and die cutting stations, selectectable from mobile control console, smallest adjustment 0,05 mm. Web inspection:Tecscan web inspection system Drying: Optimized hot air drying Laminating station: Station 8 is a laminating station that consists of a foil unwinding unit, where web guiding ensures the foil is directed straight to the adhesive station. Following the adhesive station, air drying is employed to dry the adhesive and the laminating nip is located in this section. Die-cut station: 2 rotary die cutting stations Die cutting length: 6”-24” 152, 4 -609,6 mm Rewinder : Ø 1000 m, max. weight 300 kg

Year of construction: 2000, Condition: used, Max. speed: 11.000 cycles/h, web width: 130-265mm, max. print width: 254mm, format length: 101.6-254mm, max. processing width: 254mm, paper strength: 100-180g/m², max. cardboard strength: 300g/m², length: 10,509mm, height: 2806mm, weight: 9.5t. Cob Hasdv Nigj U E Ijrb

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 400 h, material width: 450 mm, working width: 450 mm, Material width 450 mm Print width 445 mm Jumbo rolls D 1000 mm Print length 228.6 mm to 609.6 mm 8 flexographic printing units 8 UV cassettes 2x hot air drying Creb Ha Ujqa Ax Ns E Ijb Printing speed max 150 m/min Feed printing unit +/- 4 mm Punching width 450 mm Punching length from 304.8 mm to 609.6 mm Rewind diameter D 800 mm Materials to be printed: Self-adhesive labels (paper, PET, BOPP, PVC) Paper from 30 to 200 gsm Film from 20my (BOPP), 35 my PVC/PET, shrink 12 my PET Cardboard up to 400 gsm Accessories: 16 impression cylinders 8 anilox cylinders 1 die-cutting cylinder 1 IEEC corona treatment (one-sided) 1 Meech web cleaning unit (double-sided) 2 punching units optional 1 turning cross 1 Delam/Relam 1 Coldfoil unwinder 8 LED cassette dryer GEW We would be happy to make you an offer.

Year of construction: 1993, Condition: good (used), Machine Specifications and Equipment:  Machine type: Arsoma EM 410  Year of construction: 1993  Maximum web width: 410mm  Inking units: 3 flexo printing units  with hot air drying  Die-cutting units: 3 die-cutting units  New control system  Web edge control  Gymnastics bar  Unwinder  Rewinders  Slitting unit Structure of machine Unwinding - web edge control - printing unit with hot-air drying - turning cross - printing unit with hot-air drying - printing unit with hot-air drying – Csb Hasv Dv Tvj U E Iorb die-cutting unit – die-cutting unit - grid rewind - die-cutting unit - slitting unit

Year of construction: 2016, Condition: ready for operation (used), Running length: 600mm, outer diameter: 350mm, print resolution: 203/300dpi, max. label width: 165mm, max. throughput: 120 labels/min, touch screen: 10 inch panel, max. label size: A5. On-site inspection is possible. Creb Ha Uourwx Sj E Iob

Year of construction: 2014, Condition: good (used), ABG SGTR 510-4 Turret Rewinder Year of Manufacture: 2014 _____ Machine Specifications and Equipment:  Manufacturer: AB Graphic  Machine type: SGTR 510-4  Core connection: Glueless  Year of manufacture: 2014  Working width: 510mm Crsbjv Di T As Ha U E Iob  Speed: 150 m/min  Max. roller diameter: 350 mm  Pneumatic winding spindles: 4 x 76 mm  Counter: Indication in label pieces and meters  Automatic roll ejection mechanism  Programmable closure label printing and dispensing station incl. CAB A2+/300P  Device for separating the web exactly in the lattice web (tolerance (+/- 2 mm at 70 m/min)  Electronic job data memory (500 jobs)  6 x paper web dividers  End support for winding shafts to support mandrels under 38 mm diameter  Rotary paper web divider  Freestanding slitting module with shear cut unit (serial number: 134V-1233, year of manufacture 2014)  Automatic core loader CLB 510 for pushing the cores onto the winding mandrel  Automatically adjustable core distance (gap between the cores)  Core diameter for the core loader: from 13 mm to 113 mm diameter (theoretical) and core length from 15 mm to 95 mm  Vertical core magazine _____ Accessories Included:  Manuals  Keyes  Etc. _____

Condition: ready for operation (used), Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible. Crobou N Hdyj Ha U E Ieb

Condition: good (used), Year of construction: 2021, Domino 6-color inkjet printing unit/ 3 Gallus EMS Flexo UV Year of Manufacture: 04/2021 _____ Machine Specifications and Equipment:  Unwinders  Rewinders etc.  Feldbaum & Vogt machine on July 28, 2021  Roller unwinding (76mm expansion shaft - max. diameter 1,000 mm – max. weight 350 kg )  Web cleaning (Vetaphone - contact cleaning on both sides)  Corona pre-treatment (Vetaphone on both sides)  1 piece Gallus EMS Flexo UV printing unit (printing width 337 mm - front or back printing possible - sleeve technology –  GEW UV dryer - details see specification below  Domino printing unit (6 color machine - including orange and violet as spot colors)  2 Gallus EMS Flexo UV printing units (Identical to the first printing unit.  One additional UV dryer per printing unit from GEW)  Inspection system (2 BST Super Handy Scan 4100 cameras)  Roll rewind (specification same as roll unwind) Notes: There is a maintenance contract for the Domino printing unit. The last major maintenance ( major ) was carried out by Domino on September 30, 2024. The current printing time of the Domino system to date is approx. 975 hours. Cjbev Avpbo Ha U E Iorb The machine is still in operation. Various anilox rollers / printing sleeves and inking units can be purchased for the EMS printing units. A complete overview can be provided on request. The GEW UV drying system was last installed by the manufacturer GEW _____

Year of construction: 2019, Condition: ready for operation (used), There are 2 continuous inkjet printers Videojet and Citronix available. 1) Videojet VJ 1580, year of manufacture: 2019, print speed at 10 characters/inch: 278m/min, print heads: 1, inks: dye-based, max. number of print lines: 5/head, text memory: 250, documentation available. 2) Citronix Ci1000, year of manufacture: 2011, image height: 12mm, vertical/horizontal image resolution: 50DPI/100DPI, number of print lines: 4, print speed: 304m/min, spray distance: 25mm. Documentation available. Creb Ha Ust I Tzns E Ijb

Condition: good (used), Year of construction: 1999, Nilpeter B3000 – 6 colours Year of Manufacture: 1999 _____ Machine Specifications and Equipment: Crob Ha Usv Aa S To E Ieb • 6 x Letterpress • 1 x Flexo Varnish Unit • WEB width: 300 mm • Drying: UV • With sliding • Turret Rewinder _____ Accessories Included:  Printing cylinder: 35 and Magnetic cylinder: 30  Manual  Keys _____ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 7/10 (cleaned and ready for immediate end-user deployment) _____

Year of construction: 2011, Condition: good (used), ABG Digicon 2 Converting machine Year of Manufacture: 2011 _____ Machine Specifications and Equipment: - Unwinder Cob Ha Uovfr Sde E Ierb - Flexo unit - Semi-rotary die-cutting: 25" - Rewinders: 2 - Maximum roll diameter: 700 mm - Maximum running speed: 36 m/min - Minimum plate cylinder flexo: 254 mm - Maximum plate cylinder flexo: 609 mm - Maximum rewind diameter: 600 mm - Web width: 330 mm _____ Accessories Included: - Manual - Keys _____ Technical and Optical Condition: - Technical: 9/10 (checked and in excellent running condition) - Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: good (used), Year of construction: 2010,  Age: 2010  Webwidth: 330mm  Corona Treatment  Touch Screen HMI  Unwind,  Web Guide  Splice Table  Spilker Baria Base  Flexo Varnish Unit,  Semi Rotary Die Unit with 200" Cjbeuk Hvds Ha U E Ierb  Waste Matrix Rewind  Slitting Unit

Year of construction: 2004, Condition: excellent (used), CODIMAG VIVA 340 Age: 2004 Unwinder Camera IST UV dryer 4 x Letterpress Flexo UV Varnish Unit GAP-Master Rewinder Cjb Hshtruhja U E Iorb