Przedsiębiorstwo Trans-Tech

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, total height: 2,350 mm, total width: 1,000 mm, total length: 1,300 mm, pressing force: 10 t, table width: 500 mm, table length: 400 mm, operating speed: 100 mm/s, overall weight: 1,300 kg, reverse speed: 450 mm/s, ram plate width: 360 mm, ram plate length: 280 mm, ram stroke: 400 mm, clearance between the columns: 630 mm, Equipment: documentation/manual, Hydraulic press PYE 10 S/1M. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 10 tons. Working pressure 16 MPa. Upper table 360 x 280 mm. Lower table 500 x 400 mm. Clearance 630 mm. Cylinder stroke 400 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Power requirement 5.2 kW. Weight 1300 kg. Height 2350 mm, Length 1300 mm, Width 1000 mm. Kelhswb Dhnoccqpolt The technical condition of the machine is very good. The machine has been overhauled.

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, total height: 3,050 mm, total width: 1,750 mm, total length: 1,150 mm, pressing force: 40 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 3,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, ram stroke: 500 mm, distance between stands: 800 mm, oil tank capacity: 300 l, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Kljlowbt Uqohccqpjt Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 95 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, quill diameter: 130 mm, total length: 4,500 mm, total width: 1,750 mm, total height: 1,435 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 5,600 kg, disc diameter: 800 mm, quill mount: MK 6, workpiece weight (max.): 9,000 kg, spindle mount: MK 6, TPK 90 x 2000mm lathe. Manufactured in PORĘBA (PL) - 1985. Renovation 2018. Readings in 3 axes XYZ. Turning diameter over bed 930 mm. Turning diameter over support 630 mm. Turning diameter in bridge 1200 mm. Spindle through hole 95 mm. Spindle speed range 8-800 rpm. Support feed range 80: - longitudinal 0.1 - 12.8 mm/rev. Kjlowa S Awshccqpelt - transverse 0.05 - 6.4 mm/rev. 2-speed motor 15/22 kW. Internal Morse taper 6. Weight of the workpiece: - in the chuck 800 kg, - in the centers 6000 kg, - with 1 steady rest 7500 kg, - with 2 steady rests 9000 kg, Max. turning length in the centers 2000 mm. Upper drawer travel 300 mm. Dimensions (length X width X height) 4500 x 1750 x 1435 mm. Weight 5600 kg. Equipment plan-shaft 800 mm, eyepiece 600 mm, half-eyepiece 250 mm.

Condition: good (used), Functionality: fully functional, total height: 2,650 mm, total width: 950 mm, total length: 1,900 mm, pressing force: 160 t, table width: 800 mm, table length: 700 mm, operating speed: 20 mm/s, overall weight: 6,900 kg, reverse speed: 63 mm/s, ram plate width: 400 mm, ram plate length: 400 mm, ram stroke: 500 mm, type of input current: three-phase, clearance between the columns: 630 mm, retraction force: 40 t, Hydraulic press PYE 160 x 355. Manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 160 tons. Return stroke force 40 tons. Working pressure 12.5 MPa. Upper table 400 x 400 mm. Lower table 800 x 700 mm. Clearance 630 mm. Cylinder stroke 500 mm. Down speed 20 mm/sec. Up speed 63 mm/sec. Power requirement 7.5 kW. Klelhccqjv Rx R Dspet Weight 7000 kg. Height 2650 mm, Length 1900 mm, Width 950 mm. The machine has a new piston sealing package. It is possible to inspect and check the machine in motion.

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, total height: 3,700 mm, total width: 1,250 mm, total length: 2,200 mm, throat depth: 800 mm, pressing force: 250 t, table width: 900 mm, table length: 630 mm, operating speed: 200 mm/s, overall weight: 8,000 kg, reverse speed: 110 mm/s, ram plate width: 750 mm, ram plate length: 450 mm, ram stroke: 500 mm, oil tank capacity: 500 l, PYE 250 S1M hydraulic press with ejector. Prod. by WMW VEB Zeulenroda (Germany). 1988. Parameters: Maximum pressing force 250 tons. Working pressure 20 MPa. Upper table 750x450 mm. Lower table 900x630 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Kolevcb Tlohccqpslt Down speed 200 mm/sec. Upward speed 110 mm/sec. Ejector force 100 tons. Ejector stroke 200 mm. Power requirement 20.5 kW. Weight 8000kg. Height 3680mm, length 2200mm, width 1250mm. Technical condition of the machine very good. Machine after general overhaul.

Condition: good (used), Year of construction: 1984, Functionality: fully functional, total height: 2,400 mm, table width: 660 mm, table length: 530 mm, installation height: 265 mm, stroke adjustment: 95 mm, total width: 1,300 mm, total length: 1,600 mm, overall weight: 4,500 kg, pressing force: 40 t, height adjustment type: mechanical, Eccentric press LEN 40CA. Year prod. 1984(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 40 tons - number of strokes in automatic: 70 / 142 min - number of jumps manual operation: 50 / 45 min - slider stroke adjustment: 8-95 mm - slide stroke: 80 mm - table surface: 660 x 530 mm - slider surface: 400 x 250 mm - overhang: 265 mm - motor power: 3 / 4 kW - press dimensions: 1585 x 1245 x 2370 mm - weight: 4500 kg The technical condition of the machine is good. Kjlhccqouq A Dkepelt It is possible to make a visual inspection and check the machine in operation.

Condition: good (used), Year of construction: 1981, Functionality: fully functional, workpiece weight (max.): 10,000 kg, grinding length: 4,000 mm, grinding wheel diameter: 750 mm, total width: 4,180 mm, total length: 13,440 mm, total height: 2,455 mm, grinding diameter: 800 mm, overall weight: 38,700 kg, STANKO 3M196 roller grinder. Year of manufacture 1981. Max. grinding diameter 800 mm, Max. length of ground workpiece 4000 mm, Range of grinding diameters 80 - 800 mm, Max. grinding diameter without support 800 mm, Max. grinding diameter in support 450 mm, Elevation of the tusk above the table 410 mm, Max. weight of ground workpiece in the tusk 10000 kg, Klslet I Dppohccqpet Grinding wheel dimensions ⌀750 x 100 mm, Grinding speed 50 m/s, Main motor power 30 kW, Product speed 5 - 80 rpm, Max. travel of tailstock tusk pins 100 mm, Overall dimensions of the grinder (Length x Width x Height ): 13440 × 4180 × 2455 mm, Weight of the grinder 38700 kg,

Condition: good (used), Year of construction: 2009, Line for the production of "B" type energy-absorbing barriers, SIGMA posts and semi-closed channels For 460 x 4.2 mm strip. Weight of the whole set about 25,000 kg. The line includes the following sections: Strip uncoiler with hydraulic jack for new coils. 1 roller unit + guillotine. Manipulator. Welding area. Rolling section: -rollers for profiling SIGMA post, -rollers for the "B" guide and the semi-closed channel. Bean punching machine. Punching machine for top holes. Punching machine for bottom holes. Controller with display. Instruments for SIGMA post. Kelot Ak Dpshccqpjlt Instruments for semi-closed channel. Instruments for marking.

Condition: excellent (used), Year of construction: 1977, Functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 200 mm/s, overall weight: 2,400 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, ram stroke: 500 mm, distance between stands: 800 mm, power: 12.5 kW (17.00 HP), PYE 25 SS hydraulic press. Year of manufacture 1977. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 450 mm/sec. Kslhstzxvweccqpelt Power requirement 12,5 kW. Weight 2400kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: excellent (used), Year of construction: 1975, Functionality: fully functional, total height: 31,500 mm, total width: 13,500 mm, total length: 17,500 mm, pressing force: 40 t, table width: 1,000 mm, table length: 500 mm, operating speed: 200 mm/s, overall weight: 3,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, ram stroke: 500 mm, distance between stands: 800 mm, power: 15 kW (20.39 HP), PYE 40 SS hydraulic press with ejector. Year of production 1975, manufacturer VEB Wema Zeulenroda (Germany). Kljlstzxtpehccqpjt Machine after general overhaul. Replaced piston seal. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 1000 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 450 mm/sec. Power requirement 15 kW. Weight 3200kg. Height 3150mm, Length 1750mm, Width 1150mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, total height: 29,500 mm, total width: 11,500 mm, total length: 17,500 mm, pressing force: 40 t, table width: 630 mm, table length: 500 mm, operating speed: 110 mm/s, overall weight: 3,000 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, ram stroke: 500 mm, distance between stands: 800 mm, power: 13 kW (17.68 HP), PYE 40 S1/M hydraulic press. Year of manufacture 1989. manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Replaced piston seal. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Upward speed 450 mm/sec. Power requirement 13 kW. Weight 3180kg. Height 2950mm, Length 1750mm, Width 1150mm. Technical condition of the machine very good. The machine after a general overhaul. Kslhjtzxqneccqpslt It is possible to make a visual inspection and check the machine in motion.

Condition: good (used), Year of construction: 1980, Functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 200 m/min, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, total height: 17,350 mm, total width: 16,450 mm, total length: 18,300 mm, table width: 800 mm, table length: 400 mm, power: 3 kW (4.08 HP), FNGJ 32 universal milling machine. Prod. TOS Celakovice. Table- 800x400 mm Spindle rotation - 40-2000 rpm Longitudinal and transverse feeds - 8-400 mm/min Kslhjtzxlleccqpslt Vertical feeds - 4-200 mm/min Distance from the horizontal spindle axis to the working surface of the horizontal table : 125-525 mm Distance from vertical head spindle face to horizontal table surface : 58-458 mm X-axis travels - 600 mm Travels in Y axis - 400 mm Z axis travels 400 mm ISO cone - 40 Motor - 3 kW Overall dimensions: L x W x H: 1830 x 1645 x 1735 mm Machine weight: 1725 kg Technical condition of the machine good. It is possible to make a visual inspection and check the machine in operation.

Condition: good (used), Year of construction: 1989, Functionality: fully functional, total height: 25,500 mm, table width: 800 mm, table length: 630 mm, stroke adjustment: 105 mm, total width: 14,250 mm, total length: 17,900 mm, overall weight: 5,850 kg, pressing force: 63 t, height adjustment type: mechanical, power: 7.5 kW (10.20 HP), Eccentric press LEN 63C. Year prod. 1989(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 63 tons - number of strokes in automatic: 65/130 min - number of jumps manual operation: 45/50 min - slider stroke adjustment: 10-105 mm - slide stroke: 70 mm - table surface: 800 x 630 mm - slider surface: 450 x 280 mm - overhang: 315 mm - table - slider clearance: 335 mm Klolhcetzxdzscqpot - clearance between columns: 355 mm - number of gears: 2 - motor speed: 730/1440 min - motor power: 4/7,5 kW - press dimensions: 1425 x 1790 x 2550 mm - weight: 5850 kg The technical condition of the machine is good. It is possible to make a visual inspection and check the machine in operation.

Condition: good (used), Year of construction: 1980, Functionality: fully functional, turning diameter over cross slide: 260 mm, spindle bore: 64 mm, turning diameter: 740 mm, turning diameter over bed slide: 500 mm, total height: 13,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 16 rpm, overall weight: 1,850 kg, power: 10 kW (13.60 HP), Universal lathe SNA 500 x 1000. Prod. UZINA ARAD Wrocław. Year 1980. Max. turning diameter in the bridge recess 740mm. Max. turning diameter over bed 500 mm. Max. turning diameter over support 260 mm. Spindle through hole 64 mm. Max. turning length in centers 2000 mm. Spindle speed range: 16 - 1600 rpm. Kljlhccetzw Ixjqpot Motor power 10 kW. Dimensions (length x width x height) 3800 x 1400 x 1350 mm. Weight 1850 kg.

Condition: good (used), Year of construction: 1989, Functionality: fully functional, total height: 18,700 mm, total width: 14,600 mm, total length: 35,350 mm, grinding length: 320 mm, grinding wheel diameter: 200 mm, Shaft and bore grinder. Prod. STANKO(USSR) - 1989. Diameter of the ground hole 50 - 300mm. Max. diameter of the workpiece 560mm. Distance between table and spindle 340mm. Klolhccjtzwzxoqpst Maximum length of the workpiece 320mm. Upper diameter of the inner grinding head 125; 100; 80mm. Distance from the front face of the grinding head to the spindle flange 150 - 400mm. Size of grinding disc 200 x 75 x 63 mm. Workpiece spindle speed range 60 - 600 rpm. Table movement 800mm. Power of main motor 7,5 kW Total required power 14,63 kW Dimensions of the machine (Length x Width X Height) 3535 x 1460 x 1870 mm Weight of the machine 6400kg.

Condition: excellent (used), Functionality: fully functional, center height: 160 mm, workpiece weight (max.): 250 kg, grinding length: 1,500 mm, grinding wheel diameter: 203 mm, total width: 23,500 mm, total length: 62,500 mm, total height: 17,000 mm, grinding diameter: 320 mm, spindle speed (max.): 1,470 rpm, table speed: 5 mm/min, overall weight: 5,900 kg, year of last overhaul: 2016, power: 7.5 kW (10.20 HP), BHU 320 x 1500 roller grinder. Prod. by TOS Hostivar Czech Republic - Major overhaul 2016. Grinding diameter 320 mm Grinding length 1500 mm Center height 160 mm Dimensions of the grinding wheel 500 x 80 x 203 mm Speed of the grinding spindle 1470 rpm. Grinding spindle - quick adjustment 60 mm Table speed - return 0.005 - 0.05 mm Automatic feed 0.1 - 5 mm/min Workpiece weight max. 250 kg Grinding head rotatable +/- 45° Taper in tailstock MK 5 Workpiece advancement rotatable 90 degrees Grinding spindle drive 7.5 kW Weight of the machine 5900 kg Overall dimensions (L X W X H) 6250 x 2350 x 1700 mm Kslhjtzwy Ijccqpelt

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 2,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, ram stroke: 500 mm, die cushion stroke: 160 mm, clearance between the columns: 800 mm, power: 8.75 kW (11.90 HP), PYE 25 S1M hydraulic press with ejector. Year of manufacture 1990. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Klolhccqjtzwxdepot Down speed 100 mm/sec. Upward speed 450 mm/sec. Ejector force 10 tons. Ejector stroke 160 mm. Power requirement 8,75 kW. Weight 2200kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: good (used), Year of construction: 1981, Functionality: fully functional, ram adjustment: 80 mm, total height: 23,700 mm, table width: 660 mm, table length: 530 mm, stroke adjustment: 95 mm, total width: 12,450 mm, total length: 15,850 mm, overall weight: 4,500 kg, pressing force: 40 t, power: 4 kW (5.44 HP), LEN 40C Eccentric Press. Year of manufacture: 1981 (SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 40 tons - number of strokes in the machine: 70/142 min - number of strokes manual operation: 50 min - slider stroke adjustment: 8-95 mm - slider stroke: 80 mm - table surface: 660 x 530 mm - slider surface: 400 x 250 mm - extension: 265 mm - engine power: 3 / 4 kW - press dimensions: 1585 x 1245 x 2370 mm - weight: 4500 kg The technical condition of the machine is good. It is possible to inspect and check the machine in motion. Klslhstzwt Ueccqpst

Condition: good (used), Year of construction: 1987, ram adjustment: 100 mm, total height: 26,850 mm, table width: 1,000 mm, table length: 720 mm, installation height: 450 mm, stroke adjustment: 120 mm, total width: 12,700 mm, total length: 23,100 mm, overall weight: 10,500 kg, pressing force: 160 t, power: 11 kW (14.96 HP), Eccentric press LE 160 C. Year prod. 1987(ZTS - SLOVAKIA). Parameters: Max. pressure 160ton. Stroke 20-120mm. Number of jumps in single movement 30/min. Number of jumps in continuous movement 50/min. Adjustment of the slider 100mm. Maximum distance of the slider from the table 450mm. Kslhccetzwqgeqpslt Overhang 340mm. Slide attachment surface 750 x 380mm. Clamping area of the table 1000 x 720mm. Mounting hole in the slider fi 50mm. Working pressure of air 0,4 - 0,6 MPa. Motor power 11kW. Overall dimensions (Height x Length x Width) 2685 x 2310 x 1270mm. Weight 10500kg. Technical condition of the machine good. It is possible to make a visual inspection and check the machine in motion.

Condition: good (used), Year of construction: 1988, Functionality: fully functional, total height: 29,750 mm, table width: 1,120 mm, table length: 800 mm, stroke adjustment: 140 mm, total width: 13,500 mm, total length: 25,800 mm, overall weight: 12,800 kg, pressing force: 250 t, height adjustment type: mechanical, Equipment: documentation/manual, Eccentric press LE 250C. Kelotq Eqxohccqpslt Year prod. 1988(ZTS - SLOVAKIA). Max. pressure 250ton. Stroke 30-140mm. Max. number of strokes per minute 45. Adjustment of the slider 110mm. Maximum distance of the slider from the table 450mm. Clamping area of the slider 800 x 475mm. Mounting area of the table 1120 x 800mm. Motor power 20kW. Overall dimensions (Height x Width x Length) 2975 x 1350 x 2580mm. Weight 12800kg.

Condition: excellent (used), Year of construction: 1990, total height: 34,500 mm, installation height: 800 mm, total width: 12,500 mm, total length: 22,000 mm, throat depth: 800 mm, pressing force: 160 t, table width: 900 mm, table length: 630 mm, operating speed: 200 mm/s, overall weight: 7,000 kg, reverse speed: 125 mm/s, ram plate width: 700 mm, ram plate length: 450 mm, ram stroke: 500 mm, type of input current: three-phase, operating pressure: 160 bar, pressure: 250 bar, oil tank capacity: 500 l, power: 17 kW (23.11 HP), PYE 160 S/1M hydraulic press. Year of production 1990, manufacturer VEB Wema Zeulenroda (Germany). Kolhccqoqy E I Ropelt Machine after a general overhaul. Parameters: Maximum pressing force 160 tons. Working pressure 16 MPa. Upper table 700 x 450 mm. Lower table 900 x 630 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 125 mm/sec. Power requirement 17 kW. Oil quantity in the tank 500 l. Weight 7000kg. Height 3450mm, length 2200mm, width 1250mm. Machine in very good condition. It is possible to make a visual inspection and check the machine in motion.

Condition: good (used), Year of construction: 1964, Profile bending machine. Produced by Girggio - ITALY - 1964. Type. PA-14. 8kW main engine. Roller screw drive motor 5.5 kW. Kljlhccqelbilropot Dimensions L x W x H 2200 x 1300 x 1400 Weight approx. 3000kg.

Condition: excellent (used), Year of construction: 1982, LEN 25C Eccentric Press. year of manufacture 1986(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 25 tons - number of jumps in the machine: 76/155 min - number of strokes manual work: 45/60 min - slider stroke adjustment: 8-85 mm - slide stroke: 55 mm - table surface: 560 x 450 mm - slider area: 355 x 225 mm - clearance between columns: 250 mm - number of gears: 2 - engine power: 2.2 / 3 kW - dimensions of the press: 1135 x 1365 x 2145 mm Klelek Nltlshccqpet - weight: 2500 kg

Year of construction: 1983, Condition: good (used), FGSV 32 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Parameters: Table 320 x 1400 mm. Travels: X - 1000 mm, Y - 400 mm, Z - 450 mm. ISO 50. Speed ​​range 35-1800 rpm. Distance between spindle and table 140 - 590 mm. Distance between spindle and column 120 - 520 mm. Max. table load 500 kg. Main engine power 11 kW. The demand for a power of 15 kW. Dimensions: Kolhjh Ir Rmeccqpslt Length X Width X Height: 2735 X 2425 X 2475 mm. Weight 4200 kg.

Condition: good (used), Year of construction: 1983, FGSH 50 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Double-torsion head (new bearings, new gears). Kolhcsdqp Euscqpslt Beam to the level with the eyepiece. Parameters: Table 630 x 1800 mm. Travels: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Speed ​​range 45-1400 rpm. Main engine power 15 kW. The demand for a power of 23 kW. Dimensions: Length X Width X Height: 3200 X 3475 X 2620 mm. Weight 6500 kg.