LüneHanse Vertriebs GmbH

Condition: good (used), Year of construction: 1987, Functionality: fully functional, total width: 2,100 mm, total length: 2,600 mm, total height: 2,100 mm, heating capacity: 0.48 kW (0.65 HP), overall weight: 5,000 kg, Clamping unit Kwslhccev Sa Elsqmow - Heating capacity of the heating plate 0.48 kW per 1 heating rod 0.9 kW per 8 heating rods - Pressure capacity 1,000 kN - Locking cylinder approx. 260 mm

Condition: good (used), Year of construction: 1985, Center height: 750mm Kwolhccjv Sa Efoqmow Center width: 7000mm Bed swing diameter: 1300mm Slide swing diameter: 1000mm Max. workpiece weight: 21 tons Includes Turning unit Milling unit Grinding unit

Condition: excellent (used), Year of construction: 2006, The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. Kjlhev Sa D Ujccqmeww The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany. Dimensin ⇒ 2650 x 2100 x 2100 mm Clamping Force ⇒ 635 KN Working pressure ⇒ 206 bar Piston diameter ⇒ Ø200 mm Stroke ⇒ 140 mm Daylight ⇒ 150/180 mm Heating plant dimension ⇒ 250 x 300 mm Max. mass of heating plant ⇒ 70 kg Oil reservoir ⇒ 100 l Rated power ⇒ 19.66 kW Heater capacity ⇒ 9.6 kW Vacuum motor power ⇒ 2,6 kW Between light curtain and mould area ⇒ 270 mm Stroke of vacuum cover ⇒ 140 mm

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force ⇒ 7,000 kN Operating pressure ⇒ 250 bar Specific pressing pressure ⇒ 610 N/cm² Number of daylight openings ⇒ 2 Installation height with 75 mm heating plate & 20 mm insulation plate ⇒ approx. 2x 190 mm Piston stroke ⇒ approx. 400 mm Piston diameter ⇒ 543 mm Estimated weight ⇒ approx. 16 tonnes Clamping force, rapid traverse ⇒ approx. 2 x 85 kN Retraction force ⇒ approx. 2 x 47 kN Operating pressure ⇒ 300 bar Piston diameter ⇒ 60/40 mm Stroke: 400 mm Hydraulic System: Pressure setting ⇒ 40 - 300 bar Flow rate regulation ⇒ 0 - 99 % Flow rate l/min (HD) ⇒ 45 against 300 bar Drive power ⇒ 22 kW Tank dimensions (LxWxH) ⇒ 1000 x 770 x 535 mm Closing Speed: Rapid traverse ⇒ approx. 40 - 50 mm/s Slow closing ⇒ approx. 0 - 20 mm/s Pressing speed ⇒ approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Kjlhccsv Sa D Ijqmsww Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: excellent (used), Year of construction: 2006, The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. Kslhccsv Sa Dzeqmjww The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany. Dimensin ⇒ 2650 x 2100 x 2100 mm Clamping Force ⇒ 635 KN Working pressure ⇒ 206 bar Piston diameter ⇒ Ø200 mm Stroke ⇒ 140 mm Daylight ⇒ 150/180 mm Heating plant dimension ⇒ 250 x 300 mm Max. mass of heating plant ⇒ 70 kg Oil reservoir ⇒ 100 l Rated power ⇒ 19.66 kW Heater capacity ⇒ 9.6 kW Vacuum motor power ⇒ 2,6 kW Between light curtain and mould area ⇒ 270 mm Stroke of vacuum cover ⇒ 140 mm

Condition: good (used), Year of construction: 2006, Functionality: fully functional, controller manufacturer: SIEMENS, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: SIEMENS 840D Solution Line HV milling head can be used in horizontal and vertical position X-axis: 1,350 mm Y-axis: 770 mm Z-axis: 1,330 mm NC rotary table: Input and display freedom: 0.001° Clamping surface: 800 x 800 mm Max. load: 2,000 kg Interference circle diameter: 1,600 mm Work spindle: Speed range: 20- 6,000 rpm Kwjlhev Sa Dnjccqmsw Tool holder: HSK 100 Drive power: 30 kW Max. torque: 1,080 Nm Stations in the automatic tool changer: 240 Coolant system with fleece gravity filter and 80 bar pressure output Measuring probe REINSHAW OMP60 Oil and Emulsion mist extraction KNOLL chip conveyor Tool breakage control

Condition: excellent (used), Year of construction: 2004, Year of Manufacture ⇒ 2004 Control ⇒ FANUC 16 Ois-MB X-Axis ⇒ 600 mm Y-Axis ⇒ 410 mm Z-Axis ⇒ 460 mm Kwolhcov Sa A Rjcqmsw A-Axis ⇒ -120°/+30° C-Axis ⇒ 360° Spindle Speed ⇒ 12,000 rpm Including approx. 200 tool holders

Condition: good (used), Year of construction: 2014, Functionality: fully functional, Model ⇒ TNL 18-7 Control ⇒ Mitsubishi TX 8i-s Workpiece length (max.) ⇒ approx. 200 mm Workpiece diameter (max.) ⇒ 20 mm Main Spindle: Speed ⇒ 12,000 rpm Power ⇒ 5.5 kW Spindle bore ⇒ 18 mm Measurement system resolution Z ⇒ 0.001 mm Counter Spindle with Tool Turret: Speed ⇒ 12,000 rpm Power ⇒ 3.4 kW Workpiece Ø (max.) ⇒ 21 mm Workpiece clamping depth (max.) ⇒ 180 mm Clamping pressure (max.) ⇒ 30 bar Upper Tool Turret: ⇒ 8 stations Tool holder ⇒ Traub Ø 45 Kolhccqov Sa Awemsww Traverse path X/Y/Z-axis ⇒ 120/65/250 mm Rapid traverse X/Y/Z-axis ⇒ 20/20/40 m/min Resolution X/Y/Z-axis ⇒ 0.0005/0.0005/0.001 mm Lower Tool Turret: ⇒ 7 stations + counter spindle Tool holder ⇒ Traub Ø 45 Traverse path X/Y/Z-axis ⇒ 120/60/250 mm Rapid traverse X/Y/Z-axis ⇒ 20/20/40 m/min Resolution X/Y/Z-axis ⇒ 0.0005/0.0005/0.001 mm

Condition: good (used), Year of construction: 2014, Functionality: fully functional, saw blade diameter ⇒500 mm cutting diameter ⇒ 4,1 mm stroke ⇒ 180 mm total power requirement ⇒ 5,1 kW Drive type: MDERAXX112-21J ⇒4,0 kW Max. Fuse⇒16 A Protection ⇒ IP 54 Pneumatic-Hydraulic equipment ⇒ k115-100 Kelev Sa Akehccqmjww Cutting size: 0° (jaws at the back) W x H ⇒ Ø 150 | 295x70 | 95x375 | 95x95 mm 0° (jaws in front) W x H ⇒ Ø 170 | 265x25 | 90x175 | 155x155 mm 45° W x H ⇒ Ø 155 | 280x50 | 80x170 | 130x130 mm 60° W x H ⇒ Ø 120 | 120x70 | 55x170 | 115x115 mm

Condition: good (used), Year of construction: 2001, Heavy duty tongs good used condition, today's new price 55.000,- EUR Clamping range max.: 400 mm Kolhccsv Sazgsqmoww Clamping range min.: 50 mm

Condition: good (used), turning diameter over bed slide: 600 mm, turning length: 3,000 mm, overall weight: 3,850 kg, Turning diameter over support: 370 mm Max. working travel of the bottom slide: approx. 350 mm Max. working path of the top slide: approx. 125 mm Speed range: 18-900 rpm Main spindle with camlock spindle head size 8 Kwelhcjv Sazaecqmjw Machine dimensions approx. (LxWxH): 5,500 x 1,400 x 1,500 mm

Condition: excellent (used), machine/vehicle number: 77WSX22305E5A-135, BENZ - MONO WSX 05 - 90° Angle Head Mounting ⇒ HSK-A100 Collet ⇒ ER25-A (clamping range: 0.5–16 mm) Max. torque ⇒ 30 Nm Max. speed ⇒ 8,000 rpm Gear ratio ⇒ 1:1 Angle head ⇒ 360° adjustable Kjlhccqsv Rnq Hemjww Weight ⇒ approx. 8 kg The angle head was used with a MAG HÜLLER HILLE - NBH6+, but can also be adapted or adapted for other machines.