Year of construction: 2021, Condition: as good as new (ex-display), Functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulcan transport rollers. In vertical position transport rollers with Perumaan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Fgob Hhotwphwozx Neb Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. The transport rollers are vulcanized and ground. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection

Condition: good (used), Year of construction: 2004, 7 wheels vertical glass bevelling machine number of working meters : 321.000 4 diamond wheels for bevel 1 front arris wheel 2 felt polisching wheels min. glass size : 40 x 40 mm speed : 0,5 - 4,1 m/min. Fsb Hhzovt Svfsx Negb glass thikness : 3 - 20 mm bevel angle : 3° - 45° max. bevel width : 50 mm total power : 20 kw machine dimensions : L : 7,31 x W : 1,8 m x H : 2,3 m weight : 4200 kg working video on demand

Condition: refurbished (used), Year of construction: 1996, Functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, overall weight: 850 kg, Manual Lisec butyl extruder LBH-25V, year of manufacture 1996, butyl storage for 2 x 7,5 kg, for application of profile widths from 6-24 mm, technically and optically completely overhauled in 2024, perfect condition Fgjb Hhzoryr Azox Nsb Currently still being overhauled, availability in approx. 3-4 weeks after completion, EXW Oroshaza/Hungary Please note: the photos shown are sample photos from our last overhaul of the same type. The delivered butyl extruder will look almost identical after the overhaul

Year of construction: 2001, Condition: good (used), The system can also grind miters. Connection value: 20.5kW Fgobsiqghzo Hhzx Nsb Total length: 12500mm

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, temperature: 630 °C, No reserve price - guaranteed sale at the highest bid! Fgjb Hhzxswd I Nze Neb TECHNICAL DETAILS Equipment type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Suitable glass: Clear float glass Temperature: 630 °C Power supply Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total installed power: 250 kW Total weight: 10 t System structure Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Process flow 1. Glass loading: The flat glass is placed on the loading table and transported to the heating section. 2. Heating: In the heating section, the glass is evenly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Annealing: In the cooling section, the glass is cooled evenly and slowly to reduce stress. 5. Glass unloading: The processed glass is transported to the unloading table and removed. EQUIPMENT - Computer - Control cabinet - Power control cabinet - Loading table - Heating section - Coating section - Cooling section - Unloading table

Year of construction: 2013, Condition: ready for operation (used), A Bottero glass cutting machine is available. Cutting thickness range: 2mm/19mm, min. glass width: 148mm, max. glass width: 1850mm, machine weight: approx. 8700kg. An on-site inspection is possible. Feb Hhzxev D I Eko Nsgb

Condition: used, Year of construction: 2004, Lisec Portal Loader PKL-60/30P SBL60/30KR Fob Hhzxorr Tgao Nsgb PKL span 19100 - 19560 mm

Condition: good (used), Year of construction: 1996, Functionality: fully functional, Bavelloni CR 1111 Glass Edging Machine – vertical, 11 wheels Year: 1996 Speed: 0,5 – 5 m/min. Glass thickness: 3 – 30 mm 400 V, 3~, 50 Hz, 24 kW, 63 A Dimensions: 8100 x 1200 x 2300 mm. Weight: 4000 kg Inspection is possible by appointment. Fgsb Hhzev Nag Rox Neb In good working condition. Available: NOW.

Condition: good (used), Year of construction: 2002, Functionality: fully functional, automatic Lisec butyl application machine, left to right, year 2002, consisting of: FRS-25Z, overhead frame conveyor for supply RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device Feb Hhsrx Ryfezx Nogb LBH-25AR, automatic butyl application machine, 2x7,5 kg butyl cylinder capacity, suitable also for Georgian bars RAVS-25/25, frame lift FRS-25A, overhead frame conveyor down to frame set section The machine is available from our stock in Hofkirchen/Austria. The machine can be seen on site on appointment.

Year of construction: 1994, Condition: used, Grinding machine with pump but without water tank. Dimensions: L = 4760 mm, D = 1050 mm, H = 2200 mm, Working height: 760 mm. Feb Hhelp H D Eozx Nogb

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: EcoPurge30, pneumatic purging pump for 2K-metering pump max. flow: 6l/min max. pressure: 21MPa Fgeb Hhzspz H Hqox Nsb pressure ratio: 30:1

Condition: good (used), Year of construction: 2004, machine/vehicle number: GG108F-11031, For sale: Bottero 108 F flat glass grinding machine, year of manufacture 2004. The machine is in daily operation and will be available for pickup in June 2025. I am selling a Bottero 108 F flat glass grinder, year of manufacture 2004. Fgjbjv Uzkne Hhzx Nob The grinder is in daily operation, available for pickup in June 2025.

Condition: refurbished (used), Cutting lines for sale Lisec GFB 37-33 Lisec GFB 60-30 optional autoloaders available: ATH - D 6 positions Feb Hevuhn Tehzx Negb

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, Equipment: documentation/manual, HEGLA, ProLam 46 Fgjb Hhzsv I Ed Eex Nsb Autom. Laminated Glass Cutting Line Year: 2014 In very good technical condition. Inspection is possible by appointment. Available: NOW

Condition: not inspected (used), Year of construction: 1994, Functionality: unexamined, Part of a Lisec DGU line 2.5 x 2.0 m, 1992-1994, consisting of: RSV-27/25, 1992, frame set section PSL-25/20, 1994, assembling station Fgeb Hhzsrtp D Asx Njb Both machines are in working order and can be seen in our warehouse in Hofkirchen/Austria

Year of construction: 1992, Condition: good (used), Dimension: Feb Hsizi Hiohzx Negb Length: 1400mm Width: 1300mm Height: 3450mm Weight: 600kg

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 700 h, CMS Tecnocut Easyline like new Cutting Area / Axis Movement X-Axis: 2.000 mm Y-Axis: 4.000 mm Z-Axis: 150 mm Fgjbetq Eh Ds Hhzx Nsb C-Axis: Optional B-Axis: Optional Options: - 5-Axis cutting head - additional cutting head - Sanddoser - Dredge for abrasive - Antikollisionsfeeler - CAD/CAM IGEMS

Condition: used, SPEED IN A TURN-AROUND SYSTEM The glass comes out perfectly laminated and fully cooled, thanks to the automatic cooling system by forced ventilation. Numerous systems installed worldwide for over 12 years with great success and customer satisfaction. Fgeb Hhzswb U Ryjx Nob Technical details Bag-free technology, one operator only Max workable thickness: 45mm Exclusive RCN project and production Possible process certification (CE) Process time 80% lower than other market's choices Automatic opening of the chamber by means of the hydraulic unit Electrical heaters based on independent sections equipped with convection heat Uniformity of the temperature (tolerance ± 1°C) PLC - 10" touch screen. intuitive, interfaced to the management system Aspiration pump, 100m3/h, with pressure control Perforated kevlar transmission belt with "alligator" fixing system Loading/unloading synchro automatic conveyors/li> Double sensors in/out equipped with alarms and photocells Glass positioning by means of pneumatic lifting pistons and ball-castors Automatic cooling system – RCN Concept Line-up with existing machines and/or assembly systems

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, HEGLA, KPL-MZ-III, 36 Compact Storage System for Glass Year of construction: 2014. Load capacity: 180 T Max. glass sizes: 3210 x 6000 mm, 36 compartments. In very good technical condition. Inspection is possible by appointment. Fsb Hhzsv Iqtxsx Negb Available: NOW

Condition: good (used), Year of construction: 1995, Functionality: fully functional, Part of Lisec insulating glass line for maximum glass size 3500 x 2500 mm, consisting of: RSV-38/25, frame set section Fsb Hhzxor Ncyke Njgb PSL-35/25V, assembling section FPL-35/25, hydraulic flat press RTV-38/25, press outlet conveyor The line is in good working order and still can be seen in operation (DE) on appointment. It will be available in August 2024. In connection with any horizontal washing machine it will be a full IG line. A tilt table after the press outlet conveyor is available optionally.

Condition: good (used), Year of construction: 1992, The bender is set up for aluminum, chromatech and plastic frames. Fjb Hsqhugfjhzx Njgb

Condition: good (used), HEGLA, Harp Racks for Glass Set of Harp Racks / Glass Sorting Trolleys, approx. 30 pieces Fgjb Hev Ipy Dehzx Nob Various types, sizes and colors.

Condition: good (used), Year of construction: 2003, Functionality: fully functional, total width: 10,000 mm, total length: 25,450 mm, total height: 1,450 mm, input voltage: 415 V, input frequency: 50 Hz, compressed air connection: 6 bar, cutting length (max.): 3,700 mm, Lisec cutting line including cutting bridge for laminated glass for max. glass sheets of 3700 mm x 2600 mm (max. cutting width 3300 mm on cutting bridge for laminated glass), year 2003, consisting of: - ATH-37/26D, double sided moveable loading station with 3 stations and 5 glass racks - ESL-37/26RS, cutting table with low-e ginding function (can do cutting and grinding at the same time) - VB-33, cutting bridge for laminated glass Fob Hhzxsv Smugj Negb - BTH, braking table - safety fences This cutting line is still in operation and can be seen on appointment at the current location in Great Britain. Availabiblity of machines: April 2025

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, type of input current: AC, Equipment: documentation/manual, LiSEC, BSV-45ANK, PM-45/8, ARL-45F Autom. Frame Bending Machine BSV-45ANK + 8-slot Profile Magazine PM-45/8 Processing of aluminum, steel, stainless steel, synthetic and composite profiles. VIDEOJET Printer included. Automated Desiccant Filling Machine for Bent Spacer Frames ARL-45F included. Fobjv Igguo Hhzx Nogb Connection: 400V, 50Hz | Year: 2011. In very good technical condition. Inspection is possible by appointment. Available: NOW

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, total length: 21,200 mm, total width: 5,500 mm, total height: 3,500 mm, working height: 500 mm, input voltage: 415 V, type of input current: AC, Lisec edge grinding line, right/left, year 2013, consising of: RTVB-15/20, inlet conveyor 1 of edge grinding machine KSR RTVB-15/20, inlet conveyor 2 of edge grinding machine KSR RTVB-15/20, inlet conveyor 3 of edge grinding machine KSR KSR-21, automatic edge grinding machine RTVB-15/20, outlet conveyor 1 of edge grinding machine KSR RTVB-15/20, inlet conveyor 1 of edge grinding machine KSV WTL-20, glass washing and drying machine with 6 brushes for low-e RTVB-11/20, outlet conveyor 1 of washing machine RTVB-27/20, outlet conveyor 2 of washing machine Technical data: weight: 3500 kg min. glass length: 350 mm Fsb Hhsv Skihszx Nsgb min. glass height: 180 mm min. glass thickness: 2,3 mm max. processing length: 3500 mm max. processing height: 2100 mm max. processing width: 19 mm load: 150 kg/m equivalent continuous sound pressure level: max. 78 dB electrical connection: 3/N/PE-50Hz 415V, 12KVA compressed air supply: 6 bar air consumption: 200 l/min The machine is still in operation and can be seen at the current location in Great Britain on appointment. Availability of machine: April 2025