Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Pedpfezb Idrsx Aicegr Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: excellent (used), Year of construction: 2021, operating hours: 190 h, functionality: fully functional, Screw compressor Kaeser SX 3, year of manufacture 2021, operating hours under load: 190, 8.00 bar, SC2 400 V/50 Hz, effective delivery rate at 7.5 bar: 0.34 m³/min, rated power of the drive motor: 2.2 kW, dimensions W x D x H: 590 x 632 x 970 mm, weight: 140 kg, serial number: 1136-8192796, cyclone separator, manuals available. Pjdpfx Aezd R R Seicsgr

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO XAHS447 STAGE3 portable compressor with aftercooler, fully serviced Pjdpfx Aszcaa Usicjgr Technical data: Capacity: 26.6 m³/min; Working pressure: 12 bar; Year of manufacture: 2015 Engine: CAT C9.3 ACERT 242 kW Operating hours: 0 The compressor is fully operational, ready for work, comes with warranty Net price: PLN 187,000 Gross price: PLN 230,010 Machine imported in excellent condition Below are video links.

Condition: used, Year of construction: 2023, Integrated CompAir L45RS Workstation Manufacturer Gardner Denver Deutschland GmbH (Main Compressor Package), with integrated components from Parker Hannifin Manufacturing S.r.l. (Refrigeration Dryer) and Cordivari S.r.l. (Galvanized Pressure Vessel). Type Variable-speed rotary screw air compressor workstation driven by an integrated frequency inverter system, fully integrated with a downstream refrigeration dryer and a vertical galvanized air receiver tank. Industrial Applications Engineered for continuous, energy-efficient plant compressed air generation in manufacturing, industrial engineering workshops, packaging facilities, and automotive assembly plants. This system relies on variable-speed control to match precise downstream air demands, significantly reducing energy overheads under fluctuating load profiles. Pjdpfxjzcatbs Aicogr Key Technical Specifications * Core Compressor Unit: CompAir L45RS-13A (Version V2) - Technology: Oil-injected rotary screw with frequency inverter (Regulated Speed) - Installed Motor Power: $45 \text{ kW}$ (Max speed: 4,250 R.P.M.) - Volume Flow Rate (Capacity): Up to $8.02 \text{ m}^3\text{/min}$ max - Operating Pressure: $13 \text{ bar g}$ maximum stage pressure - Electrical Supply: $400 \text{ V}$ | 3-Phase | $50 \text{ Hz}$ | Full load current: $97 \text{ A}$ - Control Unit: DELCOS XL touchscreen graphic controller showing 55,404 total running hours and 55,366 hours loaded - Refrigeration Air Dryer: CompAir F95HS (Parker Hannifin), using eco-friendly R407C gas, max pressure $14 \text{ bar}$ - Air Receiver Tank: Cordivari $986 \text{-Liter}$ vertical vessel, maximum allowable pressure $10.67 \text{ bar}$, hot-dip galvanized finish for long-term corrosion resistance Machine Utilization The main CompAir L45RS rotary screw compressor serves as the mechanical core of this processing package, drawing raw air and compressing it via its high-efficiency $45 \text{ kW}$ screw element. The integrated inverter matches motor speeds directly to factory demand to avoid wasteful start-stop cycles. During continuous operations, the CompAir F95HS refrigeration dryer strips moisture out of the compressed air stream to safeguard downstream pneumatic components and tools from rust and water carryover. Finally, the standalone $986\text{-Liter}$ galvanized storage tank acts as an expansion buffer volume to smooth out pressure spikes and handle natural consumption peaks without stressing the main drive. System Highlights * Compressor-Centric Production Station: A complete utility layout engineered to maximize the operational lifespan and performance of the core $45 \text{ kW}$ screw compressor. - Smart Variable Demand Matching: The inverter regulation ensures optimal energy savings, matching actual air consumption rather than running a constant fixed-speed overhead drain. - Robust Diagnostic Integrity: The premium DELCOS XL interface monitors air station diagnostics, recording exact usage metrics, load profiles, and service intervals directly from one integrated control panel.

Condition: new, Year of construction: 2026, overall weight: 227 kg, MANUFACTURER: ATLAS COPCO MODEL: G7FF Serial No: ITJ036731 Year: 2026 Power (kW): 7.5 Output (m³/min): 1.00 Pressure (bar): 10 Operating hours (documented/total): 0 Frequency inverter: NO Built-in dryer: YES – R513a 0.32kg Pjdpfx Asy E Htbjicogr Heat exchanger: NO Cooling (air/water): Air Mounted on tank: YES, 500L Documents: YES New/Used: NEW

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,387 h, functionality: fully functional, overall weight: 191 kg, total length: 1,500 mm, The machine was a backup unit intended to ensure uninterrupted operation, but its capacity is now too small for our needs, so we are selling it. We’ve only turned it on occasionally over the past 10 years or so. It can be tested on-site. Psdpfxjy Ncn As Aicsgr

Condition: excellent (used), Year of construction: 2012, operating hours: 18,460 h, functionality: fully functional, Screw compressor Alup SCK25-10 Pjdpfx Ajy Nmg Noicegr 18.50 kW 10 bar 2.62 m3/min Year of manufacture: 2012 Operating hours: 18,460

Condition: excellent (used), Year of construction: 2014, PROD. ATLASCOPCO TYPE GA75 FF PLUS S/N API619181 YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 14.95 DISCHARGE PRESSURE (bar) 7.25 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER yes, R410a 1.1 kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air Pedpfx Aszicypoicsgr ON TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, KAESER PREMIUM CAR 450/30 reciprocating compressor with a 30L tank Technical data: power supply - 400 V motor power 2.20 kW; effective output: 274 l/min; maximum pressure 10 bar; Podpfx Aiezgc Twscogr Year: 2022 compressor in fully working condition; net price: 3200 PLN gross price: 3936 PLN

Condition: reconditioned (used), ATLAS COPCO C190 step, part number 1616734580 AIA number: 1455196 Pgedpfjzcxtmsx Aicsr

Condition: excellent (used), Year of construction: 2011, operating hours: 50,496 h, functionality: fully functional, Screw Compressor Atlas Copco GA11VSDFF Integrated frequency converter and dryer 11 kW 12.75 bar 1.84 m3/min Year of manufacture: 2011 Operating hours: 50,496 Pjdpsy Ipcwjfx Aicsgr

Condition: excellent (used), Year of construction: 2017, ATLAS COPCO XAVS448 portable compressor, machine with aftercooler after full service Technical specifications: capacity: 25 m3/min; working pressure: 14 Bar; Pgsdpfx Asy Iyyyjicjr year of manufacture: 2017; engine: SCANIA 232 kW; hours: 2632 h; The compressor is fully functional, ready for work, with warranty Net price: 255,000 PLN Gross price: 313,650 PLN The machine was imported in excellent condition Video links below.

Condition: used, Year of construction: 2022, machine/vehicle number: API871724, ✅ Industrial Power – 75 kW (100 hp) motor for high airflow. ✅ Energy Efficiency – VSD+ technology that reduces consumption by up to 50%. ✅ High Performance – Massive airflow up to 13.5 m³/min at 13 bar pressure. ✅ Atlas Copco Reliability – World-renowned Belgian construction for continuous use. Pedpsy Nb Ihsfx Aicjgr Technical Characteristics: Year of manufacture: 2022 | Model: GA75VSD+ | Maximum pressure (MAWP): 13 bar | Motor power: 75 kW (100 hp) | Airflow (Qv): 13.5 m³/min (224.7 l/s) | Motor speed: 6450 rpm | Voltage/Frequency/Phases: 400V / 50Hz / 3Ph | Weight (Mass): 898 kg | Origin: Belgium (Atlas Copco Airpower n.v.)

Condition: good (used), Year of construction: 2008, MANUFACTURER: ATLAS COPCO MODEL: GA45 SERIAL NO.: API594905 YEAR: 2008 Pjdpjyizmvofx Aicjgr POWER (kW): 45 CAPACITY (m3/min): 7.18 PRESSURE (bar): 7.4 > 10

Condition: used, Year of construction: 2016, operating hours: 14,279 h, machine/vehicle number: 644063, delivery quantity 4.61 m³/min at 10 bar delivery quantity 5.23 m³/min at 8 bar operating pressure 10 bar nominal power 30.0 KW Pgedpen Stanofx Aicer operating hours 14,279 load hours 11,148 compressed air connection G1 1/4" sound level 69 dB(A) space requirements length - 1,400 x width - 830 x height - 1,640 mm weight approx. 850 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, BOGE C9LFR screw compressor with frequency inverter, serviced. Technical data: Capacity: 1.20 m3/min (1200 L/min); Engine power: 7.5 kW; Psdjzm Iyiepfx Aicsgr Maximum pressure: 10 bar; Year: 2016; Operating hours: 3383 h; Net price: 11,200 PLN; Gross price: 13,776 PLN. Video below.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Airpress GENESIS 15 500 compressor. Machine with air dryer and a 500L tank, recently serviced. Technical data: Capacity: 1.95 m3/min (1950/min) Engine power: 15 kW Pressure: 10 bar Operating hours: 22175 h Year: 2013 Net price: 12,700 Gross price: 15,621 Compressor in fully working condition. We provide service and maintenance. Video available below. Psdpfxezmua Aj Aicjgr

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ALUP SCK 30-10 screw compressor, serviced machine Pgedpfx Aiozmtdtocsr Technical data: capacity: 3.21 m3/min; engine: 22 kW; maximum pressure: 10 bar; operating hours: 7221 h; year: 2015 The compressor is in full working order. Net price: PLN 14,500 Gross price: PLN 17,835 Video available below.

Condition: excellent (used), functionality: fully functional, KAESER KCT401-100 oil-free reciprocating compressor with a 100L tank. Technical specifications: power supply – 400 V; motor power – 2.40 kW; effective capacity – 275 l/min; maximum pressure – 10 bar; compressor in fully working condition; net price: 2200 PLN; Pedszmvvlopfx Aicjgr gross price: 2706 PLN.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, KAESER PREMIUM CAR 250/30 reciprocating compressor with a 30L tank Technical specifications: power supply - 230 V motor power 1.25 kW effective capacity: 250 l/min maximum pressure 10 bar Pgodpfx Aiozmwarecsr compressor in perfect working order net price: 1900 PLN gross price: 2337 PLN

Condition: used, Year of construction: 1983, functionality: fully functional, Atlas Copco Industrial Screw Compressor – 75 kW – 7.5 m³/min – 8 bar Available: Atlas Copco GA Series industrial screw compressor, a professional machine designed for continuous operation in demanding industrial environments. The compressor is mounted in a soundproofed enclosure with hinged access panels for easy maintenance and inspection. A robust and reliable unit, true to Atlas Copco’s industrial standards, ideal for manufacturing plants, workshops, and compressed air stations. Technical specifications: - Manufacturer: Atlas Copco - Model: Oil-lubricated rotary screw compressor - Motor power: 75 kW - Voltage: 400 V Pgsdpfeytgrfsx Aicor - Current: 157 A - Motor speed: 1460 rpm - Operating pressure: 8 bar - Air delivery: 7,500 l/min (7.5 m³/min) - Year of manufacture: 1983 Features and equipment: - Integrated air/oil separator - Air receiver and auxiliary components included - Soundproofed cabinet - Complete turn-key compressed air unit

Condition: excellent (used), Year of construction: 2016, PROD. ATLASCOPCO TYPE GA55 FF PLUS S/N API623768 YEAR 2016 POWER (kW) 55 CAPACITY (m3/min) 10.44 PRESSURE (bar) 8.25 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER yes, R410a 1.05kg HEAT EXCHANGER no Pgsdpfx Aszmhtcjicjr COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTIONS 2 NEW/USED USED

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, CREEMERS RCC18.5/8 screw compressor, serviced machine Podpfx Ajzmtwaoicogr Technical data: capacity: 2900 L/min; engine power: 18.5 kW; pressure: 8 bar; operating hours: 52598 h!!! year of manufacture: 2006; compressor is in full working order. net price: 9500 PLN gross price: 11685 PLN Video available below.

Condition: new, performance: 984 l/min main engine power: 7.5 kW tank capacity: 500 l maximum operating pressure: 10.0 atm integrated refrigerant dryer electronic adjustment of compressor operating parameters soundproofed cabin (only 67 dB) complies with CE standards manufactured in 2025, NEW Pgsdpfx Aiszpxuvocjr

Condition: excellent (used), functionality: fully functional, KAESER BS61 screw compressor – machine after service Technical specifications: Capacity: 6.10 m3/min (6100/min); Engine power: 37 kW; Maximum pressure: 8.5 bar Operating hours: 25040 h Net price: 8100 Pgjdszp Hr Nepfx Aicsr Gross price: 9963 Compressor in fully working condition. We provide service support. Link to video below.