Surface grinding machine with grinding cycles

ZIERSCH ZT 24

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 600 mm, feed length Y-axis: 220 mm, feed length Z-axis: 540 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 3,000 m/min, table length: 400 mm, table load: 250 kg, table width: 250 mm, Surface grinder Ziersch - ZT 24 MACH-ID 9344 Make: Ziersch Type: ZT 24 Control: Mitsubishi TOUCH Panel Year: 2010 Sturdy, cast iron execution of all machine components High machine weight for maximum rigidity Preloaded precision linear guideways in the vertical- and cross axis (Bosch Rexroth) for highest accuracy Scraped and turcite coated slideways in the longitudinal axis provide excellent vibration absorption and a high-quality grinding surface pattern. Hydraulic longitudinal motion with return cooling unit to achieve good surfaces Electro-mechanic cross- and vertical motion Measuring systems in vertical axis (Heidenhain) for precise positioning Maintenance-free paper band filtration unit with up to 500 l tank and 2-bar pressure pump for effective cooling and rinsing Integrated rinsing channel Magnetic separator for prefiltration of the paper band filtration unit Infinitely variable grinding spindle motor Machine lamp Table-mounted dressing device for high precision and surface finish Electro-permanent magnetic chuck (SAV) with integrated pole changing unit and traction regulation Partial encapsulation of the machine with sliding door and a service door Effective splash guard and an excellent accessibility Preparation of the machine for installation of a coolant mist exhaust unit Control system features: Very comfortable and easy to operate Z-control Automatic vertical infeed with dressing amount compensation Fully automatic grinding cycle with dressing cycles Easy operation via touchscreen Large and clear colour screen (10.4") Electronic handwheel, usable in vertical- and cross axis X - Travel: 600mm Y - Travel: 220mm Z - Travel: 540mm Table Length: 400mm Table Width: 250mm Table load: 250 Gjdpfx Aox Sw H Ejdmett Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Grinding stone dimensions:250 x 38 x 50,8mm Power: 3,7kW Speeds: 4500Rpm Cooling system: Yes Feed rate Y-Axis: 30000mm/min. Length: 3050mm Width: 2050mm Height: 2510mm Weight: 2900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Manufacturer: Deckel Maho Model: DMU 80 monoblock Year of manufacture: 2008 Control: ITNC 530 Technical specifications X travel: 980 mm Y travel: 630 mm Z travel: 630 mm Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Additional information Equipment: Electronic handwheel Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm Gjdpfx Adjxa Eudomott SK 40 / Clamping DIN 69872 32-tool magazine Fixed table 1250 x 700 mm Chip conveyor Coolant system

Condition: good (used), Year of construction: 2010, grinding length: 600 mm, grinding width: 220 mm, Manufacturer: Ziersch Type: ZT 24 Control: Mitsubishi TOUCH panel Year of construction: 2010 Sturdy, cast iron execution of all machine components High machine weight for maximum rigidity Preloaded precision linear guideways in the vertical and cross axis (Bosch Rexroth) for highest accuracy Scraped and turcite coated slideways in the longitudinal axis provide excellent vibration absorption and a high-quality grinding surface pattern. Hydraulic longitudinal motion with return cooling unit to achieve good surfaces Electro-mechanical cross and vertical motion Measuring systems in vertical axis (Heidenhain) for precise positioning Maintenance-free paper band filtration unit with up to 500 l tank and 2-bar pressure pump for effective cooling and rinsing Integrated rinsing channel Magnetic separator for prefiltration of the paper band filtration unit Infinitely variable grinding spindle motor Machine lamp Table-mounted dressing device for high precision and surface finish Electro-permanent magnetic chuck (SAV) with integrated pole changing unit and traction regulation Partial encapsulation of the machine with sliding door and a service door Effective splash guard and excellent accessibility Preparation of the machine for installation of a coolant mist exhaust unit Control system features: Very comfortable and easy to operate Z-control Automatic vertical infeed with dressing amount compensation Fully automatic grinding cycle with dressing cycles Gtodpfx Adjvt Tm Semot Easy operation via touchscreen Large and clear colour screen (10.4") Electronic handwheel, usable in vertical- and cross axis Specifications Metric US Standard X - axis 600 mm Y - axis 220 mm Z - axis 540 mm Table length 400 mm Table width 250 mm Load more specifications Dimensions ( Estimate) Length 3050 mm Width 2050 mm Height 2510 mm Weight 2900 kg Please note: The information on this page has been obtained to the best of our knowledge and belief from the manufacturer. The information is given in good faith but the accuracy cannot be guaranteed. Accordingly, they will not constitute a representation and contractual terms. We recommend that you review all important details.

Condition: used, Year of construction: 1995, functionality: fully functional, Tool grinding machine Jungner Sweden Gtedpfewdihrsx Admot Built in 1995 Accessories

Condition: like new (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, Measuring range: X=500mm, Y=500mm, Z=500mm Length measurement deviation E0 in µm E0/E40 in µm MPE according to ISO 10360-2:2009 2.4 + L/300 at 18°C – 22°C C99 control unit with BP26_SE operator panel Equipment: VAST XXT sensor 6-position probe changer magazine 4-position probe changer rack Calibration sphere with certificate Machine file, technical documentation, operating manual Various probes HP workstation and monitor Additional accessories Software: Calypso Basic CNC Gtodettza Repfx Admet Upgrade to the latest Calypso version and additional options possible

Condition: used, Year of construction: 2010, travel distance X-axis: 1,800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 1,500 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 1,800 rpm, overall weight: 14,000 kg, - Heidenhain iTNC 530 control - 5 axes - Fixed table with integrated rotary table, diameter 750mm (500kg) Gtedpfxex Ni Ezj Admot - CTS (coolant through spindle) 40 bar - 60-tool changer (SK 40) - Milling head with B-axis - Chip conveyor - Spray gun - 3D Quick Set - BLUM laser measuring system - Direct measuring system - 2 rotary clean windows Table clamping area: 2100 x 700 mm Spindle taper ISO: SK 40 Spindle drive: 35 / 25 kW Rapid traverse: 40 m/min Tool changer capacity: 60 positions Space requirement approx. 5.5 x 3.5 x 2.7 m

Condition: used, TECHNICAL DETAILS - Number of axes : 3 - Centers height : 175 [mm] - Distance between centers : 1000 [mm] LINEAR AXES - Grinding length : 500 [mm] - Travels X x Z : 267 X 650 [mm] GRINDING WHEEL HOLDER HEADSTOCK Godpfjuhbydox Admjtt - Continuous orientation : +/-8,5 [°] - External wheel dimensions : 500 x 80 x 203 [mm] - Grinding wheel holder headstock power : 7,5 [kW] - Cutting speed : 44 [m/s] PART HOLDER HEADSTOCK - Taper type : CM5 - Axis C : +/-0.5[°] - Power : 1 [kW] - Rotation speed : 30-1000 [Rpm] TAILSTOCK - Taper type : CM3 - Quill travel : 35 [mm] - Quill diameter : 50 [mm] - Max. part weight between centers : 130 [kg] ELECTRIC SUPPLY - Supply voltage : 400V 50 Hz - Machine dimensions : 2700 x 2350 x H. 2100 [mm] - Weight : 4 000 [kg] HOURS - Working hours : 17.775 [h] EQUIPMENT - CNC FANUC 16i-TA control - Pictogramming - Studer RELEASE C - Electronic handwheel - SENSITRON - Dynamic balancing device : Hydrobalance HBA 40000-1 - Automatic length probe arm MOVOMATIC C25 - Automatic outer diameter probe arm in-process MOVOMATIC - Grinding wheel safety guard with automatic toppling - Fixed grinding device upon part-holder headstock - Coolant tank : 375 [l] - Paper filtering unit - Oil mist extractor - Wheel-holders flanges

Year of construction: 2021, condition: new, Directly available from stock List on request Gtodpfx Adoica Amjmot 550 pieces = 1x truck load ( 15000 kg theoretical weight / 13900 kg actual weight)

Condition: used, Technical details: max. ram stroke: 250 mm workpiece diameter - max.: 80 mm max. workpiece length: max. 900 total power requirement: 1,5 kW Gjdpfxjw Au I Ie Admjtt weight of the machine ca.: 2,1 t

Condition: good (used), functionality: fully functional, Year of construction: 2011, working width: 1,300 mm, throat depth: 410 mm, distance between stands: 960 mm, operating speed: 20 mm/s, reverse speed: 20 mm/s, overall weight: 3,600 kg, total length: 2,740 mm, total width: 2,140 mm, total height: 2,317 mm, input voltage: 200 V, pressing force: 36 t, working length: 1,300 mm, CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 Year of construction: 2011 Pressing force: 352 KN Table length: 1300 mm Bending length: 1300 mm Distance between uprights: 960 mm Frame depth: 410 mm Maximum stroke: 150 mm Godowgw Hhepfx Admjtt Opening: 420 mm Motor power: 200 V with transformer for 400 V Power: 13.2 kVA Total length: 2740 mm Total width: 2140 mm Total height: 2317 mm Machine weight: 3600 kg