CNC Precision Horizontal 5-axis Machinin

YASDA YBM-900N

Condition: good (used), functionality: fully functional, Year of construction: 1989, number of rollers: 3, Over roll 280mm, 12mm Prebending, capacity 18mm 3x top roll diam. Weight 7,100kg Nsdpfxewtp Hae Agnowc

Condition: used, Year of construction: 1999, x-travel 2000 mm y-travel 800 mm z-travel 850 mm control HEIDENHAIN TNC 360 Nsdpfx Asv H Ertsgnowc total power requirement / kW weight of the machine ca. / t required space / m

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Njdpfx Agoh A Sfdsnjwc Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Nwsdjwhp N Djpfx Agnoc

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2-1, 2006, Eurobend CNC 16x4 rebar from coil straightening and cutting machine in used but working condition. 4 x 5 Ton decoilers with pneumatic brakes. 4 x rotor for diameter 8-10-12-16 mm rebar wire straightening and automatic cutting with hydraulic moving cutters. 1 line or even up to 4 lines together cutting. PC with barcode scanner option. Cutting length up to 14 meters and more. Pockets for storage. Chain conveyor for transport of bundles. Nwsdpfx Agerdvq Aonec

Condition: good (used), Year of construction: 2017, Sahinler 4R HSS 20-280 Hydraulic 4-roll plate bending machine – Year 2017. Nodpfx Ajxau D Iognswc Bending length 2050 mm Max. bending capacity - mild steel 20. Upper roll diameter 280 mm Lower roll diameter 280 mm Lateral roll diameter 220 mm Bending speed 1,5 / 5 m/min. Motor power 16 kW

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Nwodpfxotrd T Ts Agnsc Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS Nwjdpfxew Dvnxj Agnec STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry Nwjdpfx Ajfp A I Eognsc and oil-free

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° Nwedodfgg Iepfx Agnsc G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader