Chain hoist, rope hoist, pulley block

Yale lif360

Year of construction: 1987, condition: ready for operation (used), Clamping force: 220kN, min. mould height: 200mm, max. opening stroke: 200mm, max. platen distance: 400mm, ejector stroke: 80mm, machine dimensions X/Y/Z: approx. 2600mm/800mm/1600mm, weight: approx. 760kg. An on-site inspection is possible. Ffodpfsw R Dg Usx Ag Dow

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 Ffodpfxoud N Hdo Ag Dew SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: ready for operation (used), Used Machine Injection Moulding Machine Manufacturer: Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, immediately available Inspection possible by appointment The machine is no longer powered / No coolant connection The machine is professionally stored Technical Data: Clamping force (kN): 800 kN Platen size (mm): 610×610 Tie bar spacing (mm): Daylight opening (mm): 250 Max. (mould) open daylight (mm): 750 Control unit: MC4 Screen text language: German (cannot be changed to other languages) Injection unit: Screw diameter (mm): 45 Injection pressure (bar): 1878 Shot volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil tank capacity (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Ffodpfxeu Ti Srj Ag Dsw Further photos available on request.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 46,000 h, Axes: 4, load capacity: 180kg, working radius: 3200mm, positioning accuracy: +/-0.25mm, max. total load: 430kg, cycle output: 30/min. Control: KR C2: max. control axes: 6, weight: approx. 35kg. Robot weight: approx. 1200kg, dimensions X/Y/Z: approx. 1200mm/1800mm/1700mm, robot set-up dimensions X/Y: approx. 1000mm/1000mm, operating hours: approx. 46000h. Documentation available. An on-site inspection is possible. Ffedst R Trfjpfx Ag Djw

Condition: used, functionality: fully functional, overall weight: 2,400 kg, fuel type: diesel, color: green, axle configuration: 2 axles, operation weight: 2,400 kg, empty load weight: 2,400 kg, Year of construction: 2018, operating hours: 1,030 h, first registration: 11/2018, Equipment: AdBlue, type plate available, Kompresor budowlany Producent: Atlas Copco Typ: XAVS 186 Rok produkcji: 2018 Godziny pracy: ok. 1031 h - Maksymalne ciśnienie: 14 bar - Wydajność: maks. 11,4 m³/h - Moc: 104 kW - Silnik: John Deere Ffedjv Nv H Hjpfx Ag Djw

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 2 l per day Ffedpfx Asqvlw Ijg Djw Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: used, Year of construction: 2009, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,300 kg, load capacity: 100 kg, arm reach: 2,800 mm, Equipment: documentation/manual, - Kuka industrial robot with a horizontal rotary table (fully integrated into the KUKA controller as the 7th axis) - has only 2500 operating hours, has only been used for occasional tests over the last 7 years. Ffedpfovvygkox Ag Dsw

Condition: ready for operation (used), Year of construction: 2022, A Big Bag filling system TeknoConvey is available. Filling capacity: 300kg-1000kg/h, machine dimensions X/Y/Z: approx. 1400mm/1400mm/3600mm. Includes crossbeam, hopper, walker and screw conveyor. Documentation available. An on-site inspection is possible. Fodpfexyzf Ssx Ag Djfw

Condition: good (used), Year of construction: 1987, machine/vehicle number: 36, Offer 25011 Technical data approx.: - Load capacity 250 kg - Outreach 6.0 m - Hook height approx. approx. 5.0 m - Wall mounting flange height approx. approx. 820 mm - Flange width approx. approx. 400 mm - Hole pattern / hole spacing approx. 720 x 325 mm - Slew radius approx. approx. 180° Hoist Brand: DEMAG Type: PK 2 L Serial no: 5710318 Year: 1986 Ffjdpfxsxfirkj Ag Dsw Technical data: - Load capacity 250 kg - Lifting speed 14 m/min - Drive 400 V 0.7 kW - Chain hoist operated via pendant control - Jib arm slewing by hand - Total weight approx. 300 kg - Transport length approx. 6.5 m

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm distance between columns 3680 mm column arm 410 mm dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm - R axis - Adjustment speed: 300 mm/sec. * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm Fedpfxsxcp Rbe Ag Dofw - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions