Diesel Forklift

Yale GDP45

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 8,458 h, load capacity: 4,500 kg, lifting height: 2,800 mm, fuel type: diesel, mast type: duplex, construction height: 2,250 mm, fork carriage width: 1,200 mm, fork length: 1,800 mm, empty load weight: 6,770 kg, total length: 3,200 mm, drive type: Diesel, construction width: 1,400 mm, Diesel forklift Dcsdpfx Aex Enwusm Rsh Load centre of gravity: 500 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Duplex Technical condition: normal Front tyres type: solid rubber Front tyres size: 250-15 se Front tyres condition: 60 - 80% Rear tyres type: solid rubber Rear tyres size: 7.00x12 5.00 se Rear tyres condition: 80 - 100% Battery voltage: 12V Side shift, 3rd valve, rear work light, front work light, half cabin,

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Dcjdjxghngjpfx Am Roh Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, functionality: fully functional, machine/vehicle number: HR14825, Year of construction: 2023, load capacity: 4,500 kg, lifting height: 4,145 mm, free lift: 1,230 mm, fuel type: diesel, mast type: triplex, construction height: 2,215 mm, power: 55 kW (74.78 HP), fork carriage width: 1,372 mm, fork length: 1,200 mm, empty load weight: 7,550 kg, total length: 3,977 mm, drive type: Diesel, construction width: 1,402 mm, Diesel forklift Dedpoyl Duhjfx Am Roch Chassis number: HR14825 Load centre of gravity: 600 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Gearbox: Techntronix 100-1-speed Condition: New device Technical condition: New Front tyres type: Super elastic Front tyres size: 300x15 Front tyres condition: New Rear tyres type: Super elastic Rear tyres size: 28x9-15 Rear tyres condition: New Description: 12 month factory warranty / Max. 2000 operating hours Side shift, 3rd valve, 4th valve, rear work light, front work light, load protection grid, full free lift, CE certificate, rotating beacon, LED, seat, Pedestrian warning light Low-sprung fabric seat FLM36 Low driver's protection roof (flat), 2216 mm Acoustic alarm - activated when reversing - 82-102 dB(A), self-adjusting Yellow rotating beacon - activated via ignition lock

Condition: repair required (used), Year of construction: 2001, fuel type: diesel, Vehicle description Diesel forklift truck YALE GDP45MJ BJ. 2001 lt. Counter 14.437 hours Dcedpfxeh Np R Re Am Roh 4,5 tons lifting capacity 2,32 meters headroom 4,3 meters lifting height 58,7 KW Perkins engine - Triplex free lift mast - Sideshift + extra hydraulic couplings - Half cab - Twin tires ATTENTION ENGINE PROBLEM - FIXED PRICE 8.000,-- net Loading on truck is possible! Also cheap delivery possible !!!

Condition: used, max. working length: 3200 mm; max. material thickness: 3 mm for steel sheet Dcodpoyrbqajfx Am Rsh

Condition: new, Year of construction: 2025, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. As an additional equipment for the machine, we offer: - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. Dcjdjn Hqmmepfx Am Reh The high of snap lock roof panel profile when installed is 26mm: As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Dcsdjn Tnzfjpfx Am Roh Complete with segmented and straight tools

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Djdpfxjm Twnls Am Rech Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: new, Year of construction: 2026, MBM series machine • easy start-up in the engine efficiency class • designed for smooth and efficient one-person operation • produce complete profiles in one operation and repeat them exactly at any time • Wear-free and maintenance-free direct eccentric drive Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the pressure beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam • Motorised rear stop 6-750 mm • foot switch Djdpfxswf Hghe Am Rsch • 16 A connection plug with 5 m cable (within the EU) • connection voltage: 3 x 400 Volt, 50 Hz (within the EU)

Condition: new, functionality: fully functional, Year of construction: 2025, color: black, overall weight: 1,600 kg, empty load weight: 1,600 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Cafe Container Model Imbiss, Office Container | Snack Container | Sales Container | Coffee Container | Model IMBISS | 240cm x 600cm | High-Quality and Flexible Solution Available products can be viewed in our warehouse and picked up directly. Our office and living containers provide an excellent solution for a wide range of applications. They are distinguished by outstanding quality, maximum flexibility, and short delivery times. Technical Details: • Dimensions: 240 x 600 x 250 cm • Weight: 1350 kg Insulation: • Ceiling/Walls: 5cm PUR (Polyurethane) • Robust and special floor chassis • 2 mm galvanized steel sheet • Mineral wool insulation between panels • Optional: 10 cm insulation with PUR, PIR, or mineral wool • Floor: 16 mm fiber cement panel + PVC covering Equipment: • 1x Room • 1x Hatch • 2x Doors • 1x Window Colors: • RAL7016 High-quality workmanship for long-term use Stock & Delivery: • In-stock: Shipping same day • Out-of-stock: Production 2–4 weeks depending on model Dcjdewyc N Ujpfx Am Roh • Worldwide shipping available • Custom sizes available Showroom Address: Im Mannenberg 9a, 53557 Bad Hönningen For more information or tailor-made adjustments, we are happy to assist you!