Hydraulic press

WMW-ZEULENRODA PYE 250 S 1 M

Condition: new, GRATMAXX Bürstentgratmaschine The machine is suitable for the deburring of edges on: Round tubes, square tube, rectangular tube, full materials, profiles of all kinds. Materials: Steel non-ferrous metals, plastics, hard or soft. Work flow: Klodpfx Ajd Hmnfjg Uel After setting the workpiece support and dern side stops the Ridge-workpiece is easily kept on the brush rotating around its own axis, without rotating the workpiece, this movement is also the brush. The workpiece material, the Ridge strength, as well as the desired rounding of the edges determine the pressure and the duration of contact seconds, usually around 1-5. Technical data: Material: Steel, stainless steel and non-ferrous metals (engine speeds 700-1,900 rpm, infinitely variable) Min. workpiece-Ø: 5 mm Maximum work piece-Ø: 100 mm (150 mm) Brush dimensions: 2 piece Ø300 (250) x 50 or 3 piece Ø 300 (250) x 35 Power: 3,0 KW Power: 3.5 KW Operating voltage: 3 ~, 400Volt, 50 Hz Rated current: 8A Back-up fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + Handwheel 74 mm, + dust spout 130 mm Altitude: 1.382 mm Working height: approx. 1.080 mm Depth: 1,209 mm Weight: 310 kg Sound pressure level: At speed 700 rpm 64 dB(A) at a speed 1500 rpm 74 dB(A), when machining a workpiece with maximum speed of 82 dB(A) Scope of delivery: Rotary head Bürstentgratmaschine GratMaxx with power socket without cable Workpiece support table with adjustable angle stop and

Year of construction: 2003, condition: used, pressure 100 t stroke 10-130 mm no. of strokes 30-90 Hub/min throat 330 mm ram - range of adjustment 100 mm Kljdpfx Agsra Rr Ej Uel table surface area 950x660 mm ram surface 540x440 mm hole in the table Ø 230 mm table height 1000 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 7 t

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 73965, Technical specifications: • Manufacturer: Rösler Oberflächentechnik GmbH (Germany) Kledsw Rc Anspfx Ag Ujl • Model: Centrifuge Z 1000 • Year of manufacture: 2016 • Motor power: 11.0 kW • Power supply: 400 V / 50 Hz • Maximum speed: 2,650 rpm • Maximum load: 65 kg • Maximum throughput: 1,000 l/h • Maximum liquid temperature: 40 °C • Maximum charge material temperature: 50 °C • Drum inner diameter: 500 mm • Machine weight: 1,200 kg • Serial number: 73965 New cutting blades, seals, and centrifuge bearings. Fresh water tank 1x 2,000L and waste water tank 1x 2,000L and sludge trolley. Automatic process water refill.

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm Kjdpevzxphefx Ag Uoll table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: good (used), Year of construction: 2018, 1 used welding fume extraction unit Manufacturer: Kemper System: 8000 Year of manufacture: 2018 Technical specifications Filter Number of filter stages: 1 Filtration method: self-cleaning filter Filter cleaning process: rotary nozzle Filter area: approx. 10 m² Number of filter elements: 4 Total filter area: 40 m² Filter type: cartridge filter Filter material: ePTFE membrane Separation efficiency: > 99.99% Dust class: M Basic data Extraction capacity: 3,500 m³/h Dimensions (W x D x H): 962 x 1,413 x 2,110 mm Weight: 590 kg Motor power: 3 kW Rated voltage: 3 x 400 V / 50 Hz Rated current: 6.5 A Kljdpfswxpxyjx Ag Uol Sound pressure level: 65 dB(A) Compression force F: 6 N Additional information Fan type: radial fan, belt-driven Compressed air supply: 5–6 bar Air outlet: 355 mm Air inlet: 355 mm Dust collection container capacity: 34 L Technical data subject to change/errors excepted.

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap Kedsdzqn Dspfx Ag Uoll - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Year of construction: 1998, condition: ready for operation (used), Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible. Kljdpfx Aottbd Tjg Uol

Condition: new, Year of construction: 2025, functionality: fully functional, Eccentric press 160 t / 1600 kN Siemens 1200 PLC Adjustable stroke 16-160 mm Ram adjustment 100 mm Ram plate 740 x 420 mm Ram plate thickness 100 mm Table plate 1200 x 600 mm Kledpjwir U Esfx Ag Uol Table plate thickness 180 mm Motor 15 kW Weight 16,000 kg Lead time for new machines approx. 5 months

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Year of manufacture: 2008 Ksdpfx Agoudbzyo Uoll MODEL: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Control unit brand: Fagor Technical specifications: General data Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition.

Condition: excellent (used), Year of construction: 1969, functionality: fully functional, pressing force: 160 t, table width: 1,200 mm, table length: 800 mm, working height: 600 mm, stroke length: 650 mm, Equipment: safety light barrier, Lasco TSP 160S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2019. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco TSP 160S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2019. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Kljdpev E Rd Ejfx Ag Ujl Possibility to check the machine in operation - The press is still connected to the power supply.