Gear hobbing machine

WMW MODUL ZFWZ 2000/3

Condition: new, empty load weight: 540 kg, maximum load weight: 2,460 kg, overall weight: 3,000 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, tire size: 195/55R10C, Alufelgen, Felge schwarz, Car transporter from the manufacturer ANSSEMS model MSX3000 405x200 Go-Getter. As standard equipment, the Anssems car trailer has an aluminum floor, side edge profile in black, aluminum rims in black, LED lighting, storage box, lashing eyes on the outside of the frame, aluminum drive-on rails can be inserted under the loading area, low chassis, stable welded steel frame, support wheel and a V-drawbar. Iedpfx Aoq Rfl Tea Dsba We also offer accessories for Anssems car transport trailers such as high tarpaulin, side wall attachment, wheel stopper, rear support set, car lashing straps and anti-theft device.

Condition: good (used), Year of construction: 2018, Ref. -No.: 10531 Manufacturer: HONOR SEIKI Type: VL - 400CM Year of construction: 2018 Type of control: CNC-Steuerung Control: Siemens SINUMERIK 840D Storage location: Halberstadt Country of origin: Taiwan Machine-No.: 79XXX C-Axis: Yes C-axis speed: 50 - 2250 RPM Turning Height: 2370 mm Table Diameter: 4000 mm Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 10 m / min Rotate table rotation speed: 1 - 85 RPM Max. Workpiece Weight: 30 kg Ibjdpezc Dz Njfx Aa Dea Max. Turning diameter: 4 mm Distance between faceplate and crossbar support: 820-3320 mm Work feed: mm / min Number of tools in the chain magazine: 24 Crossbar adjustment: 300 x 300 mm Spindle motor drive: AC60/75/100 kW Servo motors (X/Z axes): 5,5 / 5,5 kW Machine length: 9 mm Machine width: 7000 mm Machine Height: 8000/9100 mm Weight Of The Machine Ca.: 115 t Further information: - 2-stage gear change - ATC (Automatic Tool Change) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC15/18.5 Machine is still in production and can be inspected by appointment.

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS Ibedpfeu Dahnex Aa Dja

Condition: used, Year of construction: 2007, functionality: fully functional, feed length Z-axis: 1,250 mm, turning diameter: 3,200 mm, turning height: 2,000 mm, faceplate diameter: 3,200 mm, DOUBLE RAM VERTICAL CNC LATHE KOLOMNA 1532 T KOLOMNA VERTICAL LATHE (VTL) • Table Ø 3,200 mm • Maximum turning diameter Ø 3,200 mm • Maximum workpiece height 2,000 mm • Two CNC-controlled RAMs • RAM travel 1,250 mm • FAGOR 8070 CNC • Motor power 115 kW • Mechanical, hydraulic, electrical and electronic retrofit new in 2007 • Chip conveyor • Complete enclosure • Cooling system • Work light • Refrigerated electrical cabinet Isdpfx Aajx Nhm Rs Djba

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS GEAR HOBBING MACHINE GHM 2500 CNC Description of the main components of the GHM 2500 machine The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head Ibsdpey A Nglofx Aa Dsa -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. It can be connected and tested under power. Very good condition. Ibodpfxjxwl Tbo Aa Doa X 11,500; Y 3,150; Z 2,000; clamping system M 100. Includes support column, 6 plates sized 6,500 x 1,850 x 400 mm. Rotary table E 20. Heads, etc. This is a complete workstation. Weight approx. 200,000 kg.

Condition: used, Year of construction: 1982, Technical details: table length: 2200 mm table width: 2500 mm table load: 16 t total power requirement: 6,5 kW feed speeds: 1,25 - 160 mm/min rapid traverse speed: 2000 mm/min longitudinal adjustment: 1500 mm Ibjdpjvb A Uujfx Aa Dja weight of the machine ca.: 12 t dimensions of the machine ca.: 4,1 x 2,65 x 0,95 m

Condition: good (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter Ibedsgfcnkspfx Aa Dja -Manufacturer: Fette/JAL, 23 hob cutters -Hole: Ø 16 mm 13 pieces, Ø 22 mm 4 pieces, Ø 27 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 250/170/H90 mm -Total weight: 9.8 kg

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm table rotating: 360 motorisch ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel T-Nuten nach DIN 650: Ibjdpsu N Ebdefx Aa Dja a=28mm; h=49mm; b=52mm; c=21mm *

Condition: used, various reduction sleeves for MK mounts 5 x 5 to 4 Iedpfxedgcd As Aa Doba 2 x 5 to 3 1 x 5 to 2 1 x 5 to 1 1 x 6 to 4 1 x 6 to 5 1 x 4 to 3 1 x 3 to 2